AudiWorld Forums: Original "S" Cars Discussion

AudiWorld Exclusive: Truth in 24 Documentary at AFI Fest

First Drive: The All New Audi S4

Exclusive Interview: Peter Schwarzenbauer, Member of the Board of Management of AUDI AG Marketing and Sales

Original 'S' Cars FAQ Digest

[Reader Tips] [Search Forums] [Post Picture] [Post New Thread]

Page: [<<<] [1] ... [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [>>>]
Total Threads: 27452, Total Pages: 550

is there a complete diagram of the breather hose system? need part numbers - Sloooo4esT 2008-11-03 18:33:17 (24 views) Something like this? - UrS4boy 2008-11-03 18:37:18 (76 views) almost but that does not show enough, does not show the other line coming out of the - Sloooo4esT 2008-11-03 18:40:00 (22 views)
Heat/AC Controls dead + Rear Defroster dead + windows fogged = bad deal - EndlessCorners 2008-11-03 17:34:17 (26 views) UPDATE - EndlessCorners 2008-11-04 10:58:08 (20 views) Quick answer = ignition switch. - UrS4boy 2008-11-03 17:42:58 (11 views) Just changed it an hour ago - EndlessCorners 2008-11-03 17:43:28 (13 views) Before or after the problem? If before, then you don't have the right switch or the connector isn't - UrS4boy 2008-11-03 17:45:06 (12 views) I started when I picked it up from the shop today and continued after I changed the swtich. - EndlessCorners 2008-11-03 17:48:52 (10 views) What was the shop doing to your car = clue? - UrS4boy 2008-11-03 17:50:34 (8 views) Emissions work... but they did try an alternate ECU - EndlessCorners 2008-11-03 17:52:15 (17 views) Seems to be a long shot but pins 6, 40, 41 and 50 connect the CC head to the ECU. - UrS4boy 2008-11-03 18:05:59 (16 views) When the sun comes up I will start there. - EndlessCorners 2008-11-03 18:37:21 (8 views)
Dave I want to order a new coil, I believe mine has failed in a way that its either working or not. - sk88erguy 2008-11-03 16:48:45 (42 views) I was going back to the POS but forgot that you already did that. Sounds like there is a broken - UrS4boy 2008-11-03 17:21:51 (34 views) Ya because it gets better with heat, pretty quickly so i highly doubt its in the ECU. Email warren - sk88erguy 2008-11-03 17:29:49 (26 views) Use a pin probe (through the wire insulation) if you are going to check for continuity. - UrS4boy 2008-11-03 17:44:00 (15 views) Audi doesn't like that, leaves an open point for moisture to get in....i won't tell :) - kinderutz 2008-11-03 18:17:37 (14 views) Inside, and underneath the coil cover, with all that heat? Low risk. Seal with red RTV if paranoid. - UrS4boy 2008-11-03 18:38:30 (13 views) Like Dave said, ill order the coil, but test the wires, if i do find a short, i replace the wire.... - sk88erguy 2008-11-03 18:49:26 (15 views)
I need a front passenger side door molding. - UrMarvin 2008-11-03 13:51:43 (42 views) middle. - UrMarvin 2008-11-03 20:37:43 (12 views) Middle or lower? - UrS4boy 2008-11-03 17:46:02 (19 views) If you find the part # Can you post it please.. Thank You - NeversummerS4 2008-11-03 14:58:00 (11 views) Part numbers - turbos4audi 2008-11-03 15:42:15 (37 views) ^^^ middle moulding numbers ^^^ - UrS4boy 2008-11-03 23:10:06 (5 views) Nice... Thank You - NeversummerS4 2008-11-03 16:55:14 (8 views) Genuineaudiparts.com has them for $45 + $7.50 shipping. - turbos4audi 2008-11-03 14:12:58 (37 views)
Any interest in a brand new S6 20VT crate engine (straight from Audi)? Long block, no accessories. - MiniMan 2008-11-03 10:40:10 (96 views) YGM - UrScubed 2008-11-03 15:02:45 (20 views) Price dependent question. $599 = Yes, $5999 = No. More details needed. - UrS4boy 2008-11-03 10:46:51 (40 views) $2k? Willing to part top and bottom end though. - MiniMan 2008-11-03 11:08:13 (45 views) So basically you are looking for an inexpensive brand new head. (?) - UrS4boy 2008-11-03 11:54:32 (26 views) Not quite... I have a brand new top and bottom end that I'm considering selling. - MiniMan 2008-11-03 11:59:55 (36 views)
Who is selling euro headlights nowadays? PG Performance? any others? - quattro20v 2008-11-03 10:20:24 (58 views) Did you get that quote back on the OEM HID ballast? sucks right? - silbergti 2008-11-04 07:07:11 (15 views) yep, $780 for the bulb-ballast - quattro20v 2008-11-04 08:30:11 (12 views) Ouch!! If you want to tinker with my "spare" let me know. - silbergti 2008-11-04 09:39:39 (10 views) why? I'm curious. - mtg 2008-11-03 20:39:31 (25 views) We can do them, pricing isn't so friendly anymore, however still a favorable exchange... - Alex@Europrice 2008-11-03 13:15:18 (51 views) Phone Paul jr. - UrS4boy 2008-11-03 10:47:33 (17 views) 2nd...I've had great transactions with him - quattrothatcould 2008-11-03 13:33:08 (10 views) Who is Paul Jr.? - TabulaRasa 2008-11-03 11:19:55 (28 views) Owner-Manager of PG Performance - quattro20v 2008-11-03 11:31:43 (15 views) 034 - EDIGREG 2008-11-03 10:30:15 (54 views) ECS has the lenses - jjm's quattros 2008-11-03 10:24:43 (22 views)
some pics from Turbogang Audi local meeting. - popdemonic 2008-11-03 09:21:56 (269 views) zomg, Thinkpad X series, awesome! - TabulaRasa 2008-11-03 19:59:35 (10 views) i could use those BMW wires in the trunk :) - kinderutz 2008-11-03 18:22:24 (11 views) That'll be the next mods of coils conversion. - popdemonic 2008-11-03 18:23:51 (9 views) Awesome. How many cars did you part out guys ? :) - oliwer78 2008-11-03 15:52:54 (18 views) Very small amount of S-car so we need to help together... - popdemonic 2008-11-03 18:25:40 (17 views) How many Bhat for a urS4 in Thailand? - fusilier 2008-11-03 15:33:19 (20 views) James,Did you mean Baht(Thai Currency)? - popdemonic 2008-11-03 18:28:58 (13 views) Yes, typo. Baht. - fusilier 2008-11-04 06:28:57 (13 views) yup UrS4,UrS6,the price is vary... - popdemonic 2008-11-04 18:57:02 (11 views) Yeah but thats crazy amount of Baht, Whats the average annual there in baht? - fusilier 2008-11-04 21:38:50 (8 views) James,To be honest I also didn't know about the AAR too.. - popdemonic 2008-11-04 21:56:36 (5 views) AAR? - fusilier 2008-11-05 06:31:11 (10 views) I meant Average Annual Rate.. - popdemonic 2008-11-05 08:03:20 (7 views) Awesome Pop!! ah geez tell me is that a full oettinger c4 kit or mix and match reiger parts?? - AUDIS6DOIT 2008-11-03 13:01:41 (21 views) the green UrS6,that was the first time he attained on our meeting,. - popdemonic 2008-11-03 18:35:38 (25 views) Custom made??blimey!!respect!!! - AUDIS6DOIT 2008-11-04 03:38:13 (10 views) I 2nd that question?? - NeversummerS4 2008-11-03 15:19:05 (11 views) Nice Audis! and thats a nice Aero too... - QuattroPower88 2008-11-03 10:59:06 (22 views) Yup,that's Aero has Stage4+ with GT series turbo on it. - popdemonic 2008-11-03 18:39:31 (9 views) that's really neat. You guys worked into the night? - quattro.pilot 2008-11-03 10:06:32 (25 views) tropics = sun goes down 6-6:30 everyday of the year = evenings are dark. - UrS4boy 2008-11-03 10:16:43 (49 views) Is there anything you don't know? Man, I'd love to know 1/2 of what you've forgotten. - 1stturbo 2008-11-03 12:37:32 (20 views) I don't know LOTS of stuff. I spent one month each in Australia, SriLanka and Vietnam so I have - UrS4boy 2008-11-03 13:03:29 (43 views) The Librarian! ;-) wanna come to Thailand? - popdemonic 2008-11-03 18:42:24 (14 views) Maybe. My sister is in working in KL. - UrS4boy 2008-11-03 19:12:58 (12 views) The LPG club! - turbos4audi 2008-11-03 09:27:58 (29 views) some S-car has LPG sequential injection there.. - popdemonic 2008-11-03 09:31:38 (47 views) Hey thats great to know pop!!thats a way to combat uk fuel prices!! :-) - AUDIS6DOIT 2008-11-03 13:06:03 (15 views) Damien,I found many cars in UK were running with LPG... - popdemonic 2008-11-03 18:45:34 (12 views) Will have to check out the uk s2 forum thanks pop....another one for my urs6 one day list!! :-) - AUDIS6DOIT 2008-11-04 03:17:13 (11 views)
95.5 Avant FS in Denver, 137k miles. - Tom (90Carat) 2008-11-03 08:11:19 (185 views) LOL at the MPG - gietl 2008-11-03 09:43:19 (71 views) I've seen 28 but mostly get around 25ish hwy. - JAMS6 2008-11-03 16:52:09 (26 views) completely feasible... start at Loveland Pass, point car at Denver. ;^) - quattro5.v.2 2008-11-03 10:15:59 (19 views) Exactly, though I will admit - gietl 2008-11-03 12:22:30 (42 views) ....And your car isn't all that stock. 27 is still a touch high, though. - Tom (90Carat) 2008-11-03 12:53:52 (18 views) Re: ....And your car isn't all that stock. 27 is still a touch high, though. - gietl 2008-11-03 14:14:36 (27 views) I would if... - Tom (90Carat) 2008-11-03 14:44:57 (30 views) Re: I would if... - gietl 2008-11-03 14:48:18 (25 views) Remodel the family room, big enuf, so you can park the Avant as the COUCH.. ! - es-car-go 2008-11-03 16:15:19 (15 views) That's SMM (tm) - UrS4boy 2008-11-03 09:51:04 (58 views) wow, nice - Zwoobah 2008-11-03 08:52:02 (25 views)
Is this the right injector for our cars? - Dace Voit 2008-11-03 07:14:56 (49 views) According to Worldpac.....those are the right injectors - EB_1920 2008-11-03 22:52:19 (12 views) by the way....I've got some used OEM injectors for sale. email me if interested - EB_1920 2008-11-04 10:21:41 (11 views) Not according to this (there is something wrong with those Bosch numbers) - UrS4boy 2008-11-03 07:47:31 (29 views)
bogus PO records and/or PO ripped off... trust receipts much? - quattro5.v.2 2008-11-03 05:26:59 (105 views) The answer is ZERO, I drive a CAR, NOT RECIPTS. Most of the sellers seem not to get my point usually - oliwer78 2008-11-03 16:02:52 (29 views) absolutely, I ID'd before buying that he said 'dealer' but labor reciepts were all gas stations. - quattro5.v.2 2008-11-04 07:47:29 (16 views) He told me he used to hide good stuff in there... - oliwer78 2008-11-07 11:32:25 (3 views) Depends on the task and who did it... - UrScubed 2008-11-03 08:53:59 (40 views) 50/50 split - 450exc115 2008-11-03 08:08:53 (43 views) yeah, it looks OK... <he says waiting for the sound of valves hitting pistons> - quattro5.v.2 2008-11-03 10:07:20 (18 views) Not with my S4, but with a TR6 I use to own, the PO actually fabricated work orders for the car on - turbos4audi 2008-11-03 06:32:01 (70 views) that's def much worse. i have to remember that trick next time I sell a car. buy, i mean buy. ;^) - quattro5.v.2 2008-11-03 10:03:31 (18 views)
3 Bar GM external MAP found in an ABY S2 (not OE) for future reference - UrS4boy 2008-11-02 22:05:41 (144 views) I had an mtm 1+ chip in my 93 s4 setup that way - a4kquattro 2008-11-03 06:40:40 (69 views) Where do I get one? - \|skolnick 2008-11-03 13:01:44 (14 views) gm 3 bar map? ebay is a reasonable source. - a4kquattro 2008-11-03 14:03:08 (17 views) output voltage graphs are very close, gm a hair more conservative - AndrewWK 2008-11-03 10:27:15 (25 views) Ditto ! Loved it on my first UrS4. The GM 3 bar worked flawlessly from day uno. - //Swordfish 2008-11-03 10:08:25 (18 views) is the signal output the same as the 3 bar bosch one? - habe Ich gesagt 2008-11-03 05:55:29 (18 views) Don't know. Not advocating its use, just providing info. More info here: - UrS4boy 2008-11-03 06:29:05 (39 views) makes ecu removal a snap - AndrewWK 2008-11-02 23:55:11 (27 views)
Anyone in CO recommend a body guy? - mine sold out - linksvu 2008-11-02 21:53:17 (40 views) SVE Autbody in Broomfield is perhaps the best around. - brian@avalonmotorsports 2008-11-02 22:18:39 (16 views)
Took some night time macro shots.....yet more symptoms of chronic boredom. - turbos4audi 2008-11-02 21:37:50 (249 views) curious what kind of camera ? - marvgomez 2008-11-03 06:53:58 (22 views) It a Pentax Optio W60. It's just a "point and shoot" but it's a very nice one with an incredible - turbos4audi 2008-11-03 07:10:34 (94 views) Wow, excellent camera! - TabulaRasa 2008-11-03 19:49:29 (15 views) Thank you. I would recommend it to anyone. - turbos4audi 2008-11-04 09:24:27 (11 views) That's impressive...2nd pic, Conan O'brien? ;) - EDIGREG 2008-11-03 11:11:16 (18 views) HA! That's funny! Everyone at work calls me Conan. People always say stuff like, - turbos4audi 2008-11-03 13:54:02 (22 views) Last one??? - linksvu 2008-11-02 21:44:59 (30 views) V1 radar detector - EDIGREG 2008-11-02 21:53:13 (128 views) Anyone know if the remote display fits in the area where auto displays are on a 100? - linksvu 2008-11-04 08:03:23 (13 views) Is this what you are looking for? - turbos4audi 2008-11-04 08:43:51 (18 views) Not really... - linksvu 2008-11-04 08:58:18 (14 views) Yeah I am pretty sure that will not work well. This is the only way I have seen for our cars. - turbos4audi 2008-11-04 09:23:31 (14 views) Very nice - trust it? - linksvu 2008-11-02 21:54:44 (31 views) YES, it has paid for itself many times over. Strongly recommended. - turbos4audi 2008-11-02 22:25:19 (128 views) 2nd. - TighTT 2008-11-03 05:49:35 (28 views) 3rd. works great - Zwoobah 2008-11-03 08:57:08 (94 views) At least the V1 doesn't send mixed signals, right Chris? - UrS4boy 2008-11-03 11:53:43 (16 views) What does > the V1 or the hottie : p wat up Chris ? - //Swordfish 2008-11-03 10:11:13 (20 views) 4th. - MA_2.7t 2008-11-03 09:20:49 (21 views) 5th - QuattroPower88 2008-11-03 09:59:35 (21 views) Re: 6th I own 2 of them. Thinking of getting a third. - 94LSC 2008-11-03 15:07:33 (20 views) I don't have one. - EDIGREG 2008-11-02 22:14:07 (57 views) Yep, definitely bored.... - EDIGREG 2008-11-02 21:44:27 (54 views)
is weldon still on here - kmv3 2008-11-02 18:13:21 (26 views) not rly. need his email? - MiniMan 2008-11-02 18:22:02 (18 views) yea if i could it would save me alot of time - kmv3 2008-11-02 18:34:55 (16 views) ygm - MiniMan 2008-11-02 22:30:59 (11 views)
Me again, I Re-tested the spark with the coil tester, this time with a better Ground Wire. my last - sk88erguy 2008-11-02 18:01:57 (50 views) You should try adjusting the gap wider and wider to see at what gap each coil "fails". I suspect - UrS4boy 2008-11-02 20:05:09 (26 views) well Dave isnt 25 pretty damn big? I mean the spark was incredibly strong on #1 an the rest. - sk88erguy 2008-11-02 21:59:42 (21 views) I think you need to find out whether No. 1 coil is weaker than the others (or NOT) - UrS4boy 2008-11-03 07:30:42 (11 views) Dave it was hesitating like crazy this morning in 2nd up a hill. it would hesitate for 4-5 seconds - sk88erguy 2008-11-03 16:36:10 (12 views) Don't mess with the IM. - 20VT90q 2008-11-02 18:29:36 (32 views) Injectors cleaned, and i swapped #1 with #2. Compression is 150+PSI. i wont touch the IM, i just - sk88erguy 2008-11-02 18:43:18 (33 views)
"a4kquattro" Marc I was looking at your write up on motorgeek and was wondering... - Wicked Games 2008-11-02 18:00:45 (103 views) pretty standard stuff - a4kquattro 2008-11-02 19:24:10 (79 views) HD's or Sports? HDs are the taller ones meant for stock springs. Usually thought to be too tall for - UrS4boy 2008-11-03 07:33:02 (25 views) How do you like the H&R's mated with the HD's? - TighTT 2008-11-02 20:44:24 (21 views) nice actually - a4kquattro 2008-11-02 21:25:54 (49 views) oh I see the stance is awsome..thanks.. - Wicked Games 2008-11-02 19:46:21 (43 views) cool, thanks for the props! - a4kquattro 2008-11-03 06:41:41 (16 views)
Anyone in the Vancouver area have a crank bolt lock tool i can borrow? - cs_729 2008-11-02 16:51:54 (32 views) I have one, located in Surrey. - quattro20v 2008-11-03 07:06:41 (11 views) Didn't Alex do the timing belt/water pump/idler etc? - UrS4boy 2008-11-02 17:43:26 (14 views) You "could" try this.... - turbos4audi 2008-11-02 17:08:10 (43 views) Already tried it... haha it still didn't loosen it. I swear the bolt is welded on there. - cs_729 2008-11-02 17:29:24 (11 views) I have one. I'm in abbotsford. Let me know if you need it - quattro_rocks 2008-11-02 16:57:48 (17 views) I'll consider it. Being that my car is in shambles right now it's just a little bit of a chore to - cs_729 2008-11-02 17:00:39 (29 views)
4411 on a road trip. Seems this has happened to others before? - Dace Voit 2008-11-02 13:40:56 (52 views) isolate the cylinder, disconnect the injector harness ad see which one doesn't affect the idle - kinderutz 2008-11-02 17:21:18 (22 views) This will be my first test tomorrow. I am looking at injectors first, then ignition... - Dace Voit 2008-11-02 20:30:43 (15 views) 4411 = Fuel Injector for Cylinder 1, (N30) Open or short circuit. Why don't you think it's real? - UrS4boy 2008-11-02 14:19:39 (41 views) I have the tools to do the work to the injectors, and even a coil conversion. CPS job, no. Ive... - Dace Voit 2008-11-02 15:29:21 (26 views) Not that I don't think that it's real, it's just that one of the symptoms is sooo much like - Dace Voit 2008-11-02 15:25:34 (26 views) My bad CPS sensor popped the 4411 code, I wouldn't assume the code is correct where are you at? - Fastscirocco 2008-11-02 15:01:05 (17 views) Just saying don't necessarily ignore a code. It might be real. At least check the injector. - UrS4boy 2008-11-02 15:31:03 (14 views) True. Will do. That being said, if it is the injector, what is the upper horsepower level that the - Dace Voit 2008-11-02 15:48:53 (24 views) Not too much north of 280 hp. All PNs for RS2 conversion are in the FAQ. - UrS4boy 2008-11-02 16:05:34 (18 views) Cool. Thanks. I'm running an MTM 1+ chip with everything else stock. - Dace Voit 2008-11-02 16:37:40 (15 views) Good clean even-flowing injectors will be fine for that. - UrS4boy 2008-11-02 16:56:30 (11 views) Louisville, Ky. - Dace Voit 2008-11-02 15:26:21 (14 views) I also had a cracked spark plug, which was intermittent, running on 4 then 5 cylinders. Do you have - donalds6 2008-11-02 14:10:17 (30 views) Ripped Hose? Check the Michelin Man hose.. - donalds6 2008-11-02 13:52:09 (15 views) I've installed Samcos about a month ago. I also redid all of the associated vacuum lines. - Dace Voit 2008-11-02 13:56:39 (11 views) Did one possibly blow off? Most of the problems with no boost are leaks. - donalds6 2008-11-02 14:02:30 (11 views)
Just installed FMIC.......the boost is considerably louder than before - EB_1920 2008-11-02 12:06:59 (89 views) sounds like a scream or a whistle......gotta be a leak somewhere :( - EB_1920 2008-11-02 17:52:35 (18 views) I found that I got more INDUCTION sound with a FMIC than the stock IC. - UrS4boy 2008-11-02 12:20:41 (87 views) LOL. KATE underhood??? :) - SilberUrS6 2008-11-02 13:59:47 (22 views) That's why I was winking. - UrS4boy 2008-11-02 14:13:54 (17 views) Geez, Eric, I love the way your mind works!! - donalds6 2008-11-02 14:04:15 (17 views) [bows] Thank you, sir. - SilberUrS6 2008-11-02 15:06:33 (12 views) Dont im jealous of FMIC's. :-) - AUDIS6DOIT 2008-11-02 13:19:43 (30 views) And we're jealous of your bumper's and other kewl Euro market goodies.. ;-) - Herr Schröder 2008-11-02 13:28:23 (19 views) Ha ha ok fair is fair!! you always want what you havnt got!!cough cough!! - AUDIS6DOIT 2008-11-03 13:11:17 (8 views) BIG 2nd. - SilberUrS6 2008-11-02 14:00:37 (34 views)
Installed the D585 coils over the weekend and so far so good. Fixed a few minor problems as I - audidrvr 2008-11-02 11:54:44 (72 views) GM powah! - kinderutz 2008-11-02 13:02:50 (155 views) Since you had to put your own ends on the wires, why didn't you shorten them? - UrS4boy 2008-11-02 13:36:15 (28 views) don't know, i guess i wanted to keep them equal lenghts for equal resistance values - kinderutz 2008-11-02 17:23:52 (13 views) Sure but you still could do SHORTER equal lengths. (OR not, facory isn't equal on a 3B) - UrS4boy 2008-11-02 20:06:34 (10 views) Good job. Now get those mounting photos posted up for all to see. - UrS4boy 2008-11-02 12:21:33 (20 views) What were your issues before the install? - alpinab7 2008-11-02 12:03:49 (22 views) The car was just full of issues when i got it. I am slowly getting it dialed in. - audidrvr 2008-11-02 17:00:58 (12 views)
Brake confusion: Do 996 (and Boxster S) calipers fit on our cars with RS2 brackets? Apparently they - UrS4boy 2008-11-02 07:44:06 (89 views) Re: Brake confusion: Do 996 (and Boxster S) calipers fit on our cars with RS2 brackets? Apparently - 4x5x5 2008-11-03 05:23:54 (33 views) they do fit but there are slight alignment and width discrepancies... Need to add spacers - quattro.pilot 2008-11-02 09:01:32 (41 views) Rob: The caliper that I am talking about is the monobloc, not the ones you have. - UrS4boy 2008-11-02 09:29:59 (15 views) I had Front & Rear boxsterS calipers, & when I first got the S4 I used RS2 brackets + A8 - quattro.pilot 2008-11-02 09:48:54 (52 views) Okay. I did not know that. - UrS4boy 2008-11-02 10:12:02 (13 views) I think coupe fitment is similar. A_CQ had done the deed but for some reason I wanna say he - quattro.pilot 2008-11-02 10:19:20 (22 views) 22mm? Are you sure you don't mean 323x32mm? - TabulaRasa 2008-11-02 09:23:53 (15 views) i got 22mm on the brain b/c that's the width of the S4 rear discs I'm using on my 90 - quattro.pilot 2008-11-02 09:53:13 (51 views) yea, that's what I meant =P - quattro.pilot 2008-11-02 09:45:18 (11 views) If it's true that the RS2 brackets work then wouldn't it all be dependent on the hub? - turbos4audi 2008-11-02 08:55:26 (29 views) No idea. The DIY was for a CQ not even an S2. I am sure there is a reason why BIRA came up with - UrS4boy 2008-11-02 09:01:13 (34 views)
Pics of a few new mods...... - TighTT 2008-11-02 07:21:14 (416 views) In the words of Jeremy Clarkson: "That is filth!" - linksvu 2008-11-02 21:51:00 (17 views) Nice...you are on the ball!! - EDIGREG 2008-11-02 18:34:24 (21 views) Forgot this one as well..... - TighTT 2008-11-02 17:35:51 (166 views) Like the blk'd out audi ring boot badge......nice - AUDIS6DOIT 2008-11-04 03:23:08 (10 views) That rear lamp unit looks different to mine?? - AUDIS6DOIT 2008-11-04 03:21:45 (11 views) Nice. BTW, I don't think you'll ever get over the "winter beater" thing. - SilberUrS6 2008-11-02 14:02:44 (74 views) Barely scratched?? Eric, he is RS2'd already. Not like some people I know. - UrS4boy 2008-11-02 17:00:13 (58 views) LOL ! - //Swordfish 2008-11-02 18:56:00 (16 views) Winter beater talk doesnt bother me..... - TighTT 2008-11-02 15:42:16 (57 views) i like very much - Jersey90tq 2008-11-02 10:50:18 (25 views) =) - TighTT 2008-11-02 15:42:30 (18 views) sweet man. Your "winter beater" is nicer than my "race car" ;-) . good job, represent black! - quattro.pilot 2008-11-02 09:13:13 (28 views) =P - TighTT 2008-11-02 15:42:53 (21 views) Amazing! How many miles? - Wraythe 2008-11-02 07:53:25 (29 views) 170K-ish - TighTT 2008-11-02 15:43:09 (18 views) I love the inline HO coils. - popdemonic 2008-11-02 07:52:35 (30 views) Nice and clean setup...I love it. - TighTT 2008-11-02 15:43:45 (20 views) Any improvement after the HO coils was in? - popdemonic 2008-11-02 19:00:58 (18 views) Well...I had a bad OEM coil, so yes there was an improvement. =) - TighTT 2008-11-02 20:46:56 (25 views) Looks great. That grill picture is fantastic, everything is so clean. You should get some polished - turbos4audi 2008-11-02 07:37:13 (87 views) <whispers: you can get those bolts in anodized colours> <runs away> - UrS4boy 2008-11-02 07:48:57 (34 views) Yes I know. - turbos4audi 2008-11-02 09:32:56 (73 views) those fit? - Sloooo4esT 2008-11-02 12:31:38 (24 views) For the coil cover, yes. The cam cover has 2 different sizes IIRC. - turbos4audi 2008-11-02 12:50:06 (22 views) Yes. The two at the front (no. 15 inside) are longer than the others (16) - UrS4boy 2008-11-02 13:38:43 (64 views) Yes, that is why I knew. - UrS4boy 2008-11-02 09:45:51 (27 views) It impossible to tell when you are joking. ; ) - turbos4audi 2008-11-02 10:48:10 (24 views) Now that was pretty damn funny! - lloyd21 2008-11-02 09:09:04 (25 views) Extremely nice winter beater. (You won't want to drive it in the snow). One question: What hose are - UrS4boy 2008-11-02 07:27:18 (88 views) This thing is going to SLAY the snow this year hauling my a$$ up to VT, maine, and possibly Canada. - TighTT 2008-11-02 15:45:44 (50 views) I will be making the VT trek pretty soon myself and I can not WAIT! - turbos4audi 2008-11-02 16:11:53 (26 views) Woot!! Im heading to Okemo on the 15th...cant wait! - TighTT 2008-11-02 16:51:55 (17 views) Have seen the car in person, even drove it. Im still impressed, but the car - oliwer78 2008-11-02 08:57:34 (97 views) Ah but this car has the most soul and heritage of them all,and i think deep down he knows it!! :-) - AUDIS6DOIT 2008-11-02 13:24:50 (26 views) Heritage and a kick-arse motor...yes. - TighTT 2008-11-02 15:52:52 (127 views) LOL amazed you dont suck in neibourhood stray dogs with that devil snail!! :-) - AUDIS6DOIT 2008-11-04 03:31:40 (9 views) Good Lord... Man I wish I had a 1.8T, my 2.8 = FTL.. ;-) - Herr Schröder 2008-11-02 19:37:59 (17 views) Be happy you don't have another car to mod.You always need one runner to fetch parts for the other. - UrS4boy 2008-11-02 20:09:13 (17 views) So what you saying Dave is that the urs4 is not a beater but a parts runner!!im wounded!!! :-)..... - AUDIS6DOIT 2008-11-04 03:35:19 (7 views) True.... - TighTT 2008-11-02 20:53:14 (82 views) drool - ICE RCKT 2008-11-02 22:45:05 (15 views)
Has anyone run a wheel with a +40 offset or..... - Renaissance 2008-11-02 06:16:39 (30 views) depends on the wheel. 42 stock avus fit. - jjm's quattros 2008-11-02 07:09:09 (15 views) Stock 16" Avus are 7.5"J x ET37 and they weigh 18 lbs with a rubber valve stem. - UrS4boy 2008-11-02 07:20:53 (28 views) i stand corrected - not sure what I was thinking of... - jjm's quattros 2008-11-02 08:23:24 (17 views) Maybe the B5 S4 17" Avus? - UrS4boy 2008-11-02 08:31:05 (18 views) naa I know those are 45 - jjm's quattros 2008-11-02 10:43:15 (14 views) Then you were thinking of the answer to the Universal question. - UrS4boy 2008-11-02 11:22:44 (24 views)
BTDT Help wif DDM/Apex HID install?? (TabulaRasa/TighTT?) - quattro5.v.2 2008-11-02 06:14:25 (53 views) Give this a shot.... - TighTT 2008-11-02 07:16:01 (48 views) EXAAACTLTY. Works like a dream now. Even the bulb-check. Awesome! - quattro5.v.2 2008-11-02 07:54:41 (16 views) Yeah, polarity is flipped. - TabulaRasa 2008-11-02 09:24:18 (14 views) WOW. The Euro lens + HID is fantastic. And that's only with 35W lows... - quattro5.v.2 2008-11-02 15:01:25 (12 views)
Did some searching....is the consensus that an early A4 sport wheel will bolt up easily to... - islingtonaudi 2008-11-01 21:36:33 (46 views) If you have a 97 A6, it will just bolt on. No changes to the switches. Those were just for the UrS4 - UrS4boy 2008-11-01 23:12:12 (45 views) Best news I've had all week! Thanks. - islingtonaudi 2008-11-02 21:57:05 (8 views)
What is the black between the headlights and corner markers on this car? - turbos4audi 2008-11-01 20:36:56 (105 views) Owner replied to my question on his video page. It is tape. - turbos4audi 2008-11-02 07:39:13 (11 views) Stopped at 8 sec. Looked. Surprized myself = liked it (on a black car). Paint or tape. - UrS4boy 2008-11-01 23:01:25 (15 views)
Any of us in Rally of New York?? -> - oliwer78 2008-11-01 20:09:09 (150 views) Damn...sorry I missed it!! You should have text'd me!!! - TighTT 2008-11-02 07:16:46 (19 views) It was first time on these roads and it was - rallygarage 2008-11-02 18:05:51 (16 views) do not worry, many teams finished at first day. Not the best rally to start with. - oliwer78 2008-11-02 08:15:24 (30 views)
Dave, I have not yet tested spark with power supplies swapped, but to test ECU, cant i just... - sk88erguy 2008-11-01 20:06:45 (26 views) Just borrow an ECU and try it. - UrS4boy 2008-11-01 23:03:53 (13 views) Re: Just borrow an ECU and try it. - TabulaRasa 2008-11-02 05:39:02 (14 views) The question is whether the ECU is putting out the correct POS control voltage. 1.8t coils wouldn't - UrS4boy 2008-11-02 07:12:15 (12 views) oh i guess this wouldn't work because 2 cylinders would be going to 3 and vise versa. that could - sk88erguy 2008-11-01 20:33:54 (15 views) ?? if you swap both connectors on both POS the car should run/drive fine. - quattro5.v.2 2008-11-02 04:39:04 (18 views)
thinking to do bomb b4 it get goes south. does that guy still do the recharging? - greenaudis4 2008-11-01 17:51:41 (38 views) not worth recharging, it's the membrane that goes bad and leaks internally - kinderutz 2008-11-01 19:26:15 (40 views) respectfully completely disagree. seems proven leak is usually 'osmotic' over long time period. - quattro5.v.2 2008-11-02 04:35:07 (25 views) i have 3 recharged bombs, do you want to know which lights a brake light and has a hard pedal? - kinderutz 2008-11-02 06:32:35 (40 views) so recharge 'em again! ;^) - quattro5.v.2 2008-11-02 06:37:34 (15 views) Re: not worth recharging, it's the membrane that goes bad and leaks internally - audiPete 2008-11-02 04:17:27 (43 views) Re: not worth recharging, it's the membrane that goes bad and leaks internally - greenaudis4 2008-11-02 07:48:19 (27 views) IIRC he was looking to sell the recharging equipment - js0ne 2008-11-01 18:31:28 (26 views)
Any S-car folks in/near Toronto? - SilberUrS6 2008-11-01 16:42:18 (19 views) Mark S. from Audifans is there. - UrS4boy 2008-11-01 19:22:56 (11 views) near - Brdman* 2008-11-01 17:09:15 (32 views) Near enough to go there for me? - SilberUrS6 2008-11-01 19:34:19 (33 views)
How does my turbo compare to an RS2 turbo? - jeff4000quattro 2008-11-01 14:57:05 (126 views) Ok, I have an update on my turbo. So the turbine wheel isn't a KKK like I thought, on the rebuild - Jeff_92S4 2008-11-20 15:19:52 (0 views) Is it a T3/T4 hybrid? - 450exc115 2008-11-01 20:14:26 (35 views) The turbine section is KKK. Not sure of the exact specs. - jeff4000quattro 2008-11-01 23:58:41 (28 views) Is it a KKK or is the housing a KKK with a Garrett wheel inside? - 450exc115 2008-11-02 07:55:07 (23 views) It's a KKK turbine wheel in a KKK housing - jeff4000quattro 2008-11-03 10:11:34 (15 views) Probably a K26 turbine then which is bigger than the RS2 turbo from - 450exc115 2008-11-03 12:09:44 (15 views) Increased response for street driving = drive in 2nd or 3rd gear - UrS4boy 2008-11-01 15:12:33 (92 views) Yeah 2nd and 3rd are definitely where the power is. Will a FMIC increase response? - jeff4000quattro 2008-11-02 00:00:31 (20 views) Not really. An FMIC has more volume than stock so pushing a pressure wave throught it = longer. - UrS4boy 2008-11-02 07:29:52 (27 views) And break the tires loose on dry pavement in 3rd! - alpinab7 2008-11-01 21:01:39 (26 views)
Intake Pressure Sensor intermittent fault - SchwarzS6 2008-11-01 14:28:30 (23 views) You might have software that wants a 3.0 Bar MAP but you only have a 2.5 Bar. (See link inside) - UrS4boy 2008-11-01 19:08:33 (12 views)
does a 98 A4 sport steering wheel fit a 95.5 S6? anyone has part #'s or pix? - kinderutz 2008-11-01 11:26:31 (35 views) Yes - Hoog23 2008-11-01 17:11:49 (15 views) Here's my thoughts... - SilberUrS6 2008-11-01 11:33:24 (79 views) The answer is verry simple. - 20VT90q 2008-11-01 13:40:58 (64 views) I thought so. - SilberUrS6 2008-11-01 15:26:08 (29 views) Actually, early '98 wheels (on pre-98.5s) will work, as they're the same part... - SCarGo02 2008-11-01 16:31:42 (33 views) OK, smarty - how about this... - SilberUrS6 2008-11-01 16:41:23 (35 views) Just look at a '95 90 - the part number for 08/94 - 07/95 are the updated switches / covers. - SCarGo02 2008-11-01 19:49:30 (19 views) OK, then I was looking at the right pictures. - SilberUrS6 2008-11-01 19:55:26 (13 views) Well early, early '95s still used the '94 and prior airbag system... - SCarGo02 2008-11-01 19:58:19 (16 views) Dude: You have a shiny silver disc with that info in it. - UrS4boy 2008-11-01 17:22:26 (16 views) Indeed, She keeps it well-hidden, and if you don't already know... - SilberUrS6 2008-11-01 19:35:53 (17 views) i'm installing ETKA on another computer, i can get the #s. - Brdman* 2008-11-01 17:10:42 (15 views) sounds like a good wheel cover might be the answer then - kinderutz 2008-11-01 11:36:17 (20 views) Well, they can be recovered. STFA for the discussions. - SilberUrS6 2008-11-01 11:38:57 (37 views)
Odometer light out - not bulb - linksvu 2008-11-01 10:23:31 (30 views) My solution - linksvu 2008-11-01 12:38:20 (31 views) The contacts are just wide copper traces on the cluster board... - rmccomiskie 2008-11-01 18:56:17 (16 views) Already back together for the Mrs. - linksvu 2008-11-02 21:43:26 (10 views) Broken Printed Circuit Board trace? - UrS4boy 2008-11-01 10:29:58 (14 views) Re: Broken Printed Circuit Board trace? - linksvu 2008-11-01 10:42:43 (29 views) yes - Sloooo4esT 2008-11-01 12:42:14 (10 views) Yep. I have a light out on my 98 C4 Avant (like an S6 odo) so I am curious. - UrS4boy 2008-11-01 10:57:56 (12 views)
Need to replace my mid-muffler or even whole exhaust - 931fan 2008-11-01 08:45:18 (42 views) $150 + shipping(not mine) - kinderutz 2008-11-01 11:22:10 (47 views)
Question on instrument lighting... actually the outside temp display - Scott_Napier 2008-11-01 06:17:38 (61 views) Also here with lotsa pics... - rmccomiskie 2008-11-01 19:01:30 (45 views) Good one. Had to laugh at the teak "workbench" (BTDT) - UrS4boy 2008-11-01 19:12:03 (9 views) Guess you didn't find this Temperature Display Bulb Replacement Procedure - UrS4boy 2008-11-01 08:26:19 (33 views) Much appreciated... - Scott_Napier 2008-11-01 09:35:16 (13 views) Outside temp display uses soldered-in bulbs - UrScubed 2008-11-01 06:33:06 (19 views) Do you know the p/n or a source? Radio Shack? - Scott_Napier 2008-11-01 08:06:57 (13 views) Oh, and is there a cheaper source than FAP99's $1.48 each? - Scott_Napier 2008-11-01 06:19:10 (24 views) how about $1.08 at AutohausAZ - PN 893919040A - quattro5.v.2 2008-11-01 06:36:56 (19 views) Just ordered from AutohausAZ. 2W bulbs are perfect. After changing the bulbs, take some time - dwang 2008-11-01 14:18:41 (21 views) Radio Shack 272-1191, same price. - donalds6 2008-11-01 06:36:39 (15 views) Also 272-1092 - UrS4boy 2008-11-01 09:53:02 (57 views) Sorry, that,s what I meant!!! - donalds6 2008-11-02 05:51:58 (9 views) Who are YOU again? - UrS4boy 2008-11-02 07:22:41 (14 views)
The UrS Wheel Gallery is Online... - EDIGREG 2008-10-31 22:42:15 (249 views) Great idea - love it - linksvu 2008-11-02 22:05:01 (12 views) No. 27 - they are AVUS off of '02 S8 not S4 b6. And nice job man. - oliwer78 2008-11-01 21:19:36 (16 views) Fixed...thanks. - EDIGREG 2008-11-01 23:31:39 (12 views) This is a GREAT tool... THANKS!!! - Renaissance 2008-11-01 16:27:29 (17 views) Great work :) . Thanks. - MiniMan 2008-11-01 14:46:38 (14 views) Looks great!! Just an FYI: the ABT A16's are ball polished...not chrome at all. - TighTT 2008-11-01 06:39:03 (18 views) Yeah, I was just categorizing polished and chrome together... - EDIGREG 2008-11-01 11:35:42 (21 views) Noice. I'll post up OEM C5 2.7T wheels as soon as my snows go on. - quattro5.v.2 2008-11-01 05:54:07 (20 views) GREAT JOB. Simple a clean. I like that you can sort by the different columns. I can just sort by - turbos4audi 2008-11-01 05:12:14 (33 views) The ABT a24's are 18x8 and nice work. - audi/s/scott 2008-11-01 04:31:35 (23 views) Fixed...thanks. - EDIGREG 2008-11-01 11:35:03 (14 views)
Ive got a coolant leak! I need some help finding it, please - toast_S4 2008-10-31 21:08:13 (47 views) find and check heater control valve... - Flynt 2008-11-01 09:16:38 (23 views) I vote Heater Core. Especially with coolant vapour in the vents. - UrS4boy 2008-10-31 22:15:33 (16 views) sorry misread. I had my heater check valve leak and i couldnt see any coolant in the plenum area - sk88erguy 2008-10-31 21:40:48 (28 views)
Dave, question about how the Coils get power, and what would cause low power. - sk88erguy 2008-10-31 19:59:26 (31 views) Brainwave(??): Swap the two white coil power connector positions and see if the miss moves. - UrS4boy 2008-11-01 16:32:53 (15 views) Exactly, thats why i was asking about testing those wires. will do. - sk88erguy 2008-11-01 18:30:57 (8 views) re: works or doesn't... not quite. POS are transistors so a weak ECU sig could cause partial 'on' - quattro5.v.2 2008-11-01 05:51:31 (20 views) Not disputing your POS diagnosis but are you saying weak ECU signal or weak POS channel? - UrS4boy 2008-11-01 08:34:15 (36 views) right - wuz makin' 2 diff't comments - one answering his question, one reiterating to try the swap. - quattro5.v.2 2008-11-02 04:13:29 (7 views) Ya im using the spare POS channel now anyway, same spark. - sk88erguy 2008-11-01 12:34:01 (6 views) Can you borrow an ECU to test the spark with a different ECU (to eliminate yours as the problem)? - UrS4boy 2008-11-01 15:15:43 (9 views) after i flip the white connectors im going to get together with kelly and try his ECU - sk88erguy 2008-11-01 18:44:40 (13 views) yes, would litely miss at 3000 rpm initial boost, then at 5000 go like a banschee and smooth out - Sloooo4esT 2008-11-02 00:08:37 (7 views) You need to test the coils with a coil tester. It allows you to adjust the gap to see which coil is - UrS4boy 2008-10-31 20:35:28 (31 views) I ran his coils on for a week or so, and the symptoms were the same, idle mis, shift hesitation, wet - sk88erguy 2008-10-31 20:43:34 (24 views) does kelly have good pos's you can run? - Sloooo4esT 2008-11-01 12:53:44 (9 views) well i fliped mine so the miss would have moved and it didn't, has anyone had a coil fail but only - sk88erguy 2008-11-01 14:04:44 (11 views) Coils typically fail to deliver at higher RPM (and boost levels) whereas POSs fail noticeably at low - UrS4boy 2008-11-01 15:17:28 (6 views)
Bottom line diagnosis on my Stromung noise problem... - quattro5.v.2 2008-10-31 15:01:14 (220 views) I think it depends on each car and each exhaust but............... - WVUrS6 2008-11-01 06:38:25 (37 views) not surprising since there are stromung 'versions'. def if I altered the arm I think mine'd be OK. - quattro5.v.2 2008-11-02 04:16:41 (9 views) Thanks for tracking this down and posting the photos! - es-car-go 2008-11-01 02:00:38 (34 views) That guard was left off on my install... - rfeagleye 2008-10-31 16:25:34 (67 views) if'n you read fully, there are 2 contact points - one on that shaft guard and one back at the mount. - quattro5.v.2 2008-11-01 05:41:01 (16 views) I did read it... - rfeagleye 2008-11-02 15:40:05 (9 views) how does your mounting arm match up then? does it align with that bump stop? - quattro5.v.2 2008-11-03 05:17:43 (6 views)
Repost for the Search and FAQ reading impaired: AAN workshop Manual pdf - UrS4boy 2008-10-31 14:13:52 (95 views) Sure you can. - EDIGREG 2008-10-31 14:42:31 (129 views) SOL - UrS4boy 2008-10-31 15:07:56 (52 views)
Cam cover gasket procedure? - Wraythe 2008-10-31 10:52:06 (33 views) Rubber mallet method is not loosing cam cover :( - Wraythe 2008-10-31 12:04:11 (29 views) 4-foot pry bar should do the trick - js0ne 2008-10-31 12:39:41 (27 views) you sure all the bolts are out? including the ones under the coil cover? - Zwoobah 2008-10-31 12:07:13 (21 views) I'm positive all bolts have been removed - Wraythe 2008-10-31 12:48:10 (16 views) There are 2 under the coil cover that don't look like bolts. - quattro20v 2008-10-31 13:10:59 (85 views) DAM ninja bolts... - Wraythe 2008-10-31 13:40:55 (44 views) good thing about cast aluminium. pretty inelastic - aka it don't bend. I'm sure you're fine. - quattro5.v.2 2008-10-31 15:15:20 (23 views) Hey, we all started somewhere. That,s the pleasure of learning about these cars. - donalds6 2008-10-31 14:16:02 (23 views) Except at a "certain age", everything is brand new again because you have forgotten what you did - UrS4boy 2008-10-31 15:11:17 (22 views) So true.. So, who are you anyways? - donalds6 2008-10-31 17:19:00 (13 views) That diagram is in several posts related to cam covers that can be found through search. Also in FAQ - UrS4boy 2008-10-31 14:10:11 (15 views) I stole it from your photos... - quattro20v 2008-10-31 14:57:53 (12 views) I know. I have "stolen" a few from you too from time to time. - UrS4boy 2008-10-31 15:09:20 (12 views) 1. Remove cam cover. 2. Remove old gasket. 3. Clean surfaces. 4. Install new gasket with silicone - UrS4boy 2008-10-31 10:58:05 (39 views) Thank you. Do I need to remove the timing belt cover? - Wraythe 2008-10-31 11:02:25 (17 views) I think it helps to remove the plastic t-belt cover, but you will have to remove - quattro20v 2008-10-31 13:54:24 (25 views) It might help but its not 100% necessary (IIRC). - UrS4boy 2008-10-31 14:11:30 (12 views) No. (IIRC) - UrS4boy 2008-10-31 11:31:05 (16 views)
Replacing Caliper Rubber Seals (HELP THANKS) - eric7soccer 2008-10-31 10:43:31 (26 views) you need to turn the piston all the way out, and remove it. then you can remove the seal and - awdaudi 2008-10-31 10:49:32 (33 views) thanks so much :) - eric7soccer 2008-10-31 11:02:22 (13 views) Re: thanks so much :) - greenaudis4 2008-10-31 15:43:49 (13 views) yup... check autohausaz.com or your favorite worldpac outlet. might as well replace the guide pin - awdaudi 2008-10-31 17:56:36 (14 views) . - greenaudis4 2008-11-01 10:24:35 (5 views)
What are the torque specs for valve cover bolts... - Wraythe 2008-10-31 10:13:14 (30 views) Thank you for your help :) Now I know its called a cam cover... - Wraythe 2008-10-31 10:53:29 (12 views) foot, not inch - js0ne 2008-10-31 10:26:57 (12 views) Through the miracle of Search "torque cam cover" we get.... - UrS4boy 2008-10-31 10:26:19 (34 views) ...STFA, n00b! - SilberUrS6 2008-10-31 18:22:47 (13 views) 'miracle of Search'... aka this is why so few hits for 'UrS4boy' and "STFA n00b".. .;^) - quattro5.v.2 2008-10-31 15:07:51 (14 views) Revise your thinking? - UrS4boy 2008-10-31 15:14:47 (26 views) 'zactly previous thread to which I wuz ironically and humorously referring to... - quattro5.v.2 2008-10-31 15:33:23 (12 views) For bonus points, did you find that post on your own today? - UrS4boy 2008-10-31 16:46:02 (13 views) I did search! But not for torque cam cover. - Wraythe 2008-10-31 10:38:52 (11 views) 12 lbs IIRC - UR-maninblack 2008-10-31 10:22:44 (12 views)
Iskolnick: PLEASE email me. - Azeem 2008-10-31 07:59:16 (57 views) ygm - \|skolnick 2008-10-31 09:12:21 (12 views)
Bom Chicka Wawah ....might need to sell my s4 to get this fatty - //Swordfish 2008-10-31 05:50:50 (331 views) not brilliant black, what color? dolphin gery? - Sloooo4esT 2008-11-02 12:48:31 (8 views) Who's selling it? If you pass, I'm on it. - MN_owdeeboy 2008-10-31 19:11:50 (20 views) I should've said a fatty like this. That car is in Europe. - //Swordfish 2008-11-01 11:15:25 (15 views) I like the satellite dish on the roof! - 94LSC 2008-10-31 13:50:08 (18 views) What is that? - donalds6 2008-10-31 17:21:11 (18 views) The dish is right beyond the car... - SilberUrS6 2008-10-31 18:21:07 (15 views) that's deadly - quattro.pilot 2008-10-31 10:09:37 (21 views) <drool> - - GT Style - 2008-10-31 08:25:28 (22 views) HAWT!!! - ajrdsr 2008-10-31 06:18:08 (29 views)
Shop didn't find anything on my #1 cylinder issue, charged me nothing but i doubt my car will ever - sk88erguy 2008-10-30 21:12:38 (91 views) recap: you have swapped coils and MAF and no change? POSs? - Sloooo4esT 2008-10-30 22:31:26 (23 views) lol,I've just noticed you changed your login name. - popdemonic 2008-10-30 22:45:38 (18 views) i thought it was fitting. the cooling system can be pressurised to see if the HG is bad cant it? - Sloooo4esT 2008-10-30 22:51:09 (37 views) Ya swapped coils, POS, new plugs. my coolant hasnt moved 100th of a MM so with 150PSI compression - sk88erguy 2008-10-31 00:00:28 (42 views) I should be around all weekend (except tonight) Matt. Give me a call... - UR-maninblack 2008-10-31 10:06:44 (21 views)
Jimmy Pribble's post from the 80/90/Cab forum - SilberUrS6 2008-10-30 20:44:57 (113 views)
Happy Halloween! ;) - EDIGREG 2008-10-30 18:43:42 (230 views) I'm at the club with the hard rain night!!! - popdemonic 2008-10-31 10:07:13 (28 views) I'm gonna hang out tonight!! - popdemonic 2008-10-30 19:44:07 (18 views)
Ahh yep, this can cause a little boost problem. - NeversummerS4 2008-10-30 18:32:40 (247 views) How many miles were on original boost hose? - Wraythe 2008-10-30 22:42:29 (23 views) But im Rs2'd so I think the boost had alot to do with it+stiffer wastegate spring = rip - NeversummerS4 2008-10-30 23:21:45 (17 views) 152K - NeversummerS4 2008-10-30 23:19:59 (16 views) Thank you :) - Wraythe 2008-10-31 10:09:40 (12 views) duplicate message :( - Wraythe 2008-10-30 22:44:14 (19 views) I got same place.. - popdemonic 2008-10-30 20:25:51 (128 views) How do you like that? I like. - NeversummerS4 2008-10-30 21:34:37 (19 views) Here's I put them off when samco arrived.. - popdemonic 2008-10-31 02:50:27 (93 views) Pop what is that IC you had on before the new one arrived?? - AUDIS6DOIT 2008-10-31 10:42:19 (13 views) boost always feels stronger after it's been gone for a while. - quattro.pilot 2008-10-30 19:50:21 (21 views) :( not in my case, not yet - Sloooo4esT 2008-10-30 19:58:27 (21 views)