A nice and easy 0-100 using MarkP's new calculator...

Mike2kS4 · 11-30-2005, 03:32 PM

This is a graph of a run I made last week as I drove home from work. It was on a long entrance ramp, uphill all the way.

As you can tell, it was a very conservative launch and run, I can easily shave lots of time off this if I beat on it a bit more on a level road

Status update: All the parts *should* be here by Friday along with the replacement engine. It'll be together soon thereafter.

Arcteryx::Stock Rods · 11-30-2005, 03:34 PM

yours up and running in less than one week.

Quattrosaurus · 11-30-2005, 03:35 PM

Mike2kS4 · 11-30-2005, 03:38 PM

BLK01S4::HB B!SH · 11-30-2005, 03:39 PM

Alex (lil' is 300) · 11-30-2005, 03:41 PM

Arcteryx::Stock Rods · 11-30-2005, 03:41 PM

tell you, but i am no longer worried about the stock con rods since your dyno run....so i will stop asking. :P

Arcteryx::Stock Rods · 11-30-2005, 03:44 PM

bubble wrap from home depot the other night....will keep you posted.

as far as my ride...for the last six months i've heard that it's almost finished, so who knows when. i know that the x chip, even with the tweaks, the car will still not be running prime, so their is work still to be done even when i get it back.

Arcteryx::Stock Rods · 11-30-2005, 03:45 PM

Mike2kS4 · 11-30-2005, 03:46 PM

I have plenty of vacation time.

11-30-2005, 03:32 PM	#1
Mike2kS4 Elder Member Account #: 38083 Join Date: Jun 2002 Posts: 12,105	A nice and easy 0-100 using MarkP's new calculator... This is a graph of a run I made last week as I drove home from work. It was on a long entrance ramp, uphill all the way. As you can tell, it was a very conservative launch and run, I can easily shave lots of time off this if I beat on it a bit more on a level road Status update: All the parts should be here by Friday along with the replacement engine. It'll be together soon thereafter. __________________ 2002 S4 Avant, 6spd. Bone stock. <a href="http://www.autospeed.us"> </a> Caveat: Any advice I express regarding potential tuning and such is purely informational. If your knowledge and abilities are not up to the task, no amount of advice can assist.

11-30-2005, 03:34 PM	#2
Arcteryx::Stock Rods Senior Member Account #: 70072 Join Date: Feb 2004 Posts: 8,197	i just can't believe it.....my car is taking forever (nearly a year) and you can have yours up and running in less than one week. __________________ Bored 2.8/9.1CR JE Pistons/034 Rods/RS4 Heads KO4's Port Polished/VAST Meth Injection RS4 Intake Manifold/Throttle Body X-1 Intake/ER IC's ASP Exhaust Heads to Tips Clutchmaster Stage IV with LWFW STaSIS Ohlins 700/800 AWE DTS Alcons 355 6 Piston BBK

11-30-2005, 03:35 PM	#3
Quattrosaurus Member Account #: 3561 Join Date: Apr 2000 Posts: 2,282	Good to hear. Hope it all goes together smoothly __________________ <a href="http://www.villagephotos.com/pubbrowse.asp?folder_id=1013128"> </a>

11-30-2005, 03:38 PM	#4
Mike2kS4 Elder Member Account #: 38083 Join Date: Jun 2002 Posts: 12,105	You're doing lots more internal work. And it significantly helps that I can do the work myself. __________________ 2002 S4 Avant, 6spd. Bone stock. <a href="http://www.autospeed.us"> </a> Caveat: Any advice I express regarding potential tuning and such is purely informational. If your knowledge and abilities are not up to the task, no amount of advice can assist.

11-30-2005, 03:39 PM	#5
BLK01S4::HB B!SH AudiWorld Super User Account #: 52597 Join Date: Mar 2003 Posts: 5,924	2nd that.. I dont know where u get the time. __________________ Stage III Tip : ??? FATS (Race Gas) 3.43 Average Pump gas --------------- Fastest Tiptronic! ET: 12.259@118.25mph :) "Turbos are usually the cheapest/easiest way to add power - Posted by: Corrado79 on 2008-05-21 13:22:49 "Amazing that he could maintain a wedgie and talk out of his ass at the same time. That's one skill he CAN lay claim to. - Skydive@W?? 2007-12-18" --- "good I just added you to my " bitch " VIP list ." -Professional customer service - SIMPPLY@WMS 2007-12-17 --- "i tried the propane file on butane and it blew my ing grill up." - mjtaylor::pipedream 2007-08-23 14:21:46 --- "It takes a problem which we don't have and doesn't even solve it" - Mirror\|rorriM on 2006-09-26 --- "but yeah you want open loop when you go wot ;-)" - PiggieSmalls on 2006-11-10 --- $$$$$$$$$$$$$$$$$ = !@$#!#!!@&%! ----

11-30-2005, 03:41 PM	#6
Alex (lil' is 300) Junior Member Account #: 56963 Join Date: Jun 2003 Posts: 1,331	It'll be all worth it when it's done :-) ...should be coming soon though, right?

11-30-2005, 03:41 PM	#7
Arcteryx::Stock Rods Senior Member Account #: 70072 Join Date: Feb 2004 Posts: 8,197	still shouldn't be taking a year to finish...i'm happy for you. also, forgot to tell you, but i am no longer worried about the stock con rods since your dyno run....so i will stop asking. :P __________________ Bored 2.8/9.1CR JE Pistons/034 Rods/RS4 Heads KO4's Port Polished/VAST Meth Injection RS4 Intake Manifold/Throttle Body X-1 Intake/ER IC's ASP Exhaust Heads to Tips Clutchmaster Stage IV with LWFW STaSIS Ohlins 700/800 AWE DTS Alcons 355 6 Piston BBK

11-30-2005, 03:44 PM	#8
Arcteryx::Stock Rods Senior Member Account #: 70072 Join Date: Feb 2004 Posts: 8,197	yes and i have yet to send the mani....i have the box and bought bubble wrap from home depot the other night....will keep you posted. as far as my ride...for the last six months i've heard that it's almost finished, so who knows when. i know that the x chip, even with the tweaks, the car will still not be running prime, so their is work still to be done even when i get it back. __________________ Bored 2.8/9.1CR JE Pistons/034 Rods/RS4 Heads KO4's Port Polished/VAST Meth Injection RS4 Intake Manifold/Throttle Body X-1 Intake/ER IC's ASP Exhaust Heads to Tips Clutchmaster Stage IV with LWFW STaSIS Ohlins 700/800 AWE DTS Alcons 355 6 Piston BBK

11-30-2005, 03:45 PM	#9
Arcteryx::Stock Rods Senior Member Account #: 70072 Join Date: Feb 2004 Posts: 8,197	must be hard being a bum :P btw....how is your situation turning out? __________________ Bored 2.8/9.1CR JE Pistons/034 Rods/RS4 Heads KO4's Port Polished/VAST Meth Injection RS4 Intake Manifold/Throttle Body X-1 Intake/ER IC's ASP Exhaust Heads to Tips Clutchmaster Stage IV with LWFW STaSIS Ohlins 700/800 AWE DTS Alcons 355 6 Piston BBK

11-30-2005, 03:46 PM	#10
Mike2kS4 Elder Member Account #: 38083 Join Date: Jun 2002 Posts: 12,105	Take half days off at work, wrench at night ;) I have plenty of vacation time. __________________ 2002 S4 Avant, 6spd. Bone stock. <a href="http://www.autospeed.us"> </a> Caveat: Any advice I express regarding potential tuning and such is purely informational. If your knowledge and abilities are not up to the task, no amount of advice can assist.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Discussion Forums:	Advanced Search