who's car is this, someone should jump on this one - Page 2

**Kris Hansen** · 05-18-2006, 12:02 PM

Durrrrty Dufour · 05-18-2006, 12:52 PM

I dont think thats appropriate for a Mod to do anyways!!!!! At least get one of the AWMA goons to do it for ya!!

:-P

Also, I honestly dont think Chip had any knowledge about what was about to happen with the timing belt or other things. As long as I have known him he has been a stand up guy and very helpful not to mention he seems to take pretty damn good care of his cars.

**Kris Hansen** · 05-18-2006, 12:55 PM

have been done by Joel.. The *seems to* in your comment is the key here.. apparently, that car was held together by a wing and a prayer. It's becoming evident why he had such a hard time selling it. I'm just sorry that Joel found out the hard way.

Durrrrty Dufour · 05-18-2006, 12:58 PM

I dont wanna get into this because I dont know all the facts from either side and Im not taking sides either way.

Regardless of cicumstances it was a sh!tty situation that joel had to deal with.

RallyVermont · 05-18-2006, 01:13 PM

The gospel according to.."WTF, he didn't tell me about this" will be written soon.

busted mani (was able to pull out on of four 10mm bolts straight out, bent, and end broken off in turbo)
bent and pinched FMIC piping
Busted BPV (and he wondered why he was shooting fire and running rich)
bad pressure plate
rear brakes were gone
Timing belt was holdin on for dear life (quarter size chunks missing)
new thermostat and coolant lines
Suspension was bad since day one.. leaking
Cam Tensioner Seal - the most wanted high flow mod of them all
Milltek had to be re aligned and put back in place (bottomed out the car, was rattling when I picked up.."i dont know it just started happening"-chipper)
RS4 Bumper had been cracked re pained and bondo applied..its all coming apart
Both Front wheel bearings died right after purchase
Control Arms bad..

Thats just the small list.. yeah I was lied to and taken advantage of.. or maybe he was just ignorant about how to take care of the damn car. And now I'm paying for it. What an ass. He wont even answer e mails, regarding parts and or money he owes me. The forum needs to know this. I was sold the car on face and forum value.. Yeah what a "chipper" guy he is. All said and done (when ever that may be) I could have bought a new car and moded with all new parts for the same price. I'm just damn pissed.

Cheers,
Joel

Ps. by all means post this all around AW if you want..go for it

RallyVermont · 05-18-2006, 01:20 PM

read the list above.. he was just ignorant.
Everyone is under the impression he is the greatest guy ever.. I found out the hard way. and like Kris said, I wondered why it took so long to sell. So I flew down on a one way ticket from VT to get it. yeah Im pissed, at least I can take care of it. Im broke and cant afford to fix all the issues, but I hope that changes soon or else it will just be half there as long as I have it. I might start a donation to help the sucker fund. I'll stop talking about this befor I get real pissed

Cheers,
Joel

RallyVermont · 05-18-2006, 01:24 PM

**Kris Hansen** · 05-18-2006, 02:05 PM

Durrrrty Dufour · 05-19-2006, 05:45 AM

Im not gonna get into this because I didnt know him long at all before he sold the car so dont know what happened before that. I do know that he is a really good guy and is always willing to help me out at the drop of a hat when i need it.

Like I said to Kris, I will not take sides because Chip is a friend of mine but I do agree it is sh!t what happened with the car and you getting stuck with this. I dont know all the circumstances from before the sale so...

Durrrrty Dufour · 05-19-2006, 05:47 AM

I had no idea it was that much stuff

05-18-2006, 12:02 PM	#11
Kris Hansen Chief of Goat control Account #: 20 Join Date: Oct 2000 Posts: 66,547,962	LOL... runs to make popcorn

05-18-2006, 12:52 PM	#12
Durrrrty Dufour Member Account #: 55449 Join Date: May 2003 Posts: 16,066	Well ask Ed(ness) he does live with him!!! I dont think thats appropriate for a Mod to do anyways!!!!! At least get one of the AWMA goons to do it for ya!! :-P Also, I honestly dont think Chip had any knowledge about what was about to happen with the timing belt or other things. As long as I have known him he has been a stand up guy and very helpful not to mention he seems to take pretty damn good care of his cars. __________________ Disclaimer: chances are something in my post will be spelled wrong, since I am teh suck at teh spelling (and grammar/punctuation). Please refrain from pointing these mistakes out to me as I will not learn from my mistakes. *When I want your opinion, I'll give it to you* AIM: dufsB5turbo High end road bike parts FS Check out: Induktion Motorsports great shop

05-18-2006, 12:55 PM	#13
Kris Hansen Chief of Goat control Account #: 20 Join Date: Oct 2000 Posts: 66,547,962	There is so much that was wrong with that car, or has come up that could not possibly... have been done by Joel.. The seems to in your comment is the key here.. apparently, that car was held together by a wing and a prayer. It's becoming evident why he had such a hard time selling it. I'm just sorry that Joel found out the hard way.

05-18-2006, 12:58 PM	#14
Durrrrty Dufour Member Account #: 55449 Join Date: May 2003 Posts: 16,066	well I dunno... I dont wanna get into this because I dont know all the facts from either side and Im not taking sides either way. Regardless of cicumstances it was a sh!tty situation that joel had to deal with. __________________ Disclaimer: chances are something in my post will be spelled wrong, since I am teh suck at teh spelling (and grammar/punctuation). Please refrain from pointing these mistakes out to me as I will not learn from my mistakes. *When I want your opinion, I'll give it to you* AIM: dufsB5turbo High end road bike parts FS Check out: Induktion Motorsports great shop

05-18-2006, 01:13 PM	#15
RallyVermont Mr. McFeely Account #: 51680 Join Date: Feb 2003 Posts: 17,399	HAHAHA OMG I dont have time to re write the Bible today kids but maybe tomorrow.. The gospel according to.."WTF, he didn't tell me about this" will be written soon. busted mani (was able to pull out on of four 10mm bolts straight out, bent, and end broken off in turbo) bent and pinched FMIC piping Busted BPV (and he wondered why he was shooting fire and running rich) bad pressure plate rear brakes were gone Timing belt was holdin on for dear life (quarter size chunks missing) new thermostat and coolant lines Suspension was bad since day one.. leaking Cam Tensioner Seal - the most wanted high flow mod of them all Milltek had to be re aligned and put back in place (bottomed out the car, was rattling when I picked up.."i dont know it just started happening"-chipper) RS4 Bumper had been cracked re pained and bondo applied..its all coming apart Both Front wheel bearings died right after purchase Control Arms bad.. Thats just the small list.. yeah I was lied to and taken advantage of.. or maybe he was just ignorant about how to take care of the damn car. And now I'm paying for it. What an ass. He wont even answer e mails, regarding parts and or money he owes me. The forum needs to know this. I was sold the car on face and forum value.. Yeah what a "chipper" guy he is. All said and done (when ever that may be) I could have bought a new car and moded with all new parts for the same price. I'm just damn pissed. Cheers, Joel Ps. by all means post this all around AW if you want..go for it __________________ PES T28 tuned 99.5 1.8t \| GIAC 1.3/1.5 bar programming \| updated PES cast exhaust manifold \| precision turbo FMIC \| custom 2.5" aluminum IC piping \| 2.75" milltek exhaust \| 3" test pipe \| dahlback BPV \| stage 2 - 034 motorsport clutch + 15 lbs single mass steel flywheel \| 034 street motor mounts \| 034 street trans mount \| hyperco springs \| grooved bilstein shocks \| stoptechs \| strat short shifter \| Rennline folding tow hook \| Rennline pedal set \| cobra lemans seats \| rieger RS4 bumper \| S4 side skirts\| S4 rear valance \| Stern 18" wheels \| Nitto 555 Previous: 1990 V8q 95 90cs 87 5000cstq

05-18-2006, 01:20 PM	#16
RallyVermont Mr. McFeely Account #: 51680 Join Date: Feb 2003 Posts: 17,399	bull.. everything that has happened would have been noticed by someone that cared about the car read the list above.. he was just ignorant. Everyone is under the impression he is the greatest guy ever.. I found out the hard way. and like Kris said, I wondered why it took so long to sell. So I flew down on a one way ticket from VT to get it. yeah Im pissed, at least I can take care of it. Im broke and cant afford to fix all the issues, but I hope that changes soon or else it will just be half there as long as I have it. I might start a donation to help the sucker fund. I'll stop talking about this befor I get real pissed Cheers, Joel __________________ PES T28 tuned 99.5 1.8t \| GIAC 1.3/1.5 bar programming \| updated PES cast exhaust manifold \| precision turbo FMIC \| custom 2.5" aluminum IC piping \| 2.75" milltek exhaust \| 3" test pipe \| dahlback BPV \| stage 2 - 034 motorsport clutch + 15 lbs single mass steel flywheel \| 034 street motor mounts \| 034 street trans mount \| hyperco springs \| grooved bilstein shocks \| stoptechs \| strat short shifter \| Rennline folding tow hook \| Rennline pedal set \| cobra lemans seats \| rieger RS4 bumper \| S4 side skirts\| S4 rear valance \| Stern 18" wheels \| Nitto 555 Previous: 1990 V8q 95 90cs 87 5000cstq

05-18-2006, 01:24 PM	#17
RallyVermont Mr. McFeely Account #: 51680 Join Date: Feb 2003 Posts: 17,399	haha you know whats coming __________________ PES T28 tuned 99.5 1.8t \| GIAC 1.3/1.5 bar programming \| updated PES cast exhaust manifold \| precision turbo FMIC \| custom 2.5" aluminum IC piping \| 2.75" milltek exhaust \| 3" test pipe \| dahlback BPV \| stage 2 - 034 motorsport clutch + 15 lbs single mass steel flywheel \| 034 street motor mounts \| 034 street trans mount \| hyperco springs \| grooved bilstein shocks \| stoptechs \| strat short shifter \| Rennline folding tow hook \| Rennline pedal set \| cobra lemans seats \| rieger RS4 bumper \| S4 side skirts\| S4 rear valance \| Stern 18" wheels \| Nitto 555 Previous: 1990 V8q 95 90cs 87 5000cstq

05-18-2006, 02:05 PM	#18
Kris Hansen Chief of Goat control Account #: 20 Join Date: Oct 2000 Posts: 66,547,962	Indeed.

05-19-2006, 05:45 AM	#19
Durrrrty Dufour Member Account #: 55449 Join Date: May 2003 Posts: 16,066	ok... Im not gonna get into this because I didnt know him long at all before he sold the car so dont know what happened before that. I do know that he is a really good guy and is always willing to help me out at the drop of a hat when i need it. Like I said to Kris, I will not take sides because Chip is a friend of mine but I do agree it is sh!t what happened with the car and you getting stuck with this. I dont know all the circumstances from before the sale so... __________________ Disclaimer: chances are something in my post will be spelled wrong, since I am teh suck at teh spelling (and grammar/punctuation). Please refrain from pointing these mistakes out to me as I will not learn from my mistakes. *When I want your opinion, I'll give it to you* AIM: dufsB5turbo High end road bike parts FS Check out: Induktion Motorsports great shop

05-19-2006, 05:47 AM	#20
Durrrrty Dufour Member Account #: 55449 Join Date: May 2003 Posts: 16,066	and wow!!!!! I had no idea it was that much stuff __________________ Disclaimer: chances are something in my post will be spelled wrong, since I am teh suck at teh spelling (and grammar/punctuation). Please refrain from pointing these mistakes out to me as I will not learn from my mistakes. *When I want your opinion, I'll give it to you* AIM: dufsB5turbo High end road bike parts FS Check out: Induktion Motorsports great shop

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Discussion Forums:	Advanced Search