Anyone done or heard of anyone that has done the AMD V6 3.2 STAGE 3?
#1
AudiWorld Senior Member
Thread Starter
Anyone done or heard of anyone that has done the AMD V6 3.2 STAGE 3?
<center><img src="http://www.amdtechnik.com/media/images/gallery/57.md.jpg"></center><p>
EDIT:
I found the company: AMD Technik.
It saws it adds 40 HP for 2000.00 pounds.
AMD V6 3.2 STAGE 3
AmD developed sports cam shafts, Milltek cat back exhaust system & AmD custom remap. Due to us developing the cams it will not effect you emissions or idle. Please note on DSG equipped cars we will limit the torque produced to protect the gearbox
Anyone know of someone that has done this?<ul><li><a href="http://www.amdtechnik.com/product.details.cfm?ProductID=58&VariantID=33& amp;ReferenceID=245">http://www.amdtechnik.com/product.details.cfm?ProductID=58&VariantID=33& amp;ReferenceID=245</a</li></ul>
EDIT:
I found the company: AMD Technik.
It saws it adds 40 HP for 2000.00 pounds.
AMD V6 3.2 STAGE 3
AmD developed sports cam shafts, Milltek cat back exhaust system & AmD custom remap. Due to us developing the cams it will not effect you emissions or idle. Please note on DSG equipped cars we will limit the torque produced to protect the gearbox
Anyone know of someone that has done this?<ul><li><a href="http://www.amdtechnik.com/product.details.cfm?ProductID=58&VariantID=33& amp;ReferenceID=245">http://www.amdtechnik.com/product.details.cfm?ProductID=58&VariantID=33& amp;ReferenceID=245</a</li></ul>
#2
AudiWorld Senior Member
Thread Starter
As an alternative, there is also the EIP Kit...
<center><img src="http://www.eiptuning.com/eip/images/cams/schrick_r32_01_300.jpg"></center><p>
From the website...
Schrick Street / Strip Camshaft Set: All 3.2L 24V VR6
For midrange to high end performance.
> 268 Intake Camshaft mated to 264 Exhaust Camshaft
* 11mm Lift (Intake / Exhaust)
* Overlap Intake: 127 degrees
* Overlap Exhaust: 108 degrees
The pdf files that show HP/TQ increases don't look like much. Like 10-15 HP increase and about that in increased torque.<ul><li><a href="http://www.eiptuning.com/eip/camshafts.html">http://www.eiptuning.com/eip/camshafts.html</a</li></ul>
From the website...
Schrick Street / Strip Camshaft Set: All 3.2L 24V VR6
For midrange to high end performance.
> 268 Intake Camshaft mated to 264 Exhaust Camshaft
* 11mm Lift (Intake / Exhaust)
* Overlap Intake: 127 degrees
* Overlap Exhaust: 108 degrees
The pdf files that show HP/TQ increases don't look like much. Like 10-15 HP increase and about that in increased torque.<ul><li><a href="http://www.eiptuning.com/eip/camshafts.html">http://www.eiptuning.com/eip/camshafts.html</a</li></ul>
Thread
Thread Starter
Forum
Replies
Last Post