I have some serious Stage III fever after seeing one dyno this past weekend.

[mbox]

I think there was like maybe a week I was satisfied with Stage 2.

Homebrew Stage III K04 list w/ part #'s
(1) = 078 145 703 M / 5304 988 0025 = BORG-WARNER TURBOCHARGER - LEFT
(1) = 078 145 704 M / 5304 988 0026 = BORG-WARNER TURBOCHARGER - RIGHT
(1) = 078 133 609 G = INLET TUBE • UPPER - LEFT
(1) = 078 133 610 G = INLET TUBE • UPPER - RIGHT
(1) = 078 133 609 H = INLET TUBE • LOWER - LEFT
(1) = 078 133 610 H = INLET TUBE • LOWER - RIGHT
(2) = 078 145 719 P = INLET TUBE COUPLER
(4) = N 024 504 4 = INLET TUBE COUPLER CLAMP 40 • 60mm
(8) = N 907 787 01 = STEEL STUD • TURBO TO DOWNPIPE
(2) = 078 133 148 E = SILICONE O-RING • TURBO INLET
(2) = 058 145 757 B = OIL RETURN LINE GASKET
(6) = N 013 818 2 = CRUSH GASKET • 12mm X 16mm X 1.5mm
(2) = 078 145 039 = SILICONE O-RING • MANIFOLD TO TURBO
(2) = 8D0 253 115 F = GASKET • ALUMINUM • TURBO TO DOWNPIPE

I'll also be adding a GIACX, RS4 Clutch (thanks Evil!), FPR, MBC, TCD & Piggy DP's to start then adding Greentops, IC's and PEB fueling.

ah yes.. that'll do it.

Now the only problem is PEB is 747 miles away. :-(

• Atlanta, GA to Utica, MI

[EE:OutofBounds]

[mbox]

[KOpork]

for him to work on my car. It's well worth it if you ask me.

[mbox]

[808Guy]

[mbox]

[mbox]

[KOpork]

PA to MI. Then MI to OK to visit family. Then OK back to PA.

[808Guy]