AWE KO4 software + k04/16 hybrids + Apexi + TCD (update) ... - Page 3

k04/rs6north · 10-17-2005, 05:32 PM

RAD69 · 10-17-2005, 05:58 PM

RAD69 · 10-17-2005, 06:03 PM

-Run the AVC-R wires to the ECU Box
-Remove the connectors from the ECU
-Cut the ty wrap on the (Big)connector cover
-Pull the cover off
-Pull back the tape and cut it off
-look at the numbers on the connector find pin 34
-Verify the wire is Yellow/Blue just to be SURE
-I then used those crimp on things that use a spade connector. That way I can easily remove it if I need to...
Put the cover back on
Put a new ty wrap on, cut the excess
Re-tape it with Friction tape

Ta-Fricken-Da! ;-)

2000s4biturbo::Uli · 10-17-2005, 06:12 PM

i guess i got lucky huh?

RAD69 · 10-17-2005, 06:14 PM

Can't you tell? hehe

2000s4biturbo::Uli · 10-17-2005, 06:20 PM

as long as im not there *zing

haha ill see you tommorow at 2. bring one of those connectors if you have one i can ... use forever.

if not ill solder it.

k04/rs6north · 10-17-2005, 06:23 PM

RAD69 · 10-17-2005, 06:26 PM

LOL - my adjustable TCD is set to 1.31bar... Oh Mike? Get me one too dammit...

ohioko4s4 · 10-18-2005, 08:29 AM

thanks,

RAD69 · 10-18-2005, 08:44 AM

http://forums.audiworld.com/s4/msgs/2141725.phtml

10-17-2005, 05:32 PM	#21
k04/rs6north Junior Member Garage is empty, add now Join Date: Dec 2002 Posts: 1,716	miltek downpipes with cats and miltek 3" exhaust __________________ 2001.5 Nogaro S4 2002 Black Allroad 6spd RIP Matthew Ammon aka O.W. Kenobi

10-17-2005, 05:58 PM	#22
RAD69 Member Garage is empty, add now Join Date: Sep 2001 Posts: 3,015	Damn! I asked him, he never replied to my second email. __________________ Gone but not forgotten - 1998.5 ASS4

10-17-2005, 06:03 PM	#23
RAD69 Member Garage is empty, add now Join Date: Sep 2001 Posts: 3,015	I did this: -Run the AVC-R wires to the ECU Box -Remove the connectors from the ECU -Cut the ty wrap on the (Big)connector cover -Pull the cover off -Pull back the tape and cut it off -look at the numbers on the connector find pin 34 -Verify the wire is Yellow/Blue just to be SURE -I then used those crimp on things that use a spade connector. That way I can easily remove it if I need to... Put the cover back on Put a new ty wrap on, cut the excess Re-tape it with Friction tape Ta-Fricken-Da! ;-) __________________ Gone but not forgotten - 1998.5 ASS4

10-17-2005, 06:12 PM	#24
2000s4biturbo::Uli Elder Member Garage is empty, add now Join Date: Nov 2003 Posts: 14,238	damn. i looked for number and didnt find any. i was strictly relying on colors i guess i got lucky huh? __________________ MY BABIES a.k.a. CARS you want the best for your car? tell him i sent you. FATS database NOT stock ;^P nogaro 6mt my00, casa 6mt my01.5

10-17-2005, 06:14 PM	#25
RAD69 Member Garage is empty, add now Join Date: Sep 2001 Posts: 3,015	Color should be fine. I am just too ANAL Can't you tell? hehe __________________ Gone but not forgotten - 1998.5 ASS4

10-17-2005, 06:20 PM	#26
2000s4biturbo::Uli Elder Member Garage is empty, add now Join Date: Nov 2003 Posts: 14,238	well anal is good as long as im not there *zing haha ill see you tommorow at 2. bring one of those connectors if you have one i can ... use forever. if not ill solder it. __________________ MY BABIES a.k.a. CARS you want the best for your car? tell him i sent you. FATS database NOT stock ;^P nogaro 6mt my00, casa 6mt my01.5

10-17-2005, 06:23 PM	#27
k04/rs6north Junior Member Garage is empty, add now Join Date: Dec 2002 Posts: 1,716	I guy named Mike put in a good word for me - can you post your apexi settings? __________________ 2001.5 Nogaro S4 2002 Black Allroad 6spd RIP Matthew Ammon aka O.W. Kenobi

10-17-2005, 06:26 PM	#28
RAD69 Member Garage is empty, add now Join Date: Sep 2001 Posts: 3,015	He may have misunderstood, I had not figgered out what pressure I needed at that point. LOL - my adjustable TCD is set to 1.31bar... Oh Mike? Get me one too dammit... __________________ Gone but not forgotten - 1998.5 ASS4

10-18-2005, 08:29 AM	#29
ohioko4s4 Junior Member Garage is empty, add now Join Date: May 2002 Posts: 806	How did you wire the throttle input? thanks,

10-18-2005, 08:44 AM	#30
RAD69 Member Garage is empty, add now Join Date: Sep 2001 Posts: 3,015	see my post below http://forums.audiworld.com/s4/msgs/2141725.phtml __________________ Gone but not forgotten - 1998.5 ASS4

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Discussion Forums:

10-18-2005, 08:44 AM
AudiWorld Audi R8 Paid Advertisement