Possible to pull AWE headers W/O pulling motor?
07-21-2006, 04:09 AM
#1
Junior Member
Thread Starter
Join Date: Aug 2001
Posts: 1,273
Likes: 0
Received 0 Likes
on
0 Posts
Possible to pull AWE headers W/O pulling motor?
<center><img src="http://pictureposter.audiworld.com/24533/dsc01126.jpg"></center><p>
Has anyone removed headers without pulling motor? I have cracked leaking headers - both sides- that need to be removed to send back to AWE for warranty replacement . Since AWE will not send replacements upfront I'm trying to do this in as frugal a manner as possible , IE keep time/labor charges to a minimum.
Has anyone removed headers without pulling motor? I have cracked leaking headers - both sides- that need to be removed to send back to AWE for warranty replacement . Since AWE will not send replacements upfront I'm trying to do this in as frugal a manner as possible , IE keep time/labor charges to a minimum.
07-21-2006, 05:13 AM
#6
Junior Member
Thread Starter
Join Date: Aug 2001
Posts: 1,273
Likes: 0
Received 0 Likes
on
0 Posts
Re: cracked? you too ?
Has this been a frequent problem with the AWE headers?
My driver side is cracked at port one at the flange to the block. Passenger side not positive where yet but we can see the exhaust soot from leak. Plus the Swain Tech coating is flaking off badly.
My driver side is cracked at port one at the flange to the block. Passenger side not positive where yet but we can see the exhaust soot from leak. Plus the Swain Tech coating is flaking off badly.
Trending Topics
07-21-2006, 05:21 AM
#10
Not trying to be a pain, but just curious why? It would seem that if the guy agrees to pay IF...
it's not a warranty issue (because I'm sure you guys don't want used headers back) then it wouldn't make a difference.
Just makes the guy's life a tiny bit easier. I'm not sure I see the downside for you guys to do it as a "core" charge.
Just makes the guy's life a tiny bit easier. I'm not sure I see the downside for you guys to do it as a "core" charge.