Need some help replacing primary O2 sensors
#1
AudiWorld Super User
Thread Starter
Join Date: Apr 2001
Posts: 7,817
Likes: 0
Received 0 Likes
on
0 Posts
Need some help replacing primary O2 sensors
I'm trying to figure out if I'm even capable of doing this or not. So I went searching around he engine bay to look for everything I would need to remove and reinstall to access the primary O2 sensors.
First, I traced the wires coming from the O2 sensors to some wiring harnesses on the drivers and passengers sides of the firewall. I assume there is one harness on each side for the primary O2s but I could trace the wire all the way back because of the heat shield wrapped around the cables. Do you guys know which one is the right ones. Here's some pictures
Drivers side harnesses
<img src="http://pictureposter.audiworld.com/19077/drivers_primary_o2_harness.jpg">
Passengers side harnesses
<img src="http://pictureposter.audiworld.com/19077/passengers_primary_o2_harness.jpg">
Then I tried to see how easy it would be to reach the sensors to see if I can actually get a crows foot down there to take them out and put the new ones back in. How the heck to you get your hands all the way in. I tried coming in from all angles but there was no easy ways. Any tips? Here's some pictures of the sensors
Drivers side O2 sensor (this one looks like a real bitch to get to)
<img src="http://pictureposter.audiworld.com/19077/driver_primary_o2.jpg">
Passengers side O2 sensor (this one looks like its much easier but still a stretch)
<img src="http://pictureposter.audiworld.com/19077/passenger_primary_o2.jpg">
First, I traced the wires coming from the O2 sensors to some wiring harnesses on the drivers and passengers sides of the firewall. I assume there is one harness on each side for the primary O2s but I could trace the wire all the way back because of the heat shield wrapped around the cables. Do you guys know which one is the right ones. Here's some pictures
Drivers side harnesses
<img src="http://pictureposter.audiworld.com/19077/drivers_primary_o2_harness.jpg">
Passengers side harnesses
<img src="http://pictureposter.audiworld.com/19077/passengers_primary_o2_harness.jpg">
Then I tried to see how easy it would be to reach the sensors to see if I can actually get a crows foot down there to take them out and put the new ones back in. How the heck to you get your hands all the way in. I tried coming in from all angles but there was no easy ways. Any tips? Here's some pictures of the sensors
Drivers side O2 sensor (this one looks like a real bitch to get to)
<img src="http://pictureposter.audiworld.com/19077/driver_primary_o2.jpg">
Passengers side O2 sensor (this one looks like its much easier but still a stretch)
<img src="http://pictureposter.audiworld.com/19077/passenger_primary_o2.jpg">
#3
Heh....sorry man, I paid a shop to do this. I knew I didn't have it in me to even attempt it.
If it's not right there for me to wrench on, I ain't doing it....even then I manage to screw it up sometimes. Good luck.
#5
AudiWorld Super User
Thread Starter
Join Date: Apr 2001
Posts: 7,817
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. I guess I'll try the drivers side first to make sure I get that out of the way.
If I can't get that one out, I'll just give up and take it somewhere. Looks like I need to order some Zoldman O2s from Vast.
Trending Topics
#9
Crowsfoot O2 socket is the key here.
I used a 2 foot extension with a wooble and the crowsfoot.
The drivers side is a huge PITA, getting the new one back in was also a huge PITA.
Passengers side one is a straight shot and relatively easy.
The drivers side is a huge PITA, getting the new one back in was also a huge PITA.
Passengers side one is a straight shot and relatively easy.
Thread
Thread Starter
Forum
Replies
Last Post
adrian.denizs4
S4 / RS4 (B5 Platform) Discussion
2
01-29-2010 05:31 AM
98Quattro
A6 / S6 (C5 Platform) Discussion
14
05-31-2008 04:32 PM
inliner311
S4 / RS4 (B5 Platform) Discussion
0
06-13-2007 11:15 AM
shrtbus(w/ cq)
12v V6 Discussion
1
06-12-2003 08:30 AM