i have a tb off an older 12v..
02-05-2008, 09:49 AM
#1
AudiWorld Super User
Thread Starter
Join Date: Feb 2002
Posts: 8,363
Likes: 0
Received 0 Likes
on
0 Posts
i have a tb off an older 12v..
it does not have the same vacuum hose lines iirc.. or maybe it the egr temp sensor went in a diff place.. any ideas if this would be a problem ? on a 96 12v does my question make sense..let me know..lol
02-05-2008, 11:13 AM
#3
AudiWorld Super User
Join Date: Feb 2004
Location: Canada (NCR)
Posts: 7,677
Likes: 0
Received 0 Likes
on
0 Posts
if it is mine for a manual in question....here is the part# I a 99.9% sure it will fit.
<center><img src="http://pictureposter.audiworld.com/70023/dsc03489.jpg"></center><p>from left to right part numbers are....
B2 157 078 061 M
B3 168 078 061 L
B4 108 078 063 K
B2 157 078 061 M
B3 168 078 061 L
B4 108 078 063 K
02-05-2008, 01:01 PM
#4
AudiWorld Super User
Thread Starter
Join Date: Feb 2002
Posts: 8,363
Likes: 0
Received 0 Likes
on
0 Posts
if the part# is listed on the plug..
this one had 2 sets of #s not matching any of yours..lol
first set
0 280 120 431
078 133 154
in comparing pics the one on the right is farthest from being similar in looks then the middle one and the left one looks almost the same as far as i can tell.. i will take a pic once i get home
first set
0 280 120 431
078 133 154
in comparing pics the one on the right is farthest from being similar in looks then the middle one and the left one looks almost the same as far as i can tell.. i will take a pic once i get home
02-05-2008, 01:04 PM
#5
AudiWorld Super User
Join Date: Feb 2004
Location: Canada (NCR)
Posts: 7,677
Likes: 0
Received 0 Likes
on
0 Posts
numbers are off the TB itself, not the plug (TPS)
I am real sure that they will ALL work. but to be safe, lets wait for conformation.
All of them are from B4 12V's
All of them are from B4 12V's
02-05-2008, 01:15 PM
#6
AudiWorld Super User
Thread Starter
Join Date: Feb 2002
Posts: 8,363
Likes: 0
Received 0 Likes
on
0 Posts
the one i have may be off a 100 iirc..
or something like that.. from what the guy i got it from years ago.. when he was moving out of dallas to SanFran with his wife.. but i never really checked it out forsure..
found the # its B2 197 078 061 m
found the # its B2 197 078 061 m
Trending Topics
02-05-2008, 01:49 PM
#8
AudiWorld Super User
Thread Starter
Join Date: Feb 2002
Posts: 8,363
Likes: 0
Received 0 Likes
on
0 Posts
ok here you go..
<center><img src="http://pictureposter.audiworld.com/32880/dscf9196.jpg"></center><p>pic yes i have the part thats missing out of the right side
02-05-2008, 06:37 PM
#9
It's from an automatic but will work fine being used on a manual trans...
FAR harder conversion when you want to make an auto TB from a manual one. The Vac port is in the base and the evaporative port is good. Only thing I see missing or that would preclude it's use is it appears to be missing it's prmary venturi butterfly shaft screws. Getting that b'fly plate back in place is fidgety/hit or miss and can be challenging. Problem is it can only be tested on car but cannot be adjusted when installed. LOTS of R&R's if it aint right. I've nailed em right outta the chute and spent 6 hours R&Ring on others.