Can someone decifer a DTC for me, pleez?

LosGatosS4 · 05-01-2001, 02:39 PM

In Control Module 45 - Int. Monitor:

Fault Code: 01382 - Alarm via Anti-theft sensor - front left 35-00

I know my alarm has been set off a few times recently because the sunroof was left open without shutting off the interior motion sensor - is that the cause of this DTC or is something wrong with my alarm?

rao · 05-01-2001, 03:01 PM

funkadelic · 05-01-2001, 03:11 PM

wait a pain in the ass to find it but....straight from the bentley cd:

LosGatosS4 · 05-01-2001, 03:19 PM

any chance I could trouble you to please snap page 01-117 - Adapt sensitivity of sensors ???

I'm trying to adjust the sensitivity of the Interior Monitor but I need the codes/proceedure.

Thanks again!

malcho · 05-01-2001, 03:56 PM

funkadelic · 05-01-2001, 03:57 PM

funkadelic · 05-01-2001, 04:17 PM

1) go into Select Control Module
2) select 45 - Int. Monitor
3) under Advanced Functions, select "Adaptation - 10"
4) Read channel 01
5) enter a value between 50-100 (it should be 100 by default) for the sensitivity of the ultra-sound sensors
6) Save...you're all done!

I tried it at 75 with all my windows slightly cracked, but my alarm sounded after a gusk of wind blew by. Even with the sensitivity turned down further, the sensors may be too close to the windows and wind will trip them (maybe that's why the override switch is there). Lemme know what setting you end up using.

interior motion sensor adjustment

LosGatosS4 · 05-01-2001, 04:22 PM

Deez · 05-01-2001, 05:56 PM

funkadelic · 05-01-2001, 06:00 PM

05-01-2001, 02:39 PM	#1
LosGatosS4 AudiWorld Super User Account #: 9108 Join Date: Aug 2000 Location: Los Gatos (Bay Area), CA Posts: 3,248	Can someone decifer a DTC for me, pleez? In Control Module 45 - Int. Monitor: Fault Code: 01382 - Alarm via Anti-theft sensor - front left 35-00 I know my alarm has been set off a few times recently because the sunroof was left open without shutting off the interior motion sensor - is that the cause of this DTC or is something wrong with my alarm? __________________ 2001.5 S4 Silver/Onyx 6mt K04's/Piggies/Milltek 3"/ER IC's Vogtland Coilovers Volk LE37t Vast SS Previous: '00 S4 Silver/Onyx 6mt AWE/GIAC Stage III

05-01-2001, 03:01 PM	#2
rao Junior Member Account #: 5445 Join Date: May 2000 Posts: 1,353	That's exactly what it means

05-01-2001, 03:11 PM	#3
funkadelic Member Account #: 1515 Join Date: Mar 2000 Posts: 4,296	here ya go wait a pain in the ass to find it but....straight from the bentley cd: __________________ -- www.CarAndModel.com

05-01-2001, 03:19 PM	#4
LosGatosS4 AudiWorld Super User Account #: 9108 Join Date: Aug 2000 Location: Los Gatos (Bay Area), CA Posts: 3,248	THANKS!!!! looks like I need to get the CD... any chance I could trouble you to please snap page 01-117 - Adapt sensitivity of sensors ??? I'm trying to adjust the sensitivity of the Interior Monitor but I need the codes/proceedure. Thanks again! __________________ 2001.5 S4 Silver/Onyx 6mt K04's/Piggies/Milltek 3"/ER IC's Vogtland Coilovers Volk LE37t Vast SS Previous: '00 S4 Silver/Onyx 6mt AWE/GIAC Stage III

05-01-2001, 03:56 PM	#5
malcho Junior Member Account #: 11738 Join Date: Oct 2000 Posts: 853	I can do that for you but, later on tonight when I get home....

05-01-2001, 03:57 PM	#6
funkadelic Member Account #: 1515 Join Date: Mar 2000 Posts: 4,296	i'm trying out the sensitivity adaption right now...will post when i figure it out __________________ -- www.CarAndModel.com

05-01-2001, 04:17 PM	#7
funkadelic Member Account #: 1515 Join Date: Mar 2000 Posts: 4,296	ok here's how to do it w/vag-com 1) go into Select Control Module 2) select 45 - Int. Monitor 3) under Advanced Functions, select "Adaptation - 10" 4) Read channel 01 5) enter a value between 50-100 (it should be 100 by default) for the sensitivity of the ultra-sound sensors 6) Save...you're all done! I tried it at 75 with all my windows slightly cracked, but my alarm sounded after a gusk of wind blew by. Even with the sensitivity turned down further, the sensors may be too close to the windows and wind will trip them (maybe that's why the override switch is there). Lemme know what setting you end up using. interior motion sensor adjustment __________________ -- www.CarAndModel.com

05-01-2001, 04:22 PM	#8
LosGatosS4 AudiWorld Super User Account #: 9108 Join Date: Aug 2000 Location: Los Gatos (Bay Area), CA Posts: 3,248	AWESOME - THANKS!! I'll give it a try tonight and let you know... probably 50 tho :) __________________ 2001.5 S4 Silver/Onyx 6mt K04's/Piggies/Milltek 3"/ER IC's Vogtland Coilovers Volk LE37t Vast SS Previous: '00 S4 Silver/Onyx 6mt AWE/GIAC Stage III

05-01-2001, 05:56 PM	#9
Deez New Member Account #: 17768 Join Date: Mar 2001 Posts: 402	Someone should make this a FAQ/Tech doc __________________ ---- Trust no one.

05-01-2001, 06:00 PM	#10
funkadelic Member Account #: 1515 Join Date: Mar 2000 Posts: 4,296	yeah, guess i can do a short write-up __________________ -- www.CarAndModel.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Discussion Forums:	Advanced Search