09-07-2016, 01:52 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
- Audi A6 C6 How to Replace Side Marker Bulb<br>Step by step instructions for do-it-yourself repairs.
how to replace side marker bulb?
03-04-2009, 09:21 PM
#2
Re: how to replace side marker bulb?
pull the light housing out from the forward side of it and ti should pop out. Twist the bulb counter clockwise until its free. Pull the bulb out...
03-04-2009, 09:59 PM
#3
AudiWorld Super User
Per Bentley Manual, you need to access the housing from the backside...
by removing the noise damper panel, and then press the clips that hold the housing in-place and push out. Then you remove it as haha bye says.
03-05-2009, 03:08 AM
#4
New Member
Thread Starter
Join Date: Mar 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: Per Bentley Manual, you need to access the housing from the backside...
THanks for the replies.
Is the noise damper panel the plastic piece under the car? The side marker bulb I'm trying to get to in the front passenger side marker.
Haha - the side marker lens is smooth and flush to the car, is there a trick to popping it out?
TIA
Is the noise damper panel the plastic piece under the car? The side marker bulb I'm trying to get to in the front passenger side marker.
Haha - the side marker lens is smooth and flush to the car, is there a trick to popping it out?
TIA
03-05-2009, 05:10 PM
#5
AudiWorld Super User
Yes, that's the panel to remove, and that is why you need to depress the clips from the backside...
before you pull the housing on the outside of the fender.
03-06-2009, 02:52 PM
#6
Don't, sand down the housing and then paint it to match your car, i did, looks much better. But
since you have to get to it anyway because of a fault code i presume, have to go in through the back i believe.
Trending Topics
03-02-2010, 12:14 PM
#10
AudiWorld Member
Join Date: Jan 2006
Location: NYC
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
