who has this manifold?

tuneda4 · 11-12-2004, 05:45 AM

http://www.dnperformance.com/audivw.html

thinking about purchasing this. anyone running it? what do you think?

WunderWagen · 11-12-2004, 09:58 AM

I have it but it is not installed yet. The build quality looks good though. I plan to use it with a K04 running the GIAC J31 programming. David

Matpoc · 11-12-2004, 11:04 AM

tuneda4 · 11-12-2004, 11:20 AM

thats what i am doing. i have someone building me a turbo using diff internals and my existing sport ko3 housing. post pics after the install

BoostedA4tQ · 11-17-2004, 05:22 AM

be on the look out for my post in the near future.

Audi2ptzero · 11-23-2004, 10:31 PM

Not just with the manifold but trying to bolt up the turbo. The reason is that the K03 uses 3 huge bolt that go in from the top, as you can see the manifold will not allow this since there is no room to get the bolts to the holes. Now you can try going with a stud/nut setup, but most of the times the nut will back off because of the high temps or the stud will just snap from the high temps and high stress.

11-12-2004, 09:58 AM	#2
WunderWagen New Member Garage is empty, add now Join Date: Apr 2003 Posts: 101	Re: who has this manifold? I have it but it is not installed yet. The build quality looks good though. I plan to use it with a K04 running the GIAC J31 programming. David

11-12-2004, 11:04 AM	#3
Matpoc New Member Garage is empty, add now Join Date: Feb 2004 Posts: 489	whats the change in % in flow area ,,the site dont say nothing __________________ <a href="http://myspace.com/matpocx"> http://myspace.com/matpocx</a> 2001 a4 odyssey Performance: stock =) Location: unknown NJ Thieves: what up!

11-12-2004, 11:20 AM	#4
tuneda4 AudiWorld Super User Garage is empty, add now Join Date: Jun 2001 Posts: 7,166	Re: who has this manifold? thats what i am doing. i have someone building me a turbo using diff internals and my existing sport ko3 housing. post pics after the install __________________ T U N E D A4 2004 A41.8TQM ultrasport Dolphin/Black REVO//GTRS//ER Sport FMIC//TestPipe//TechtonicsTuningExhaust//Apikol Snub//FK Konigsport Coilovers//)034 mounts//21mm Neuspeed Rear Sway//Neuspeed TIP//Forge//AMS SS//AWE Center vent//South Bend FE clutch//A4 Ecodes//and some other ****. aim; jo9010 www.autophotographics.com

11-17-2004, 05:22 AM	#5
BoostedA4tQ AudiWorld Member Garage is empty, add now Join Date: Nov 2003 Posts: 519	I have the manifold...waiting for it to get it back from ceramic coating to install it... be on the look out for my post in the near future.

11-23-2004, 10:31 PM	#6
Audi2ptzero Elder Member Garage is empty, add now Join Date: Sep 2002 Posts: 14,369	Good luck Not just with the manifold but trying to bolt up the turbo. The reason is that the K03 uses 3 huge bolt that go in from the top, as you can see the manifold will not allow this since there is no room to get the bolts to the holes. Now you can try going with a stud/nut setup, but most of the times the nut will back off because of the high temps or the stud will just snap from the high temps and high stress.

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode