Car Shakes around 60-70 mph? CV Axle? Tie Rods? Control arm?
#1
Audiworld Junior Member
Thread Starter
Join Date: Jul 2010
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Car Shakes around 60-70 mph? CV Axle? Tie Rods? Control arm?
I know both my cv joints are shot - could this be the reason for the car shaking when i go around 60-70mph? I really dont think its the tires that need balancing. I can hear some clunking while the car shakes. Any idea what it could be?
TIA.
TIA.
#2
AudiWorld Expert
It will be hard to diagnosis when you have a bad item identified already. But the causes can be out of round tires, balancing, bent rims, to even shocks. I'd get the cv joints fixed first since you know they are bad.
#3
Definitely fix the axles first.
They can definitely cause wheel shake, along with tie rods, and control arms being warn!
We have replacements available below!
Click HERE to order or for more information.
Let me know if you have any questions.
Pete
They can definitely cause wheel shake, along with tie rods, and control arms being warn!
We have replacements available below!
Click HERE to order or for more information.
Let me know if you have any questions.
Pete
__________________
:: www.ECStuning.com :: Now with EXTENDED Customer Service hours!! | FIND US ON FACEBOOK!!
Phone: 1.800.924.5172 - Sales: 8:30am to MIDNIGHT EST | Customer Service 8:30am - 8pm EST
Questions? PM us for a quick response! | Email: Pete@ecstuning.com
:: www.ECStuning.com :: Now with EXTENDED Customer Service hours!! | FIND US ON FACEBOOK!!
Phone: 1.800.924.5172 - Sales: 8:30am to MIDNIGHT EST | Customer Service 8:30am - 8pm EST
Questions? PM us for a quick response! | Email: Pete@ecstuning.com
#5
Hey Pete, similar issue……
Audi A6 2.8L ATQ 2000 C5
I have a clicking noise coming from the right side of the engin, I had a local shop put it on the left to see what’s wrong with it. The guy told me that I have 2 worn upper control arms and wishbone needs to be replaced. Not sure what is the wishbone but it’s in the picture. The wishbone goes from next to the control arm going to the engin compartment. That part that makes the clicking noise is the one that connected to the engin compartment. The guy tried to see if it was lose from the top back of the engin, but it was tied on.
I am thinking to replace the full set of control arm the 12 psc. What you recommend? I see the Febi and Meyle… I like the meyle for its 4 years warantee but someone ne said that dealer had issues with them and they started to use Febi.
What do you recommend, and what’s the wishbone thing. And will it be included in the kit? What is the name of that part that I highlited In the picture? what should I order to get this done over with. thanks
Audi A6 2.8L ATQ 2000 C5
I have a clicking noise coming from the right side of the engin, I had a local shop put it on the left to see what’s wrong with it. The guy told me that I have 2 worn upper control arms and wishbone needs to be replaced. Not sure what is the wishbone but it’s in the picture. The wishbone goes from next to the control arm going to the engin compartment. That part that makes the clicking noise is the one that connected to the engin compartment. The guy tried to see if it was lose from the top back of the engin, but it was tied on.
I am thinking to replace the full set of control arm the 12 psc. What you recommend? I see the Febi and Meyle… I like the meyle for its 4 years warantee but someone ne said that dealer had issues with them and they started to use Febi.
What do you recommend, and what’s the wishbone thing. And will it be included in the kit? What is the name of that part that I highlited In the picture? what should I order to get this done over with. thanks
Thread
Thread Starter
Forum
Replies
Last Post
nfs1000f
A6 / S6 (C5 Platform) Discussion
7
11-30-2008 09:24 AM
TimD
A8 / S8 (D2 Platform) Discussion
3
09-19-2005 05:26 AM
jkid
Audi 90 / 80 / Coupe quattro / Cabriolet
3
04-02-2004 03:49 PM