AudiWorld Forums: Original "S" Cars Discussion

AudiWorld Exclusive: Truth in 24 Documentary at AFI Fest

First Drive: The All New Audi S4

Exclusive Interview: Peter Schwarzenbauer, Member of the Board of Management of AUDI AG Marketing and Sales

Original 'S' Cars FAQ Digest

[Reader Tips] [Search Forums] [Post Picture] [Post New Thread]

Page: [<<<] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [>>>]
Total Threads: 27447, Total Pages: 549

turns out the PO replaced this hose connector with a regular half inch connector - 12vA90 2008-11-19 06:43:52 (57 views) good news, it's about $10 from the dealer - Zwoobah 2008-11-19 11:48:56 (6 views) Part number for the "T" found in 2 seconds through the miracle of [Search Forums] - UrS4boy 2008-11-19 07:19:41 (24 views)
Whats the trick on getting the heater core out of the blower motor? (whole assembly is out of car) - toast_S4 2008-11-18 22:35:10 (22 views) Thanks for the relpies...I ended up getting it open this morning at 3 am. In my tiredness, I mixed - toast_S4 2008-11-19 08:10:32 (23 views) Did you look in the FAQ? There are heater and fan procedures linked there. - UrS4boy 2008-11-19 06:21:43 (11 views) heater core & blower motor are 2 distinct and separate parts.. one cannot be in the other. So - quattro.pilot 2008-11-18 22:50:28 (28 views) Sorry, crappy wording. Im trying to get the heater core out of the heater box.... - toast_S4 2008-11-18 23:09:47 (26 views) you have to remove most of the servos too, as the flaps inside have retaining clips underneath - AndrewWK 2008-11-19 04:19:52 (22 views) Re: I've actually cut out the side of the box and removed the heater core..... - Avanthead 2008-11-19 05:49:35 (35 views) Boo - Turbo_Anarchy 2008-11-19 06:34:56 (12 views) Hack. - 4Driver4 2008-11-19 06:29:36 (12 views) Re: It works and It did not take me a full day to do it. - Avanthead 2008-11-21 13:25:28 (0 views)
i remembered to keep track of my mpg during my trip this past weekend and i got 24.30 mpg - SpeedyDTP247 CQ+UrS4 2008-11-18 20:58:58 (57 views) what size tires on them rs4 wheels? take that into account and your milage may be closer to 26mpg - Sloooo4esT 2008-11-18 21:49:27 (9 views) 215/45r17 - SpeedyDTP247 CQ+UrS4 2008-11-19 17:29:01 (6 views) well silly but subtract 1% of your calculation - Sloooo4esT 2008-11-19 17:48:50 (10 views) How long after the fuel level warning light came on? 17.69 US gal = 66.9 L. I always say that the - UrS4boy 2008-11-18 21:34:32 (51 views) my low fuel light came on at 390 miles - SpeedyDTP247 CQ+UrS4 2008-11-19 17:25:33 (3 views) Dave, i never let my light even come on. I put in 17.6 in and didn't see the light come on prior. - sk88erguy 2008-11-18 22:54:41 (27 views)
good machineist in north jersey? - eric7soccer 2008-11-18 19:41:54 (49 views) RPM did a nice job on my head, however... - TurboJew 2008-11-19 07:15:44 (31 views) Don't know if Jim still does this - 450exc115 2008-11-19 05:41:51 (31 views) While the head is off, spend the money on removing and building the bottom end too. - MiniMan 2008-11-18 22:59:55 (27 views) head is going into the shop next week - eric7soccer 2008-11-19 07:08:52 (26 views) Make sure you source the parts yourself - CarNut68 2008-11-19 09:18:52 (17 views) yeah im gonna run the parts my self i believe - eric7soccer 2008-11-19 10:16:14 (19 views) extrude honning: 5 or 6 Cylinder Aluminum Heads- $842.50 (boneheadperformance.com) - kinderutz 2008-11-19 12:47:53 (12 views) Maybe ask in the regional NY/NJ/CT forum? - dwang 2008-11-18 20:48:39 (11 views)
I need help finding the thread from a few months back about the UrS4 vs. M5 vs. 500E.. - //Swordfish 2008-11-18 19:30:22 (55 views) Phhft. 2 milliseconds. [Search Forums] on "500E" with photos. - UrS4boy 2008-11-18 21:29:38 (53 views) Hence your name " The Librarian"..got your emails boyz ...Thanks. - //Swordfish 2008-11-19 05:31:02 (12 views) I vote we change his name to Lycos - AndrewWK 2008-11-19 22:25:25 (21 views) YGM - vaughn 2008-11-18 19:36:40 (21 views)
Blackurs4's old S4 spotted on Canada's Worst Driver - - GT Style - 2008-11-18 18:10:14 (268 views) I own that car now, bought it for 2k and nothing really wrong with it. had a bad ground and works - vwaudidriver 2008-11-20 07:16:58 (16 views) Do you know what episode it was? - turbos4audi 2008-11-18 18:50:39 (18 views) Just looked it up. Season 4...episode 4 - QuattroPower88 2008-11-18 19:00:14 (17 views) Torrent link preez? - TabulaRasa 2008-11-18 19:01:09 (44 views) Please tell me that they at least did a wet burnout/donut with it. - UrS4boy 2008-11-18 18:13:45 (22 views) Nope. It hit a bump, shorted out battery & caught fire.... - - GT Style - 2008-11-18 18:26:24 (86 views)
Stromung exhausts still available? - CarNut68 2008-11-18 18:00:24 (33 views) ill send you "his" e-mail. - Julian_B 2008-11-18 18:08:47 (23 views) I am looking to buy one too. - mi87lano 2008-11-19 06:03:47 (10 views) I have a used one available... - 94LSC 2008-11-19 15:12:16 (20 views) How used are we talking? Do you have any pictures? - mi87lano 2008-11-20 02:54:46 (6 views) Like new. e-mail sent. - 94LSC 2008-11-20 07:13:29 (5 views)
anyone know this name? Peter Sinkevich. bought some 4000 H&R springs from him - Sloooo4esT 2008-11-18 17:06:30 (65 views) Maybe he died. - MiniMan 2008-11-18 17:51:47 (47 views) crossed my mind, maybe he got kidnapped by mexican gangsters from tijuana - Sloooo4esT 2008-11-18 17:59:35 (12 views) goes by Nick on AF and email is 180cali@gmail.com - Sloooo4esT 2008-11-18 17:29:36 (18 views)
94 S4 V8. 112k Km, UK. - turbos4audi 2008-11-18 15:54:32 (119 views) That one's been on offer for months now. Anyway to find out the build date? - UrS4boy 2008-11-18 16:35:28 (20 views) Pre-September '93 = Perfectly legal to import. - MiniMan 2008-11-18 18:01:54 (15 views) How to do you know this? "94" = to end of June 94. - UrS4boy 2008-11-18 18:14:50 (13 views) I STP'd. - MiniMan 2008-11-18 22:54:13 (22 views) Thankyou. I did not see that. - UrS4boy 2008-11-19 06:23:04 (10 views) NP, sir. - MiniMan 2008-11-19 13:11:43 (2 views) Is that just FYI or is that car pre SEP 93? - turbos4audi 2008-11-18 18:06:36 (12 views) Definitely pre-September 1993. - MiniMan 2008-11-18 22:52:37 (8 views)
any green audis with 17" rs4(b5) wheels? - greenaudis4 2008-11-18 15:36:35 (38 views) Did you look in the recent Wheel Gallery page? - UrS4boy 2008-11-18 16:33:04 (29 views) Re: Did you look in the recent Wheel Gallery page? - greenaudis4 2008-11-18 21:09:33 (22 views) Get out your crayons and colour this one green. - UrS4boy 2008-11-18 21:37:24 (81 views)
I get a wooshing/vibrating/grinding sound... - UrSoccer_mobile® 2008-11-18 15:15:30 (51 views) Is it an actual vibration or just a sound? any power loss? - 12vA90 2008-11-18 16:38:06 (15 views) No power loss at all. Seems to be coming from the front pass side.. - UrSoccer_mobile® 2008-11-18 19:13:28 (9 views)
head work (big turbo guys help) - eric7soccer 2008-11-18 13:37:24 (111 views) 4-500 I'd say P&P isn't as much of a requirement, 5-600, much more so. - nate @ 034MOTORSPORT 2008-11-18 20:29:32 (61 views) my question nate is... - eric7soccer 2008-11-19 05:12:50 (43 views) Nate, any chance you could convince Javad to fund testing just the 7A exhaust cam? - MiniMan 2008-11-18 23:03:10 (24 views) Did you see the guy on the S2 forum who claims he has 257crk hp just because he P&P'd his head - UrS4boy 2008-11-18 22:17:38 (38 views) Didn't see that one in particular. Did he have solid before and after numbers on the same dyno? - nate @ 034MOTORSPORT 2008-11-19 09:20:52 (34 views) YGM - UrS4boy 2008-11-19 21:20:10 (3 views) A maybe pigs WILL fly. - UrS4boy 2008-11-19 20:27:51 (11 views) I love you nate :)! It sounds like he dyno'd that car in Colorado, Janis had really good results - germantoy 2008-11-19 10:27:34 (30 views) Not too hard to believe. P&P would increase flow volume w/o an increase in boost - ThetaTau87 2008-11-19 07:27:04 (18 views) Sure but not 40 ish new hp. I'd give it 10 or even 20 but not 40. - UrS4boy 2008-11-19 20:30:05 (6 views) True, That's why I don't look at crank hp estimations, only whp - ThetaTau87 2008-11-20 06:51:00 (7 views) 7A exhaust cam w/ AAN intake. P&P the head. S2forums.com has good info. - Melinko bq 2008-11-18 18:33:25 (24 views) I rebuilt my head with ti retainers, uprated valve springs, courtesy 034. 7A exhaust cam, used. - MiniMan 2008-11-18 14:41:10 (78 views) What RPM do you plan to rev to? - ThetaTau87 2008-11-18 17:02:34 (30 views) The tune is going to cut off at 8000 RPM. I'd imagine a P&P would help build boost sooner too... - MiniMan 2008-11-18 17:43:00 (40 views) Pegged my tach twice already....P&P helped, but prolly won't do that again... - //Swordfish 2008-11-18 18:47:21 (35 views) pussy rev it to 9k :) - germantoy 2008-11-18 17:51:48 (16 views) yeah i know gotta do everything right, thanks for the info - eric7soccer 2008-11-18 15:13:09 (19 views) 400-600 whp eh? have you ever driven a car with that much power? - germantoy 2008-11-18 14:24:40 (35 views) Re: 400-600 whp eh? have you ever driven a car with that much power? - EricAl 2008-11-18 22:30:02 (29 views) yes, i have a e30 m3 with e36 euro motor turbo - eric7soccer 2008-11-18 14:31:01 (35 views) then you have not driven a car with 400+awhp completely different animal - germantoy 2008-11-18 16:33:32 (76 views) haha yeah thats... - eric7soccer 2008-11-18 16:38:24 (84 views) hahaha thats funny my neighbor explains his scharged e46 m the exact same way - germantoy 2008-11-18 17:49:34 (61 views) ^ troof. - MiniMan 2008-11-18 17:59:17 (17 views) how did you diagnosed the burnt valve? leakdown test? visual? any pix? - kinderutz 2008-11-18 14:23:01 (27 views) Re: how did you diagnosed the burnt valve? leakdown test? visual? any pix? - eric7soccer 2008-11-18 14:31:39 (65 views)
clutch pedal finally broke.... - urs6ville 2008-11-18 13:12:48 (78 views) Im just waiting for mine. Its gotta go soon as the clutch is ridiculously stiff - 12vA90 2008-11-18 16:41:54 (14 views) Congratulations - that's a lucky break! - Fastscirocco 2008-11-18 13:34:04 (23 views) yes, I was actually "happy" it happened. At least as happy as can be stuck on the side of the road. - urs6ville 2008-11-18 13:53:54 (18 views)
Annoying ass coolant leak, veteran opinions please - germantoy 2008-11-18 10:56:26 (111 views) OK NOW IM PISSED I replaced the valve STILL NO FiNG HEAT!!!!!!!!!!!!!!! - germantoy 2008-11-18 21:01:33 (33 views) ITS THE HEATER CORE :( ANYONE HAVE ANY ADVICE TO R&R? - germantoy 2008-11-19 12:53:41 (9 views) Search for bar1's writeup -- you can do it without removing the center console. - kday 2008-11-19 13:36:25 (9 views) When I had no heat... - silbergti 2008-11-19 08:16:26 (16 views) HAROLD which one is temp control cause i think they are stuck as i didnt see the levers move. !!!!!! - germantoy 2008-11-19 09:57:16 (6 views) Going from memory... - silbergti 2008-11-19 21:51:31 (7 views) What does channel 51 on cc head read at operating temp? - AndrewWK 2008-11-19 04:07:59 (15 views) Dealing with a similar issues at the moment... - Emerald-UrS4 2008-11-18 13:51:47 (32 views) I assume you have access to a pressure tester.... - Julian_B 2008-11-18 11:33:07 (42 views) Yup two days before I took the car to the Glen. Be care with the pressure tester... - 4Driver4 2008-11-18 15:50:40 (28 views) my valve was the source of a leak - couldn't see it but with your hand on it it - jjm's quattros 2008-11-18 11:12:26 (41 views) +1 for the heater valve. Pretty easy fix once you remove the wiper arm & plastic stuff. - TabulaRasa 2008-11-18 11:20:10 (22 views) wiper arm? what valve are you talking about tab? - germantoy 2008-11-18 11:43:52 (22 views) You know, the vaccum acuated valve in the cowl area that regulates coolant flow to the heater core? - TabulaRasa 2008-11-18 12:26:11 (26 views) Mine leaked as well, but no need to remove anything but the plenum cover. - sk88erguy 2008-11-18 14:28:36 (17 views) hope this pic works..... - Julian_B 2008-11-18 11:49:09 (128 views) Can we get documented part numbers for #17 and #13 - 450exc115 2008-11-19 05:47:23 (9 views) Same issue here, little bastage took me forever to figure out the leak was there. - Herr Schröder 2008-11-18 11:54:18 (21 views) ya im pretty sure its coming from around number 17, that would probably explain why my heat sucks?? - germantoy 2008-11-18 11:53:33 (28 views) My heat was lukewarm until I replaced the heater core... - kday 2008-11-18 11:55:29 (53 views) nice thanks k day - germantoy 2008-11-18 13:15:41 (15 views)
Skolnick will be crying over this... - TurboJew 2008-11-18 10:33:30 (131 views) BWHAHAHAHA!!!!!! - BakerCoupe 2008-11-19 08:53:17 (3 views) Better have some TP ready for his pops. - MiniMan 2008-11-18 14:42:49 (7 views)
Holy Schnikey ! Snow the size of corn flakes falling here....... - //Swordfish 2008-11-18 10:27:33 (89 views) sig pic looks nice. lake Michigan is cold so all we getting is corn snow and ice - Sloooo4esT 2008-11-18 16:48:42 (18 views) Thanks ! Man I learned my lesson last year when my 18's stayed on 1 day too.. - //Swordfish 2008-11-18 17:20:10 (14 views) 76 here today, doesn't feel like November - gietl 2008-11-18 12:04:42 (20 views) 2nd this stinks, bring on the snow man!! - Herr Schröder 2008-11-18 12:13:34 (20 views) Jiminy Peak in Mass is about 25 mins from me and they open this weekend.. - //Swordfish 2008-11-18 15:15:40 (20 views) I'm supposed to take some buddies up from TX next weekend and Keystone CO.. - Herr Schröder 2008-11-18 20:50:53 (13 views) I was skiing two weeks ago, now I am worried about this weekend - gietl 2008-11-18 14:54:22 (14 views) Big 2nd. I guess that's what the bar is for though.. - Herr Schröder 2008-11-18 20:52:24 (4 views) This does not stink. Loving this weather and the fact I can still run summer tires. - DOC 2008-11-18 14:51:09 (19 views) Not loving the 3D's on ice on the B5, slid off the road twice. Going back to Blizzak's.. - Herr Schröder 2008-11-18 20:36:13 (12 views) Eh, it made for a nice drive from Greeley (work) down to Longmont and back this afternoon! - SCarGo02 2008-11-18 13:53:30 (14 views) Lucky...Its just freezing here...I wish there was snow with it - QuattroPower88 2008-11-18 10:41:31 (19 views) I love those days. - turbos4audi 2008-11-18 10:39:13 (139 views) What are those 3 rectangular panels on the roof? - TabulaRasa 2008-11-18 19:00:36 (14 views) Solar panels for hot water. - turbos4audi 2008-11-18 19:25:53 (14 views) Is it effective in winter? Did you build it yourself or was it a commercial kit of some sort? - TabulaRasa 2008-11-18 22:00:49 (6 views) It's very effective in the winter. The front of the house faces south so when the sun sits lower on - turbos4audi 2008-11-18 22:42:55 (11 views) Hey guys, I could show you snow, but I won,t go there. Last year broke new records - donalds6 2008-11-18 11:55:47 (36 views)
Has anyone ever seen this 6-spoke wheel?... - rmccomiskie 2008-11-18 09:05:55 (215 views) I have a set of the 15's in my garage with brand new Avid H4S if anyone is interested. PacNW - BakerCoupe 2008-11-19 08:42:37 (8 views) It's the standard urS4 wheel. Don't put too much stock in Audi parts listings. - 4Driver4 2008-11-18 15:51:49 (16 views) Never seen a 16" version, the 15x7.5 is the downgrade all-season/snow wheel... - SCarGo02 2008-11-18 09:08:09 (158 views) I am trying to get rid of a set of those with continental tires on them. Couldnt even give them away - audidrvr 2008-11-18 15:35:41 (20 views) Took me two years. Similar: rims and tires. Started at $400 ended up at $180 to a EuroVan owner. - UrS4boy 2008-11-18 22:32:05 (10 views) Unfortunately, they do not fit over upgraded brakes, even "medium greys". - UrS4boy 2008-11-18 09:41:04 (28 views) Not a problem for me! ;o) - SCarGo02 2008-11-18 13:44:01 (15 views) But they will fit on the Westy I am restoring, with a little CNC work that is. =) - Turbo_Anarchy 2008-11-18 10:02:21 (34 views) Yeh. The hub opening is too small for a Westy. I saw one with Merc wheels on Sat. - UrS4boy 2008-11-18 10:35:05 (21 views) Holy cow...if you get that Parking Block any further up Arse end you're going to loose your exhaust. - 02ALMSTT 2008-11-18 09:32:53 (30 views) Actually I can back the tires right up to it and nothing will hit...but thanks for playing! ;o) - SCarGo02 2008-11-18 13:46:38 (21 views) Visit the wheel page developed a week or so ago. The 15" six spoke = Speedline winter package wheel - UrS4boy 2008-11-18 09:07:39 (44 views) A set of 4 of this would be nice... - rmccomiskie 2008-11-18 14:30:00 (29 views) My Parts List shows both 15x7.5" and 16x8" versions of this wheel... - rmccomiskie 2008-11-18 14:11:13 (16 views)
Anyone on here use/d an adjustable cam gear? - habe Ich gesagt 2008-11-18 07:42:02 (28 views) Since the exhaust cam has the CPS ring on it, it would be very difficult to adjust the cam but keep - UrS4boy 2008-11-18 08:00:39 (36 views) Dahlback racing has the cps sensor attachment - habe Ich gesagt 2008-11-18 08:15:04 (32 views)
what pistons and rods are you guys using when you rebuild... - crazyurs6 2008-11-18 06:37:22 (64 views) We've run Scat rods to over 700whp and 9500 RPM thus far. No failures to date. - nate @ 034MOTORSPORT 2008-11-18 11:09:27 (18 views) so whats the best place to get factory rods and pistons..?bearings..? - crazyurs6 2008-11-18 07:38:13 (31 views) Don't bother with factory rods. If your rebuilding nows the time to put something stronger in. - nate @ 034MOTORSPORT 2008-11-18 09:28:55 (23 views) Factory pistons and Pauter rods here, but what is your goal? - Herr Schröder 2008-11-18 07:14:17 (71 views) 2nd. I reused my stock pistons with Eagle rods and RS2 bearings. - MiniMan 2008-11-18 07:49:39 (25 views) I thought your engine was "built" when you bought it. (?) - UrS4boy 2008-11-18 08:02:01 (21 views) Negative. Never opened and had a blow head gasket when I bought it. - MiniMan 2008-11-18 10:09:14 (18 views) Minus to install the cams, that is. - MiniMan 2008-11-18 13:33:48 (8 views) CARRILLO RODS... - avantista 2008-11-18 07:04:51 (64 views) autoverde aka the best rods you can buy. Stock pistons are just fine :) - germantoy 2008-11-18 10:41:40 (13 views)
Can I run RS2 software with GT turbo? - popdemonic 2008-11-18 05:35:48 (44 views) Yes you can, but you'll run slower than RS2 software with RS2 turbo. - MiniMan 2008-11-18 07:48:04 (18 views) Thanks Corey;-) So I'd stick with RS2 turbo. - popdemonic 2008-11-18 09:22:23 (12 views) Why not just use the 034 chip set for the GT2871? - ThetaTau87 2008-11-18 06:12:13 (37 views) currently,I have MRC stage 2 ... - popdemonic 2008-11-18 06:35:43 (35 views) MRC2 SW is perfect for you since you have an Autotragic box. Still should - //Swordfish 2008-11-18 08:02:34 (34 views) the point is I also need brand new turbo.. - popdemonic 2008-11-18 10:03:06 (15 views)
Got my car up and running now, but my tach decided to stop working now - cs_729 2008-11-17 23:16:10 (20 views)
I had mixed coolant. Gunk build-up. Can I used CLR in the system to clean it out? - toast_S4 2008-11-17 19:48:12 (32 views) my system is all corroded and has crap all in it. I just figured CLR would clean it out. - toast_S4 2008-11-18 09:41:26 (12 views) Link to a G11 and G12 discussion with a link to a flushing procedure. - UrS4boy 2008-11-17 21:20:07 (39 views) From flushing my system like this, 2 times wasn't enough to remove old coolant, id do this until the - sk88erguy 2008-11-17 22:48:18 (47 views) don't do that. - quattro.pilot 2008-11-17 21:15:38 (23 views) R u serious??? - Julian_B 2008-11-17 20:43:28 (23 views) Others have suggested this. I wouldn't do it, nor need to, but he didn't just make it up :} - sk88erguy 2008-11-17 22:46:46 (42 views)
Is the Servotronic module the same for S6 & A6?... - rmccomiskie 2008-11-17 19:15:17 (19 views) According to my good friend Kate, she says that 441 422 065 AN, the steering gear (rack) is the - UrS4boy 2008-11-17 21:12:40 (32 views) BTW: Where can I get KATE? - rmccomiskie 2008-11-18 05:36:22 (7 views) Russian internet dating services? - UrS4boy 2008-11-18 08:03:31 (18 views) Ah! Copyright respected I'm sure. - rmccomiskie 2008-11-18 09:07:30 (9 views) Fershure - UrS4boy 2008-11-18 09:08:31 (7 views) Hmm. If it's all the same, the difference in feel must be suspension, wheels and tires... - rmccomiskie 2008-11-18 05:34:48 (15 views) I read somewhere that its different but who knows...check part numbers - J@RO 2008-11-17 19:44:24 (13 views)
1 used Bolero wheel in ebay...good spare for those who have them. - turbos4audi 2008-11-17 17:11:45 (61 views) OR 4 new for $800. - turbos4audi 2008-11-17 17:32:08 (92 views) Also, note the difference in offset, European is 40 and here is 35 mm. - quattro20v 2008-11-17 18:51:31 (11 views) They have been that price for years. I figured they would be sold out by now. - quattro20v 2008-11-17 18:49:45 (8 views) Wow, I had no idea they were that easily obtainable... bad news for my bank account - 12vA90 2008-11-17 17:37:44 (13 views)
Does anyone have a list of the crush washers/seals needed for a P/S pump change? - ROCCO_16V 2008-11-17 15:42:29 (15 views) parts list inside - quattro20v 2008-11-17 17:01:19 (28 views) Thank you, sir! - ROCCO_16V 2008-11-17 17:52:33 (8 views) anytime! - quattro20v 2008-11-17 18:51:51 (5 views)
Current cheapest place to buy a MFTS? - Joey T 2008-11-17 15:18:36 (66 views) For the record: $100 special order @ SJM - toast_S4 2008-11-17 19:52:21 (24 views) Do you have an account at Northside? If not, get yourself set up. - 4Driver4 2008-11-17 17:13:00 (49 views) Who? Where? What? - Joey T 2008-11-18 07:18:10 (8 views) $32 or $42 the extra $10 is worth not getting the meyle part. - ORFSADOY 2008-11-17 15:45:12 (64 views)
Does anyone know the dimensions of the front strut housings? Want to order double adjustables. - alpinab7 2008-11-17 14:00:14 (13 views) Or can anyone measure their koni insert if they have one out?????? - alpinab7 2008-11-17 14:28:22 (9 views)
nice scam.....i guess it was too good to be true - kinderutz 2008-11-17 13:58:25 (174 views) I contacted that person about the same exact car/pictures over a year ago. Scam forsure. To bad. - NeversummerS4 2008-11-17 15:14:17 (20 views) flagged it - kinderutz 2008-11-17 16:38:37 (14 views)
Who is using the 06B905115R (1.8T) coils in their AAN??? - jkid 2008-11-17 13:40:32 (52 views) Just for safety measures, I run an aluminum strip on the top of my coil packs. - donalds6 2008-11-18 05:02:30 (28 views) I splurged on the vented cover with my Apikol kit - ICE RCKT 2008-11-19 15:06:19 (3 views) I have been running without anything since Sept. 2005. Coil packs snap on hard if they are trimmed - UrS4boy 2008-11-18 09:27:12 (14 views) It is true that the coil packs, snap in hard, but it was just a way of making sure that they would - donalds6 2008-11-18 10:20:23 (12 views) I have a set of four 058 905 105's from an AEB engine if anyone needs them. - 4Driver4 2008-11-17 17:14:59 (19 views) Are those the bolt-in style? If so, they do not work with the 1.8t coil pack conversion harness. - UrS4boy 2008-11-17 17:19:26 (14 views) Yup. Bolt in. - 4Driver4 2008-11-17 17:47:34 (11 views) Just ordered the 034 harness and "S" coil packs today - CarNut68 2008-11-17 15:27:15 (38 views) even better, as the S's don't need trimming - Tornado //S6 2008-11-17 18:52:09 (12 views) Were those 077 905 115S? - CarNut68 2008-11-18 11:54:03 (11 views) they are indeed - Tornado //S6 2008-11-18 15:45:08 (7 views) I would have suggested Apikol with pre-trimmed coils as part of their kit. - UrS4boy 2008-11-17 17:20:21 (31 views) Ugh...wish I knew that earlier. Guess I should have asked. - CarNut68 2008-11-17 18:24:46 (9 views) Remove a rubber sealing ring and see if you if you can get the coil pack to snap onto the spark - UrS4boy 2008-11-17 14:52:29 (75 views) Re: Did you trim the plastic? I just trimmed the rubber. Maybe that's it. - jkid 2008-11-17 15:03:48 (21 views) I trimmed part of the little rectangular "key" with a Dremel. An Xacto model saw would work too. - UrS4boy 2008-11-17 15:19:16 (12 views) Perfect. Thanks. Much respect to you for pioneering this mod. - jkid 2008-11-17 15:28:48 (9 views) ;>) - UrS4boy 2008-11-17 17:21:02 (8 views) when I got the kit (coils and harness) from 034 I didn't trim anything as they were already trimmed - urs6ville 2008-11-17 14:26:30 (25 views) 034 is no longer selling the trimmed coils so you must trim them yourself. - jkid 2008-11-17 15:17:36 (11 views) Apikol kits come with trimmed coil packs. - UrS4boy 2008-11-17 15:20:03 (15 views)
ABS Defeat Switch? The writeup from scars says to use the fog lamp switch but put the - audidrvr 2008-11-17 12:38:45 (42 views) Because the ABS switch has momentary contacts? - Berserker 2008-11-17 13:09:49 (27 views) So does that just mean it will get reset when you turn the car off and back on? - audidrvr 2008-11-17 13:30:14 (22 views) No. - Berserker 2008-11-17 13:53:05 (32 views) Got it. Thanks! - audidrvr 2008-11-17 13:58:50 (7 views) I have an ABS switch out of an Audi 200, but it's not wired up. - TabulaRasa 2008-11-17 12:53:56 (24 views) Can i have it for $1 - audidrvr 2008-11-17 12:59:46 (9 views) No, the switch is already in my car, it helps make that area look a little less blank. - TabulaRasa 2008-11-17 13:23:40 (19 views)
Hello! New Here but not to AW or Audis/VAG cars in general, looking to buy a UrS4... - Justin517 2008-11-17 12:24:14 (148 views) Whatever you decide to do- shop well. Bring someone that knows what the - //Swordfish 2008-11-18 05:19:33 (40 views) "titanium shit houses".............haha yea they are pretty tough - QuattroCakes 2008-11-18 07:32:53 (12 views) Good advice, thanks! I'm leaning more towards Scotts A4 right now but there are a few... - Justin517 2008-11-18 05:42:32 (26 views) If I were you I would buy JoeyT's car - QuattroCakes 2008-11-17 19:24:43 (42 views) Email me. - Joey T 2008-11-17 16:09:20 (52 views) I Think I might have already... - Justin517 2008-11-17 17:27:47 (35 views) Uh oh...another B5 A4'er goin to the dark side!! =P - TighTT 2008-11-17 14:55:22 (26 views) LOL! mebe... I'm pretty interested in Scotts '97... - Justin517 2008-11-17 16:57:45 (37 views) overpriced in my opinion - kinderutz 2008-11-17 14:24:17 (21 views) OMGHAI2U! - TurboJew 2008-11-17 13:44:38 (25 views) That car has been for sale for a while now, if its the one im thinking of @ CMC in coventry - Julian_B 2008-11-17 13:31:40 (25 views) Heres my post a while ago... - QuattroPower88 2008-11-17 13:41:12 (90 views) Rust?!? SKIP! - TurboJew 2008-11-17 13:57:22 (23 views) Kinda what i was thinking. Unless I can get it for rly cheap. - Justin517 2008-11-17 13:59:24 (18 views) You're too late, if thats the car it's been sold for months. Brian's sales guy bought it. - audi/s/scott 2008-11-17 15:08:19 (25 views) Ah, OK. Well it looks like I'm going to have to test drive your car. the MKII is selling this week - Justin517 2008-11-17 16:53:46 (15 views) That's too much for the miles unless the car is spotless and has lot of mods that you want - ThetaTau87 2008-11-17 13:00:44 (54 views) Not sure if its "spotless" but looks clean, it has no mods (which I kinda like)... - Justin517 2008-11-17 13:08:43 (42 views) It actually has a Stromung and a Chip if i remember correctly - QuattroPower88 2008-11-17 14:18:31 (19 views) no mods at 176k usually means overdue for suspension replacement. check carefully. - Zwoobah 2008-11-17 13:39:10 (21 views) Hey ass hat you're suppose to buy my A4 ;-) - audi/s/scott 2008-11-17 12:42:49 (38 views) DAMNIT! YOU ARE ON HERE MORE THAN I THOUGHT!!!! crap... - Justin517 2008-11-17 12:57:29 (54 views) There is a very nicely modded '91 200 20v with 180k for sale in MD - jkid 2008-11-17 17:34:00 (21 views) Hmmmm... I might be interested, but I think Id rather go newer than older. plus... - Justin517 2008-11-17 17:39:47 (24 views) Werd, looks and not having to deal with a distributor cap are worth it alone. - TabulaRasa 2008-11-18 09:10:25 (7 views) Heh, busted! Tough one, A4 is better on gas and more nimble, S4 is faster and more comfortable. - audi/s/scott 2008-11-17 13:26:31 (52 views) Just went through the same decision process - jkid 2008-11-17 17:49:53 (29 views) yeah, I know... vry tough... - Justin517 2008-11-17 13:54:55 (20 views) lol, that didn't take long. - ThetaTau87 2008-11-17 12:56:04 (20 views) Welcome to the C4S4 board. Where ru located ? Its a small world here - //Swordfish 2008-11-17 12:28:21 (47 views) Well, I'm in CT. I dont know if I wnat to post the details because I dont want... - Justin517 2008-11-17 12:53:25 (63 views) Haha no one will beat you to the punch... - QuattroPower88 2008-11-17 13:36:49 (53 views) LOL! CMC? I was ging to post it after "but I guess its not 'vortex" but forgot... - Justin517 2008-11-17 13:56:07 (47 views)
Quattro5: I have questions for you reguarding your HID's - Biscuit141 2008-11-17 11:15:38 (41 views) the ballast fit perfectly right underneath the lights - Zwoobah 2008-11-17 12:02:31 (29 views) I used to have them there, but noticed they were getting wet... - EDIGREG 2008-11-17 12:11:11 (27 views) I was able to mount both "normal" sized ballasts on the fender side of each headlight... - EDIGREG 2008-11-17 11:41:56 (28 views) I can answer for you. 1) The euro lens has less fluting, which results in less - quattro20v 2008-11-17 11:34:27 (39 views) How do you relay the ballasts? I suck at electrical stuff. - TabulaRasa 2008-11-17 11:38:33 (14 views) quick sketch of relay wiring diagram - quattro20v 2008-11-17 11:56:55 (62 views) Here's a picture (Single 40A relay)... - EDIGREG 2008-11-17 12:04:55 (57 views) Quattro & EDIGREG: Did you both buy & use the wireing harness? I have an aftermarket stereo - Biscuit141 2008-11-17 13:04:13 (22 views) No, I plan to make my own. No, it will not shut down the stereo as the current draw - quattro20v 2008-11-17 14:28:09 (19 views) Can you make your own cheaper than you can buy the whole kit? Also, - Biscuit141 2008-11-17 17:37:51 (12 views) Mine only shuts the stereo down when I turn on my fogs. - TabulaRasa 2008-11-17 15:09:49 (20 views) Order the regular sized kit...here's why: - TabulaRasa 2008-11-17 11:32:42 (35 views)
Anyone here run a 205/55/16 on the OEM UrS4 5 spoke rim? I'm wondering - Carmine_S4 2008-11-17 09:12:25 (49 views) this is what was on my car when I bought it. I replaced with 225/50 when those wore out as - ICE RCKT 2008-11-17 22:08:51 (12 views) Thanks guys! - Carmine_S4 2008-11-17 12:06:23 (6 views) Should be OK, I run 205-55-16 winters on the Avus 16x7.5 rims. - quattro20v 2008-11-17 11:37:03 (19 views) That seems kinda skinny for an 8" wide wheel - plus you don't want to strech a snow tire.... - SCarGo02 2008-11-17 11:13:34 (24 views) Re: That seems kinda skinny for an 8" wide wheel - plus you don't want to strech a snow tire.... - TabulaRasa 2008-11-17 11:27:46 (34 views) you can stretch a 205 to fit a 9" wheel without much trouble - Zwoobah 2008-11-17 11:30:33 (27 views)
Time required to replace coolant after run pump? - Scott_Napier 2008-11-17 08:15:15 (35 views) This might help. (Found via [Search Forum] on "coolant pump") - UrS4boy 2008-11-17 09:59:11 (19 views) I have the pump, so I will knock this out soon... thanks! - Scott_Napier 2008-11-17 11:13:42 (5 views) In the meantime, replace the pump with a 90 deg plastic elbow from Home Depot. - UrS4boy 2008-11-17 08:19:58 (15 views) 10 mins at the most lol - Julian_B 2008-11-17 08:16:30 (12 views)
REMINDER: EPL's 2nd Annual Dyno Day/GTG - Saturday, Dec. 6th - DAP@EPL 2008-11-17 07:03:08 (67 views) Whatup Dave ! Yup..I'll be there, but just for the grub and good times : p - //Swordfish 2008-11-17 15:21:42 (7 views) Anyone going? - Hoog23 2008-11-17 12:30:01 (15 views) I'll be there - Julian_B 2008-11-17 12:55:31 (9 views) I'll try to stop by. Let me know what time you're thinking of going.. - Hoog23 2008-11-19 05:52:20 (0 views)
turbo surge??? weird - eric7soccer 2008-11-16 20:32:28 (77 views) shut the waste gate completely? - eric7soccer 2008-11-17 08:51:57 (21 views) Generally the N75 works at first, then degrades as it heats up. - TabulaRasa 2008-11-17 10:21:51 (15 views) Tell me about it,found that out when i fitted my Dhalback induction kit,the n75valve hates the heat! - AUDIS6DOIT 2008-11-17 13:46:13 (13 views) 2.7T guys are starting to relocate their N75's to the cowl area... - TabulaRasa 2008-11-17 14:28:46 (10 views) is there any defect with moving it away futher than what it was? - eric7soccer 2008-11-17 17:26:48 (8 views) Is that right! well it makes sense.The further away from the heat the better..:o) - AUDIS6DOIT 2008-11-17 15:05:29 (8 views) would the n75H be able to work better with it or is it pretty much the same as stock. - eric7soccer 2008-11-17 12:01:00 (10 views) N75H = stock. - TabulaRasa 2008-11-17 12:18:29 (7 views) you got a boost gauge? - audidrvr 2008-11-17 08:14:23 (11 views) no boost gauge - eric7soccer 2008-11-17 08:50:13 (8 views) Eryk read Mr. Skolnick's research.... - J@RO 2008-11-16 21:55:15 (44 views) November-Seventy-Five-Hotel. - TabulaRasa 2008-11-16 20:40:22 (19 views) im not catching on?? ;/ - eric7soccer 2008-11-16 20:48:42 (20 views) 034 906 283 H - TXurS6 2008-11-16 21:03:04 (36 views) Re: 034 906 283 H - eric7soccer 2008-11-16 21:08:57 (44 views) Search on N75 - TXurS6 2008-11-16 21:24:44 (50 views) Solid copy Tex, reccomend STFA. - TabulaRasa 2008-11-17 10:17:18 (10 views) It was more fun our way. - SilberUrS6 2008-11-16 21:30:36 (37 views) It was gettting painful to watch - TXurS6 2008-11-17 06:24:20 (13 views) Whiskey Golf Foxtrot Victor - SilberUrS6 2008-11-16 21:02:37 (16 views)
vacuum swivel T adapter at FPR? - sergeyk 2008-11-16 20:17:03 (19 views) what is purose of swiveling? yes vac leak here could effect your starting - Sloooo4esT 2008-11-17 13:06:30 (7 views) ya, relace with silicone vacuum lines and a proper T size connector. - sk88erguy 2008-11-17 20:51:19 (6 views) mine swivels freely and held vacuum for enough time to convince me to let it alone - ICE RCKT 2008-11-16 20:40:35 (9 views)
26 PSI on the K24... why not. - kday 2008-11-16 19:50:40 (156 views) Ping should be less of an issue in the winter. - 20VT90q 2008-11-17 08:07:55 (29 views) Overspeed and or run out of fuel on stock injectors - 450exc115 2008-11-17 05:57:18 (45 views) Fuel should be OK due to upgraded parts. - kday 2008-11-17 06:36:27 (44 views) Where can you get one of these springs? I searched but only 2 threads on it. - NeversummerS4 2008-11-17 05:04:33 (19 views) 034 Motorsports has them available. Sure others do as well..2Bennett, etc. - scribble 2008-11-17 07:24:13 (15 views) I've been using a 2.2bar spring for quite awhile - AndrewWK 2008-11-16 20:38:02 (70 views) Second on the steering... and K24's are a dime a dozen. I'd rather have fun and risk blowing it. - MiniMan 2008-11-16 20:16:07 (39 views)
Correct LUK clutch kit - thebigjrs 2008-11-16 19:44:58 (43 views) take a LUK at these pictures .....OEM LUK kit 026 for my 95.5 S6 - kinderutz 2008-11-17 13:22:38 (18 views) Re: take a LUK at these pictures .....OEM LUK kit 026 for my 95.5 S6 - thebigjrs 2008-11-17 20:54:41 (8 views) Yes. After all the problems, they changed the listing on their website. But apparently with no comp - UrS4boy 2008-11-17 21:17:55 (9 views) Southbend Stg 3, ,,, - Julian_B 2008-11-16 19:55:44 (28 views) Preach it again my brotha... - Scott_Napier 2008-11-17 04:23:50 (17 views) I'm with them, aftermarket is the way to go on modified cars - 450exc115 2008-11-17 05:59:03 (26 views) Southbend is great, I run their DXR clutch/pp. - Zwoobah 2008-11-17 07:12:05 (23 views)
I now have an RS2 turbocharger, 34# Injectors and MRC Tuning chipset in my possession. - TurboJew 2008-11-16 17:36:26 (94 views) where did you get RS2 turbo?price? - popdemonic 2008-11-16 18:15:49 (42 views) If you have the RS2 EM, the max labour you should pay for is 4 hrs. Cheap. - UrS4boy 2008-11-16 18:01:46 (64 views) I got everything (lightly) used - TurboJew 2008-11-16 18:20:11 (73 views) Therefore, you can afford to pay for a few hours labor to install them. - UrS4boy 2008-11-16 18:38:36 (18 views) well theres no need to pay to install injectors. and the turbo isn't hard is it? why would you pay - sk88erguy 2008-11-16 18:41:17 (46 views) No reason other than not "finding the time" to do it = months and months with parts on the bed. - UrS4boy 2008-11-16 18:44:36 (19 views) Like me. - SilberUrS6 2008-11-16 20:08:21 (47 views) Would* - MiniMan 2008-11-16 20:17:34 (14 views) I'm doing this myself - TurboJew 2008-11-16 18:03:05 (62 views) Procrastination = Gee, why didn't I do THIS before? - UrS4boy 2008-11-16 18:40:14 (48 views) Well if you don't have time - gietl 2008-11-16 17:40:18 (56 views) LOL....I like the way you think... - avantista 2008-11-16 17:54:35 (16 views)
Well before I get banned, :( I had a few pics and a few Qs - 12vA90 2008-11-16 17:19:40 (291 views) Here is the other photo (you can use <img scr="image1.jpg">, <img src="image2.jpg">, etc - UrS4boy 2008-11-16 18:04:19 (166 views) That's the coolant sensor that sits in the plastic T behind the engine next to the firewall - AndrewWK 2008-11-16 18:09:44 (68 views) well my hvac controls are really glitchy, could this be my issue? - 12vA90 2008-11-16 21:02:01 (34 views) Well it sits in a hose that comes directly out of the back of the block and runs into firewall - AndrewWK 2008-11-17 04:29:47 (107 views) ^^ thankyou - 12vA90 2008-11-17 05:08:24 (13 views) you're welcome, I'm curious as to what you find in that spot? - AndrewWK 2008-11-17 21:38:09 (5 views) If the previous owner was clever... - kday 2008-11-16 18:52:59 (99 views) At least that is where it is SUPPOSED to sit. - UrS4boy 2008-11-16 18:41:04 (29 views) At least learn how to post photos: <img src="yourphotourl.jpg"> - UrS4boy 2008-11-16 17:22:24 (38 views)
EDIGREG: Have you seen these customizable gauges?... - rmccomiskie 2008-11-16 16:41:51 (75 views) Can't say that I have... - EDIGREG 2008-11-16 17:34:11 (33 views) Kewl. Got any pics of your install?... - rmccomiskie 2008-11-16 18:03:51 (84 views) Not yet...will post some eventually though. - EDIGREG 2008-11-16 23:20:50 (10 views)
What should my AFR be at idle? - Jeff_92S4 2008-11-16 15:52:58 (27 views) warm idle should be 14.7:1 - a4kquattro 2008-11-16 16:04:03 (27 views)
Such a small investigation. This -> - oliwer78 2008-11-16 15:31:35 (278 views) ad now deleted, didn't know I could delete them. - 12vA90 2008-11-16 20:55:22 (66 views) I guess "your friend" didn't tell you how? - UrS4boy 2008-11-16 22:41:51 (16 views) Big 2nd on the BAN !!!!! - //Swordfish 2008-11-16 17:10:18 (29 views) My car, my pics, not my post on audifans... - 12vA90 2008-11-16 16:19:11 (147 views) Gotta say that I don't believe you...A better lie would be to claim a typo, you meant 270,000 miles - Fastscirocco 2008-11-16 17:33:33 (26 views) ^^ and thats my biggest fear, Its too bad because I really do like the people on this forum... - 12vA90 2008-11-16 17:49:48 (62 views) Delete the Audifans ad. - UrS4boy 2008-11-16 18:02:49 (21 views) Dave, can you smell it? Theres something in the air - J@RO 2008-11-16 18:32:18 (63 views) Yeh, the "good friend" story is a bit hard to buy. Could be true. But friends like that, who needs - UrS4boy 2008-11-16 18:43:28 (46 views) ... - EDIGREG 2008-11-16 18:40:37 (82 views) LOL. Maybe the mods need this (inside) - UrS4boy 2008-11-16 18:49:33 (95 views) Odometer Rollback Disclosure Act 4549.41 to 4549.51 - J@RO 2008-11-16 19:11:27 (56 views) lol...right...like we don't swap guage clusters all the time around here. - 02ALMSTT 2008-11-16 19:56:25 (53 views) Yes. - SilberUrS6 2008-11-16 19:57:31 (44 views) ;) - EDIGREG 2008-11-16 19:08:41 (19 views) Kick your "good friend" in the nuts because he is doing you harm here, Where's your audifans post? - UrS4boy 2008-11-16 17:23:43 (28 views) I e-mailed this thread to Dan at AF. - SilberUrS6 2008-11-16 20:06:59 (16 views) And That -> - oliwer78 2008-11-16 15:32:50 (147 views) Photos from the Audifans ad - UrS4boy 2008-11-16 17:24:42 (128 views) So what I see is a guy who found out he got cheated is attempting to cheat the next owner. Yes? - UrS4boy 2008-11-16 15:43:41 (86 views) The funny thing to me is he didn't even run a Carfax until after the fact. - TabulaRasa 2008-11-16 16:11:39 (60 views) The price raised up a bit too. :( - oliwer78 2008-11-16 15:48:49 (27 views) That should be a STRAGHT BAN from AudiWorld/Audifans. I dont think that we want dirty rats here... - J@RO 2008-11-16 16:02:05 (70 views) ^^ouch^^ but deserved I guess, Id feel the same way... - 12vA90 2008-11-16 16:21:31 (34 views)
So SAAB just released its new AWD car. Should Audi be scared? - DutchVDub 2008-11-16 15:17:45 (28 views) SAAB's last gasp of relevance was back in '99 when the 9-3 Viggen was compared to the B5 S4 - TabulaRasa 2008-11-16 15:39:15 (58 views) I wouldn't compare a viggen to much more than a sport-pack jetta GLS VR6 - ICE RCKT 2008-11-16 21:31:31 (18 views) The 9-3 Viggen would have been better compared to a TT, IMO. GM quality is sub par, relative to Audi - MiniMan 2008-11-16 16:37:31 (16 views) My brother inlaw is a Saab tech - 450exc115 2008-11-17 08:00:16 (22 views) something to be said of the utility of the original 900t, my girlfreind has had one for 4 years now - 12vA90 2008-11-16 16:32:49 (29 views) Has what...haldex again....LOL - J@RO 2008-11-16 16:05:06 (14 views)
Current part # for 1.8T conversion coil - CarNut68 2008-11-16 14:27:56 (22 views) My sources say that the 115R's are still the latest. Where are we getting the S's from? - js0ne 2008-11-16 16:10:56 (8 views) I did a search and 115S = V8 S4 = incompatible with 2001 A4 1.8T coil - TabulaRasa 2008-11-16 19:38:22 (11 views) OIC, however the 115S' are not the next version of 06B-905-115-R's, because... - js0ne 2008-11-17 05:34:58 (15 views) they're totally compatible...the pinouts are the same and the dave F harness works just fine - Tornado //S6 2008-11-16 20:42:44 (8 views) Search reveals... - TabulaRasa 2008-11-16 20:48:43 (20 views) physically, they could be different... - Tornado //S6 2008-11-16 20:55:15 (19 views) much more/less work to trim them to fit vs the 115R? for the record... how long have you run these? - ICE RCKT 2008-11-16 21:28:36 (11 views) I didn't trim them at all. I've been running them for 6 months with no problems so far - Tornado //S6 2008-11-17 10:41:28 (9 views) thanks for the info :) they don't happen to come in red do they? - ICE RCKT 2008-11-17 22:21:37 (6 views) Nope, they look very similar..I was hoping for the red trim but they're all black - Tornado //S6 2008-11-18 06:49:53 (3 views) 115S. 115R's are still unreliable - I've had 3 failures in a year. - Tornado //S6 2008-11-16 15:02:56 (15 views) 3 failures in a year??? Should I even bother or... - CarNut68 2008-11-16 15:48:30 (24 views) 115S's are from the B6 S4(V8). They were initially much higher priced than the 115R's - Tornado //S6 2008-11-16 20:45:42 (26 views) Yeah, but if it costs as much as stock, why not just go with stock? - TabulaRasa 2008-11-16 16:05:54 (23 views) 115R edit: DOH! I got "R"s back in '07. Already lost one. - TabulaRasa 2008-11-16 14:49:28 (12 views) I don't know E (sounds too old but maybe they started over) 115R or 115S. Eric? - UrS4boy 2008-11-16 14:34:56 (15 views)
Would a CPS failure cause no fuel AND no spark? - cs_729 2008-11-16 12:13:57 (19 views) Yep. That's why I asked about the CPS plug. Have a read on this from the FAQ (inside): - UrS4boy 2008-11-16 12:24:10 (19 views) I still have no CEL light though? Wouldn't I get a CEL? - cs_729 2008-11-16 12:49:51 (19 views) Follow Fred Munro's timing mark procedures. As for the CPS throwing a CEL? Not necessarily. - UrS4boy 2008-11-16 13:49:04 (16 views) So if my CPS was working correctly but my timing was slightly off, wouldn't i still get spark/fuel? - cs_729 2008-11-16 17:55:54 (11 views) The CPS is behind the exhaust cam sprocket. The disc on the sprocket triggers the CPS. If things - UrS4boy 2008-11-16 23:35:50 (10 views)
Is there some trick to removing the serp belt/tensioner? - EDIGREG 2008-11-16 12:12:45 (37 views) Thanks...I ended up removing the fan... - EDIGREG 2008-11-16 15:39:12 (20 views) I thought Jimmy just had the TB done recently? - TabulaRasa 2008-11-16 16:37:47 (9 views) It was about 30k miles ago at this point... - EDIGREG 2008-11-16 17:30:08 (14 views) Not necessary to remove the fan. - kday 2008-11-16 15:06:52 (19 views) Yeah it is much easier to remove the fan to access the bolt, especially if you are - cs_729 2008-11-16 12:51:00 (23 views)
Quick Help...Washer from front suspension - 02ALMSTT 2008-11-16 07:36:03 (145 views) I do not appear to have one of those "Pot Washers." Anyone have one or a Part # / source???? - 02ALMSTT 2008-11-16 16:32:24 (16 views) Part number 4A0412339A Try Genuineaudiparts.com - turbos4audi 2008-11-16 17:02:01 (18 views) These are the parts required for the strut mounts. - turbos4audi 2008-11-16 12:23:40 (81 views) What you are calling the "pot washer" is what prevents the shaft from pushing through the mount - js0ne 2008-11-16 16:20:06 (18 views) The pot washer is the one to the left. It sits just below the mount and does just what you said. - turbos4audi 2008-11-16 17:00:49 (15 views) I believe that is a failed Meyle strut mount not a missing washer. - Fastscirocco 2008-11-16 09:56:22 (33 views) Assembling it properly.......Yeah - urs4hb 2008-11-19 09:50:13 (17 views) Hey Arse Clown...the washer was missing when I disassembled it, so Piss Off you Twit.. - 02ALMSTT 2008-11-19 16:10:39 (10 views) these are known to fail in the same manner with or without the "washer" or "pot cup thingy" - js0ne 2008-11-19 11:12:34 (12 views) Why so rash? - turbos4audi 2008-11-19 10:34:15 (12 views) Re: My bad sorry..................... - urs4hb 2008-11-20 09:50:08 (14 views) according to the Techs at Blauparts it should have had a washer...but I'm quickly - 02ALMSTT 2008-11-16 10:23:35 (61 views) Check out these links - Fastscirocco 2008-11-16 11:29:21 (52 views) Re: Check out these links - Fastscirocco 2008-11-16 11:29:49 (44 views) If you look up from the Spring side you can see the steel "pot", it'll be obvious if it's missing. - Fastscirocco 2008-11-16 11:38:07 (30 views)
Getting ready to throw the car up on Ebay. - S6 4RiNGS 2008-11-16 06:24:35 (83 views) With a leaking gas tank? I bid $1 : - ) - Fastscirocco 2008-11-16 09:57:32 (15 views) Fixed with new tank. - S6 4RiNGS 2008-11-16 10:56:43 (13 views) Good luck. - popdemonic 2008-11-16 09:10:43 (36 views) Lexus holds it's resale value pretty well. Good luck! - TabulaRasa 2008-11-16 06:37:39 (18 views)