can someone post me a (large) picture of an expanded illustration of the rear dif?

golfrsi · 12-13-2005, 12:45 PM

basically from the center torsion to the very back... part numbers would be incredibly helpful as well.

TIA.

Ryan

Dr.Duct_Mossburg · 12-13-2005, 12:57 PM

go to WWW.Howstuffworks.com it will show u everything and how it works, may not be wat your looking for but i dunno..what kinda hood is that on your sig ?

golfrsi · 12-13-2005, 01:01 PM

golfrsi · 12-13-2005, 01:02 PM

ryans4 · 12-13-2005, 01:20 PM

...since it's the tranny w/ the Torsen, or an exploded pic of the Torsen itself.

Prop Shaft...

Rear Diff...

golfrsi · 12-13-2005, 01:28 PM

package everything looked fine (from the outside of course) but there was a large, grease covered ball bearing sitting in the bottom of the box. Looking at your pics I don't see where this would go... It is roughly 1" in daimeter. this has me very worried... the recycler insists that the case was not cracked open and it was removed from a good running 2001,,, but I'm really nervous right now.

ryans4 · 12-13-2005, 01:32 PM

here is the rear diff housing:

and the entire rear long kneck diff piece:

*ignore the arrow

golfrsi · 12-13-2005, 01:39 PM

basically looking at it, from the "1" back was in one box, and the the neck forward was in another. the large BB was in the first box containing the main dif housing.

X - 1 _ r a c e r · 12-13-2005, 01:40 PM

FixedWing · 12-13-2005, 01:41 PM

If so, what was its original purpose?

Stephen

12-13-2005, 12:45 PM	#1
golfrsi AudiWorld Super User Garage is empty, add now Join Date: Nov 2002 Location: Philadelphia, PA Posts: 3,796	can someone post me a (large) picture of an expanded illustration of the rear dif? basically from the center torsion to the very back... part numbers would be incredibly helpful as well. TIA. Ryan

12-13-2005, 12:57 PM	#2
Dr.Duct_Mossburg AudiWorld Super User Garage is empty, add now Join Date: Nov 2005 Posts: 4,148	This may help.. go to WWW.Howstuffworks.com it will show u everything and how it works, may not be wat your looking for but i dunno..what kinda hood is that on your sig ? __________________ I no grimmer check, Spell Check, or Pruuf reid. Thanks! Thread that started it all.. http://forums.audiworld.com/s4/msgs/2288635.phtml

12-13-2005, 01:01 PM	#3
golfrsi AudiWorld Super User Garage is empty, add now Join Date: Nov 2002 Location: Philadelphia, PA Posts: 3,796	thanks for the link, but I need an actual audi rear end exploded illustration...

12-13-2005, 01:02 PM	#4
golfrsi AudiWorld Super User Garage is empty, add now Join Date: Nov 2002 Location: Philadelphia, PA Posts: 3,796	and the hood is my own...

12-13-2005, 01:20 PM	#5
ryans4 AudiWorld Super User Garage is empty, add now Join Date: Apr 2000 Posts: 7,308	here is prop shaft to rear diff exploded. Torsen pic doesn't help... ...since it's the tranny w/ the Torsen, or an exploded pic of the Torsen itself. Prop Shaft... Rear Diff... __________________

12-13-2005, 01:28 PM	#6
golfrsi AudiWorld Super User Garage is empty, add now Join Date: Nov 2002 Location: Philadelphia, PA Posts: 3,796	that is perfect... since you know the rear diff well.. I bought a used one and when I opened the package everything looked fine (from the outside of course) but there was a large, grease covered ball bearing sitting in the bottom of the box. Looking at your pics I don't see where this would go... It is roughly 1" in daimeter. this has me very worried... the recycler insists that the case was not cracked open and it was removed from a good running 2001,,, but I'm really nervous right now.

12-13-2005, 01:32 PM	#7
ryans4 AudiWorld Super User Garage is empty, add now Join Date: Apr 2000 Posts: 7,308	you bought a whole audi rear end, or just a stock open rear diff (#1 in above pic)? here is the rear diff housing: and the entire rear long kneck diff piece: *ignore the arrow __________________

12-13-2005, 01:39 PM	#8
golfrsi AudiWorld Super User Garage is empty, add now Join Date: Nov 2002 Location: Philadelphia, PA Posts: 3,796	I bought the bottom pic, but it was separated at the middle for shipping purposes. basically looking at it, from the "1" back was in one box, and the the neck forward was in another. the large BB was in the first box containing the main dif housing.

12-13-2005, 01:40 PM	#9
X - 1 _ r a c e r Member Garage is empty, add now Join Date: Jun 2003 Posts: 2,426	CV Joint Ball, probably stuck to one of the drive flanges during packaging __________________ _________________________________________ "Welcome to the wonderful world of S4 ownership. No more happiness for you" VandyS4 ----------------------------------------- 3.8 FATS on 91 octane, no more APR hating! ------------------------------------- If someone stole Troy's Penskes he might not notice until 2008... ...when he goes to sell them (NIB) for something else. _________________________________________

12-13-2005, 01:41 PM	#10
FixedWing AudiWorld Super User Garage is empty, add now Join Date: Dec 2003 Posts: 7,155	Is part # 3 a part that isn't reinstalled if you remove it for some reason? If so, what was its original purpose? Stephen __________________ ================================================== ======================

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Discussion Forums:

12-13-2005, 01:41 PM
AudiWorld Audi R8 Paid Advertisement