About to install a STaSIS LSD and need to know the part numbers for the drive shaft seals...

FixedWing · 12-28-2005, 01:14 PM

The differential is leaking gear oil so I want to replace all three drive shaft seals while it is out. Can anyone tell me the part numbers for these seals?

Thank you. :-)

LSD porn attached for your viewing pleasure.

Stephen

ryans4 · 12-28-2005, 01:28 PM

FixedWing · 12-28-2005, 01:33 PM

BUFFALONOGAROpebFATS · 12-28-2005, 01:35 PM

took my driveshaft out this week to find a torn to bits gasket. must have been folded when the driveshaft was re-installed during a clutch replacement.

also, when i went to pull the shaft down it was kind stuck and i noticed i could hear air moving through something when i would shift the saft back and forth (this would be the pice going into 12a if i read that schem. right) normal or do i have a bad seal? thanks man

joe

ryans4 · 12-28-2005, 01:46 PM

FixedWing · 12-28-2005, 02:15 PM

All cheap except the drive shaft seals which are $30/ea.! Figures.

Still, I'd rather replace everything while it is out so that I know I won't have any more leaking problems.

Stephen

http://www.worldimpex.com/item_detail.html?sku=83569

ryans4 · 12-28-2005, 02:17 PM

...always cheaper then having to go back just to swap out a $30 seal.

12-28-2005, 03:24 PM

Andrew C. · 12-28-2005, 03:33 PM

Dr. Jekyll · 12-28-2005, 09:40 PM

12-28-2005, 01:14 PM	#1
FixedWing AudiWorld Super User Garage is empty, add now Join Date: Dec 2003 Posts: 7,155	About to install a STaSIS LSD and need to know the part numbers for the drive shaft seals... The differential is leaking gear oil so I want to replace all three drive shaft seals while it is out. Can anyone tell me the part numbers for these seals? Thank you. :-) LSD porn attached for your viewing pleasure. Stephen __________________ ================================================== ======================

12-28-2005, 01:28 PM	#2
ryans4 AudiWorld Super User Garage is empty, add now Join Date: Apr 2000 Posts: 7,308	#9 in this pic is: 016 409 399 B - 45x60x8, #6 is: N 905 144 01 - 171x3.5 __________________

12-28-2005, 01:33 PM	#3
FixedWing AudiWorld Super User Garage is empty, add now Join Date: Dec 2003 Posts: 7,155	Thanx Ryan. What about the front drive shaft seal? Guess it is #11 (x 2?). __________________ ================================================== ======================

12-28-2005, 01:35 PM	#4
BUFFALONOGAROpebFATS Member Garage is empty, add now Join Date: Feb 2002 Posts: 3,304	what about the gasket that goes into 12a? took my driveshaft out this week to find a torn to bits gasket. must have been folded when the driveshaft was re-installed during a clutch replacement. also, when i went to pull the shaft down it was kind stuck and i noticed i could hear air moving through something when i would shift the saft back and forth (this would be the pice going into 12a if i read that schem. right) normal or do i have a bad seal? thanks man joe __________________ CNPE founding member

12-28-2005, 01:46 PM	#5
ryans4 AudiWorld Super User Garage is empty, add now Join Date: Apr 2000 Posts: 7,308	#11 is: 857 525 275 (yes 2 of them) and #16 is: 010 325 381 A - 90x4.2 ... __________________

12-28-2005, 02:15 PM	#6
FixedWing AudiWorld Super User Garage is empty, add now Join Date: Dec 2003 Posts: 7,155	I guess that is everything that could possibly leak. Thank you Ryan! All cheap except the drive shaft seals which are $30/ea.! Figures. Still, I'd rather replace everything while it is out so that I know I won't have any more leaking problems. Stephen http://www.worldimpex.com/item_detail.html?sku=83569 __________________ ================================================== ======================

12-28-2005, 02:17 PM	#7
ryans4 AudiWorld Super User Garage is empty, add now Join Date: Apr 2000 Posts: 7,308	i'm the same way, if you're in there, might as well replace the wear crap... ...always cheaper then having to go back just to swap out a $30 seal. __________________

12-28-2005, 03:24 PM	#8
NO.BRAZIL (barf) Guest Garage is empty, add now Posts: n/a	What is number 30? Is that astro glide?

12-28-2005, 03:33 PM	#9
Andrew C. AudiWorld Super User Garage is empty, add now Join Date: Mar 2000 Posts: 10,527	jb weld __________________ - Andrew C. now: 01.5 S4 Avant Pearl/Onyx Widebody was: 98.5 A4 2.8 QMS Pearl/Ecru Pearl White S4 Frappr

12-28-2005, 09:40 PM	#10
Dr. Jekyll AudiWorld Super User Garage is empty, add now Join Date: May 2004 Posts: 7,719	oooo nice :-) gimme a call if you need a hand. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Discussion Forums:

12-28-2005, 09:40 PM
AudiWorld Audi R8 Paid Advertisement