Are these wheels too aggressive of a fitment?
#1
AudiWorld Member
Thread Starter
Are these wheels too aggressive of a fitment?
For an S6:
20x9.0 +32
20x10.5 +28
5 x 112
66.6 Bore
W/
255/30/20
275/30/20
I'm thinking the rears will pop out too much, but I need a confirmation.
Thanks.
20x9.0 +32
20x10.5 +28
5 x 112
66.6 Bore
W/
255/30/20
275/30/20
I'm thinking the rears will pop out too much, but I need a confirmation.
Thanks.
#2
Check out Rob Cheng's BBS. they are 20x9 et 25. They are the absolute limit to how aggressive I would go.
http://www.robcheng.com/s6bbs/
I don't think a staggered set up makes much sense on such a front heavy AWD car. With the tire sizes you chose, your fronts are going to be smaller than stock. It probably wouldn't fill the wheel well. You'll want 255/35/20 front and 275/30/20 rear if you want a staggered setup with near matching diameters.
http://www.robcheng.com/s6bbs/
I don't think a staggered set up makes much sense on such a front heavy AWD car. With the tire sizes you chose, your fronts are going to be smaller than stock. It probably wouldn't fill the wheel well. You'll want 255/35/20 front and 275/30/20 rear if you want a staggered setup with near matching diameters.
#6
Totally wrong on a number of fronts. 20x9 ET 32 would work, but the rear is WAY out. Would easily stick out past the fender. Also, you really don't want to use staggered fitments on quattro sedans. 255/30 is also too small a diameter, and 275 on a 10.5 wheel is really stretched.
#7
AudiWorld Member
Thread Starter
Totally wrong on a number of fronts. 20x9 ET 32 would work, but the rear is WAY out. Would easily stick out past the fender. Also, you really don't want to use staggered fitments on quattro sedans. 255/30 is also too small a diameter, and 275 on a 10.5 wheel is really stretched.
Trending Topics
#9
AudiWorld Member
Thread Starter