For those of you who haven't gotten Lemmiwinks to work with a serial emulator,

My2ndS4 · 12-11-2004, 06:27 PM

put the latency timer to 1ms. To do this, plug in your vag-com cable to the usb port you setup to use with lemmiwinks, then open up device manager. Click on ports, and you should see the port that you setup for lemmiwinks. Double click on it, and go to the options tab. Click on the advanced options tab, then put the latency timer to 1ms. This is all from my memory, but it should work.

Specifically, if you get the following error, this procedure should correct it: "ECU uses unknown protocol (KW: 01/8A)"

Thanks to Uwe at Ross-tech for the help!

mtmOla' · 12-11-2004, 06:44 PM

i cant get the thing to connect. I connect through com3 and lemmiwinks says something like bad connection 055 or something like that.

My2ndS4 · 12-12-2004, 12:17 PM

PSmalls::DoggieStyle · 03-31-2005, 05:12 PM

12-11-2004, 06:27 PM	#1
My2ndS4 Member Account #: 46878 Join Date: Nov 2002 Posts: 2,321	For those of you who haven't gotten Lemmiwinks to work with a serial emulator, put the latency timer to 1ms. To do this, plug in your vag-com cable to the usb port you setup to use with lemmiwinks, then open up device manager. Click on ports, and you should see the port that you setup for lemmiwinks. Double click on it, and go to the options tab. Click on the advanced options tab, then put the latency timer to 1ms. This is all from my memory, but it should work. Specifically, if you get the following error, this procedure should correct it: "ECU uses unknown protocol (KW: 01/8A)" Thanks to Uwe at Ross-tech for the help! __________________ Thinking about changing your cv boot? Read this first. OEM Pressure Plate part numbers Dead Battery? My FATS Tests How to install usb to serial converter for lemmiwinks on windows xp (UPDATED!) Adjust the latency timer to 1ms if Lemmiwinks still doesn't work Fuel Pressure Regulator Seal Kit There is a second fuse on the back of the radio I am not a mechanic nor an expert in Audi repair/tuning. In no way are my posts meant to replace professional consultation.

12-11-2004, 06:44 PM	#2
mtmOla' Junior Member Account #: 63720 Join Date: Oct 2003 Posts: 671	how do I get Lemmiwinks to work period? i cant get the thing to connect. I connect through com3 and lemmiwinks says something like bad connection 055 or something like that. __________________ AIM:crypsatir

12-12-2004, 12:17 PM	#3
My2ndS4 Member Account #: 46878 Join Date: Nov 2002 Posts: 2,321	Try the procedure I used in the link in my sig __________________ Thinking about changing your cv boot? Read this first. OEM Pressure Plate part numbers Dead Battery? My FATS Tests How to install usb to serial converter for lemmiwinks on windows xp (UPDATED!) Adjust the latency timer to 1ms if Lemmiwinks still doesn't work Fuel Pressure Regulator Seal Kit There is a second fuse on the back of the radio I am not a mechanic nor an expert in Audi repair/tuning. In no way are my posts meant to replace professional consultation.

03-31-2005, 05:12 PM	#4
PSmalls::DoggieStyle Elder Member Account #: 69223 Join Date: Jan 2004 Posts: 30,285	Damn, I was all excited until I read the end and see it doesn't address the error message I get.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Discussion Forums:	Advanced Search