K04s and inlets have been ordered! Stage 3- question inside...

Distinct · 11-04-2005, 05:39 PM

I really don't have the money to be doing this so I can't believe that I actually ordered them. This is a big deal of money for me to spending with my other more important financial obligations (Family and house).

I intend on using the K04s with APR K03 software.

1) Can I do this with just a 5 bar FPR and a MBC in parallel? Do I need to have a TCD?

2) Does a Stage 3- produce anymore power compared the same software but with the original K03s?

3) What should I be setting the MBC to hold at? The same that the peak was at when on K03s?

Thanks.

2000s4biturbo::Uli · 11-04-2005, 05:42 PM

Distinct · 11-04-2005, 05:45 PM

Distinct · 11-04-2005, 05:52 PM

Distinct · 11-04-2005, 05:55 PM

2000s4biturbo::Uli · 11-04-2005, 06:00 PM

2000s4biturbo::Uli · 11-04-2005, 06:05 PM

Dr. Jekyll · 11-04-2005, 06:07 PM

car seems to run perfectly fine. It does seem to be on the slow side for a 3- though... I'm sure it could use some lemmitweaks (i don't know jack about tweaking so I haven't messed with it).

Distinct · 11-04-2005, 06:08 PM

Now it's looking like I don't need either? This is good news for me. Simpler and cheaper the better. Do I still need the 5 bar FPR?

Dr. Jekyll · 11-04-2005, 06:10 PM

As long as you aren't running an MBC only then it seems APR tapers boost enough (and doesn't spike enough) to warrent a 5bar.

11-04-2005, 05:39 PM	#1
Distinct Member Garage is empty, add now Join Date: Apr 2003 Posts: 3,511	K04s and inlets have been ordered! Stage 3- question inside... I really don't have the money to be doing this so I can't believe that I actually ordered them. This is a big deal of money for me to spending with my other more important financial obligations (Family and house). I intend on using the K04s with APR K03 software. 1) Can I do this with just a 5 bar FPR and a MBC in parallel? Do I need to have a TCD? 2) Does a Stage 3- produce anymore power compared the same software but with the original K03s? 3) What should I be setting the MBC to hold at? The same that the peak was at when on K03s? Thanks. __________________

11-04-2005, 05:42 PM	#2
2000s4biturbo::Uli Elder Member Garage is empty, add now Join Date: Nov 2003 Posts: 14,238	i dont think apr likes tcd and mbc. __________________ MY BABIES a.k.a. CARS you want the best for your car? tell him i sent you. FATS database NOT stock ;^P nogaro 6mt my00, casa 6mt my01.5

11-04-2005, 05:45 PM	#3
Distinct Member Garage is empty, add now Join Date: Apr 2003 Posts: 3,511	****. This sucks. __________________

11-04-2005, 05:52 PM	#4
Distinct Member Garage is empty, add now Join Date: Apr 2003 Posts: 3,511	I don't suppose you're interested in an APR chip and happen to have a GIAC one :P. __________________

11-04-2005, 05:55 PM	#5
Distinct Member Garage is empty, add now Join Date: Apr 2003 Posts: 3,511	I can get away with just a MBC for APR? __________________

11-04-2005, 06:00 PM	#6
2000s4biturbo::Uli Elder Member Garage is empty, add now Join Date: Nov 2003 Posts: 14,238	no. unless you set the boost really really low __________________ MY BABIES a.k.a. CARS you want the best for your car? tell him i sent you. FATS database NOT stock ;^P nogaro 6mt my00, casa 6mt my01.5

11-04-2005, 06:05 PM	#7
2000s4biturbo::Uli Elder Member Garage is empty, add now Join Date: Nov 2003 Posts: 14,238	well ko4's with weak boost would be lame. a stage 3- should be able to do 16-17psi at redline __________________ MY BABIES a.k.a. CARS you want the best for your car? tell him i sent you. FATS database NOT stock ;^P nogaro 6mt my00, casa 6mt my01.5

11-04-2005, 06:07 PM	#8
Dr. Jekyll AudiWorld Super User Garage is empty, add now Join Date: May 2004 Posts: 7,719	Right now I'm an APR stage 3- (k03 software). No TCD, MBC or 5 bar FPR car seems to run perfectly fine. It does seem to be on the slow side for a 3- though... I'm sure it could use some lemmitweaks (i don't know jack about tweaking so I haven't messed with it). __________________

11-04-2005, 06:08 PM	#9
Distinct Member Garage is empty, add now Join Date: Apr 2003 Posts: 3,511	I STFA (I guess not properly) and thought 3- had to have MBC and TCD... Now it's looking like I don't need either? This is good news for me. Simpler and cheaper the better. Do I still need the 5 bar FPR? __________________

11-04-2005, 06:10 PM	#10
Dr. Jekyll AudiWorld Super User Garage is empty, add now Join Date: May 2004 Posts: 7,719	I asked DAP (he ran this same setup before) and he said no. As long as you aren't running an MBC only then it seems APR tapers boost enough (and doesn't spike enough) to warrent a 5bar. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Discussion Forums:

11-04-2005, 06:10 PM
AudiWorld Audi R8 Paid Advertisement