ANYONE find an exact match to the RS4/Kamei grill diamond shapes......
#1
AudiWorld Super User
Thread Starter
Join Date: Mar 2000
Posts: 3,236
Likes: 0
Received 0 Likes
on
0 Posts
ANYONE find an exact match to the RS4/Kamei grill diamond shapes......
From say Ace, or Home Depot? I have seen where people replace the lower plasic pieces but usually they are using a much smaller diamond shape, about 1/2 the size. I am looking for the same size and will have it powder coated to match. TIA
#5
This is close...
<center><img src="http://pictureposter.audiworld.com/2611/bonda01s4grille2.jpg"></center><p>Seemed to be the closest metal match to the measurements I took off my RS4 hood grille.
See my original post below also for Greyhound Guy's use of Allroad mesh...
McMaster-Carr supply company (www.mcmaster.com)
Part number: 9305T46 (type that in and hit 'find')
4' Long x 4' Wide .625" x 1.750" Opening Size .125" Thick Flattened Mesh .125" Gauge Temper H14 Alloy 3003 Aluminum Expanded Sheets<ul><li><a href="https://forums.audiworld.com/s4/msgs/354217.phtml">click me to see original post</a></li></ul>
See my original post below also for Greyhound Guy's use of Allroad mesh...
McMaster-Carr supply company (www.mcmaster.com)
Part number: 9305T46 (type that in and hit 'find')
4' Long x 4' Wide .625" x 1.750" Opening Size .125" Thick Flattened Mesh .125" Gauge Temper H14 Alloy 3003 Aluminum Expanded Sheets<ul><li><a href="https://forums.audiworld.com/s4/msgs/354217.phtml">click me to see original post</a></li></ul>
#7
check out grey hounds article also, Im not sure if this applies, cuz I dont know if you made plans
to remove the horizontal slats on your bumper or not...but Greyhound is the master modder, along with Dave, James R, and Ed P<ul><li><a href="http://www.georgeryon.com/audi/grill.html">http://www.georgeryon.com/audi/grill.html</a</li></ul>