Update on GIAC 3 - code w/ MBC only - Page 3

Imolavirus@BuehnEngineering · 08-17-2005, 02:53 PM

Ochlockonee · 08-17-2005, 02:53 PM

Imolavirus@BuehnEngineering · 08-17-2005, 02:54 PM

Hal_TT::CBP · 08-17-2005, 04:27 PM

1/8th a turn or so and relog - that should allow for a faster ramp-up. Most GIAC stuff I've logged(older code) disregards the N75 function pretty much and ramps the curve based on numerical variables anyway. May be better with what you are running - or not.

k04/rs6north · 08-17-2005, 05:03 PM

B5QShip · 08-17-2005, 05:26 PM

but who cares, anyways

S4saken · 08-17-2005, 06:13 PM

K03/K04s
LaBree
Milltek Dual
Awe S-flow

That's about it. ICs are stock, but planning to do AWE ugrade next.

Ed

S4saken · 08-17-2005, 06:16 PM

Is there any downside to running MBC only?

Seems like you get the fastest possible spool that way.

Ed

S4saken · 08-17-2005, 06:18 PM

more charge pressure to get thru the valve for the same duty cycle, right?

Hal_TT::CBP · 08-17-2005, 07:31 PM

ramp-up curves, so yeah. Same/Same.

08-17-2005, 02:53 PM	#21
Imolavirus@BuehnEngineering AudiWorld Super User Account #: 33927 Join Date: Mar 2002 Posts: 17,946	what is your full mod list? __________________ -Jacob ^^^CLICK SIG FOR BUEHN ENGINEERING WEBSITE^^^ <big><big>Website Here!!!</big></big> <big>Items For Sale</big>

08-17-2005, 02:53 PM	#22
Ochlockonee Member Account #: 72863 Join Date: Mar 2004 Posts: 2,953	Yep. Datum is singular. __________________ "No, a flux capacitor is not compatible with a ham sandwich."

08-17-2005, 02:54 PM	#23
Imolavirus@BuehnEngineering AudiWorld Super User Account #: 33927 Join Date: Mar 2002 Posts: 17,946	nerd alert :p __________________ -Jacob ^^^CLICK SIG FOR BUEHN ENGINEERING WEBSITE^^^ <big><big>Website Here!!!</big></big> <big>Items For Sale</big>

08-17-2005, 04:27 PM	#24
Hal_TT::CBP Senior Member Account #: 3027 Join Date: Mar 2000 Posts: 9,680	GIAC and the N75 have never been good friends... if the N75 is good try turning it c/clockwise 1/8th a turn or so and relog - that should allow for a faster ramp-up. Most GIAC stuff I've logged(older code) disregards the N75 function pretty much and ramps the curve based on numerical variables anyway. May be better with what you are running - or not. __________________ Hal. Whoops... I wanna ride... APR Stg3 (and then some) Sold.

08-17-2005, 05:03 PM	#25
k04/rs6north Junior Member Account #: 47960 Join Date: Dec 2002 Posts: 1,716	with MBC only, are you getting TC between 3000 and 4000rpm - maybe turn boost down to 18.5psi __________________ 2001.5 Nogaro S4 2002 Black Allroad 6spd RIP Matthew Ammon aka O.W. Kenobi

08-17-2005, 05:26 PM	#26
B5QShip AudiWorld Super User Account #: 78120 Join Date: Jul 2004 Posts: 7,743	yep, but it only "sounds" right because everyone says it wrong but who cares, anyways __________________

08-17-2005, 06:13 PM	#27
S4saken Junior Member Account #: 47677 Join Date: Dec 2002 Posts: 578	Re: what is your full mod list? K03/K04s LaBree Milltek Dual Awe S-flow That's about it. ICs are stock, but planning to do AWE ugrade next. Ed

08-17-2005, 06:16 PM	#28
S4saken Junior Member Account #: 47677 Join Date: Dec 2002 Posts: 578	No, throttle data shows no cutting at all. Is there any downside to running MBC only? Seems like you get the fastest possible spool that way. Ed

08-17-2005, 06:18 PM	#29
S4saken Junior Member Account #: 47677 Join Date: Dec 2002 Posts: 578	CCW decreases spring preload, allowing... more charge pressure to get thru the valve for the same duty cycle, right?

08-17-2005, 07:31 PM	#30
Hal_TT::CBP Senior Member Account #: 3027 Join Date: Mar 2000 Posts: 9,680	Well, allows more flow/air through the circuit which in turn allows faster modualtion, which speeds ramp-up curves, so yeah. Same/Same. __________________ Hal. Whoops... I wanna ride... APR Stg3 (and then some) Sold.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Discussion Forums:	Advanced Search