* VAG-Com
* Driving school
* It's from an M3
* They won't fit
* STFA
* Neuspeed 19mm on stiff
* MotorSports..but Penske's are close
* AWE
* VAST for sure
* e-codes
* BlackStone, it takes about a week
* From the S8..new carriers and rotors
* 5x112
* No..that sound is normal
* Try iRotors.com
* EVO Intake = skip unless you're Stge III
* Chip + Exhaust, Chip + Exhaust + DP's
* No..it means Down Pipes
* Chip + Exhaust + DP's + K04's or larger
* Buehne
* STaSIS Alcons if you are a Baller..other wise Stoptech
* Josh pretty much started it..
* bigbluemachine
* Boost Gauge
* X1-Racer...get on the list, it'll come
* BTDT
* Jeff Moss=Torque Factory
* DarIntake > S-Flow > EVO
* Just open the door and wait till the door chime stops
* Swap the panel filter for an ITG foam
* They are gutted DP's named after they guy who did it first..Piggie
* Yes
* The GT25 car
* An after-run coolant switch..about $35 from ECS
* Corner balance it..it's worth the $$
* Check over on AZ
* v5.0 is smoother
* VAST=Piggie & Piggie=VAST
* No..you shouldn't put eyelids on
* H-Sports or Intrax ARB's
* That would be Pat SoCal
* Yes, they can work, but we'll bust your balls so don't do it
* Wicked Motorsports
* They're not going to last..change them when you get springs
* Valentine One
* Phenolic Spacers
* Miltek is quiet, Borla is a perfect fit and sounds cool
* Custom 3" or 4" Oval
* From the RS4..it snaps right in
* Edy Jun's FAQ
* You paid with credit card?? Expect some unexpected charges
* Did you VAG it?
* MarkP's website
* Short the wires..it'll go out
* As long as the rolling diameter is the same you're fine
* FunkWeasel
* Waseem..but he was nuts
* Did you bother STFA?
* Peanut Butter Jelly Time..
* You should have used PayPal
* Too much Carbon Fiber..But heck..if you like it..
* It doesn't really matter, both are good and that feud is like four years old
* Ronal
* Because you can't have FOR SALE Posts here..
* That's normal..it's the AC dripping
* Axxis Delux & Hawk HPS
* It won't interfere with the air-bag
* You need euro blinker fluid
* I have no idea who she is..It's a pic I found on the web..
* yes, she's hot
* No, that is the bottom of the picture
* It will fry your pistons
* Yes, I'm the one..I'll email you info
* There's a Tech article for that
* Samco will work just fine..APR Bi-Pipe if you are worried
* Tap 75x or the #27 fuse
* Less then a dozen wide bodies as far as we know
* It's LI-S4..not LISA, and no..I'm not a chick
* Avalon
* Boser? VTB
* It's coming from your washer resevoir
* The RS4 clutch unless you are going to launch it hard
* Just use 710N's and zip ties are fine
* RAD locks from PURE
* Two weeks
* Try ClairParts or Shokan
* TfT=Toys for Totts and it's for the kids so just do it
* AquaMist
* Gutt the stock grills & insert the RS4 mesh
* You'll need spacers and will probably need to roll the fenders
* That's because you're lowered
* I said..STFA

I just answered your first fifty or so questions...

Check out the links in my sig for more information and email everyone on the forum you phone and address in-case we need to co-ordinate a "mod intervention" for you..it's that addictive!!

Welcome and have fun!!

"My wheel bolts require more torque than your Honda makes..."


Valentine One Remote Display

My Wheel Repair NASA Style

** The Unofficial AW Buyer / Seller Feedback Thread **

The nOOb FAQ ~ LI-S4 Style
Everything I write is my opinion. You are free to adopt it or discard it. If I say it, it's because I believe it to be 100% true...That is all.
...THE FIRST MOD SHOULD BE DRIVING SCHOOL - O.W.K.