What size (allen) hex head socket to remove axle?
#3
AudiWorld Expert
no size will fit
(properly) because it is not an allen/hex type. They are triple-squares / 12-point.
I believe it is a 10mm for the B5S4 (and 8mm for the B5A4)
<img src="http://ctny.audiworld.com/mark/s4/clutch/4_remove/dsc01970.jpg">
I believe it is a 10mm for the B5S4 (and 8mm for the B5A4)
<img src="http://ctny.audiworld.com/mark/s4/clutch/4_remove/dsc01970.jpg">
#6
AudiWorld Expert
which need to be removed to remove those "axles"....
EDIT: I had thought I had removed my half shafts entirely and was thinking I didn't remove that big bolt - but I only removed the inner CV connections.
Trending Topics
#10
huh? you're losing me. The front axle DOES have a 17mm driveshaft bolt that secures the splines of
the driveshaft the the hub / spindle assembly. The other half of the axle is connected to the transmission by the 10mm triple squares.
Dave
Dave