AudiWorld Forums: I hadn't thought of it that way.... As for the gaskets.

Paris 2008: Full Video and Photo Galleries Online

World Debut: Audi A1 Sportback concept

Now Supercharged: 2010 Audi S4 Sedan & Avant

B6 S4 Forum || B7 S4 Forum || B7 RS 4 Forum

[Thread] [Post Followup] [Post Picture] [Search Forums] [S4 / RS4 (B5 Platform) Discussion]

I hadn't thought of it that way.... As for the gaskets.

Posted by: SmokinS4 on 2006-04-06 11:17:43
Account #: 18942

In Reply to: Quite impressive. posted by Mike2kS4@ASP on 2006-04-06 11:11:07

No pics, but they are made by VW/Audi. OCT has them custom made, but they are identical to the RS4 and stock S4 gaskets, just a tad thicker.

The RS4 gaskets (which I have a new set at home) will lower compression to 9.0:1 and are readily availble.

OCT (stratmosphere) has the gaskets, but MTM uses them too, but Hoppen sucks donkey balls...so I got them thru OCT.

MTM had the same gaskets (oem manufacturing too)....but they won't sell them outside their kits.

---------------------------------------
Matt's Mad Beast: Blouch K04/997 hybrids, RS4 intake&cams with port-matched heads, 60lb injectors, the rest of the supporting cast
EPL Tuning v4.0 93oct 463whp (70F) April 2007
EPL Tuning v3.0 93oct 460whp (40F) Jan 2007
EPL Tuning v2.0 100oct 480whp Jan 2007
EPL Tuning v2.1 100oct program 06-23-2006
471whp @ 7000rpm, 449 lb/ft @4023 rpm

EPL Tuning v1 93oct progam 04-05-2006
418whp @ 7150rpm, 430 lb/ft @3853 rpm

EPL Tuning v1 93oct prog w/100oct (no adapt) 5-13-2006
437whp@6714 427wtorq@3884

Custom Tuned by EPL

picture poster part 1 picture poster part 2
picture poster part 3 picture poster part 4
Ask me why my last set of turbos blew

Thread:

418whp @ 7150rpm, 430 lb/ft @3853 rpm - SmokinS4 2006-04-05 19:49:39 (1871 views)

Was the car dynoed in 3rd gear? I noticed the speed was indicated at 104.8 mph at 7150 rpm. - M007 2006-04-07 17:10:36 (191 views)

Yes, dynoed in 3rd. - DAP 2006-04-07 17:20:10 (255 views)

Thanks for your response. - M007 2006-04-07 17:23:20 (197 views)

At what boost? - box_of_partS4 2006-04-06 08:52:57 (203 views)

18-19psi to 7150 rpm - SmokinS4 2006-04-06 10:03:18 (266 views)

great stuff!!!! - Ray Khan 2006-04-06 05:55:48 (219 views)

Good for you. I bet your on sub3 FATS now. - smurfbus4 2006-04-06 05:07:28 (196 views)

jeebuz christ...thats the greatness...congrats. - L0rd of the Rings 2006-04-05 21:36:03 (203 views)

i'm sorry....but i think i have asked you this question before, but what mods are you running again? - Arcteryx 2006-04-05 21:16:40 (248 views)

The short list: RS4 intake/ported/matched heads, RS4 cams, hybrid (AmD) turbos, etc - SmokinS4 2006-04-06 02:49:16 (392 views)

Hybrid mitsu/k04 turbo (desc) - SmokinS4 2006-04-06 02:52:27 (922 views)

Very interesting. You have any pictures of these turbos? - Mike2kS4@ASP 2006-04-06 10:16:05 (220 views)

of course. How about comparisons to straight K04s? - SmokinS4 2006-04-06 10:47:41 (469 views)

very nice.....30psi WOW. - Arcteryx 2006-04-06 10:52:26 (210 views)

only after I manage to adjust the wastegates....which is a PITA - SmokinS4 2006-04-06 10:56:14 (311 views)

Quite impressive. - Mike2kS4@ASP 2006-04-06 11:11:07 (304 views)

Mike, any more information on this process? - christian (Stage 1) 2006-04-06 11:21:14 (233 views)

Just get a 10mm combination wrench and grind the combo end so it's shaped like a C... - Mike2kS4@ASP 2006-04-06 12:20:57 (267 views)

Air regulated at 5-9psi via a standard pressure/boost leak tester? - christian (Stage 1) 2006-04-06 12:40:28 (205 views)

Just a normal air-compressor regulator should do fine... - Mike2kS4@ASP 2006-04-06 13:18:49 (300 views)

Yes, but are you hooking the air line up to the WG itself, or are you just pressurizing the system. - christian (Stage 1) 2006-04-06 13:23:59 (207 views)

You have to tap into the WG line off the N75 valve, have to test WG separately. - Hal_S4Shizzle::CBP 2006-04-06 13:32:41 (210 views)

Thanks Hal. :) We'll have to give this a shot. Thanks Mike! - christian (Stage 1) 2006-04-06 13:34:08 (178 views)

I think another 8psi would be allot of fun =) - SmokinS4 2006-04-06 11:22:40 (215 views)

I hadn't thought of it that way.... As for the gaskets. - SmokinS4 2006-04-06 11:17:43 (255 views)

very nice, sorry havent been following very closely... - Ken WA 2006-04-05 21:00:29 (234 views)

AMS K04 code is weaksauce. :) - christian (Stage 1) 2006-04-06 07:31:07 (211 views)

on the Scoville scale - SmokinS4 2006-04-06 08:27:28 (344 views)

Haha. That's a great comparison. :) - christian (Stage 1) 2006-04-06 08:39:12 (184 views)

The problem I had was with the previous tuner - SmokinS4 2006-04-06 02:54:10 (245 views)

Noice. What octane? - Mike2kS4@ASP 2006-04-05 20:12:40 (234 views)

You should take your car to the Mustang @ EPL...for comparison's sake =) - box_of_partS4 2006-04-06 06:03:09 (186 views)

Thanks, but I doubt I could go to EPL... I'd have to block off an entire day. - Mike2kS4@ASP 2006-04-06 10:26:18 (192 views)

Re: Thanks, but I doubt I could go to EPL... I'd have to block off an entire day. - Mark P 2006-04-06 10:42:51 (229 views)

He's having a dyno-day at the end of the month - SmokinS4 2006-04-06 06:06:47 (238 views)

5/13 - detail to be posted soon (hopefully tomorrow) - Mark P 2006-04-06 07:18:07 (201 views)

Here's the details of the 5/13/06 Dyno Day at EPL.... - Mark P 2006-04-11 06:55:37 (207 views)

hmmmm...might be better for me to dyno here instead of KTR since Tony has plenty of numbers from - Ray Khan 2006-04-06 08:35:13 (239 views)

I know you mean Mike, but I'll come and throw down some stock S4 numbers =) - box_of_partS4 2006-04-06 07:12:34 (198 views)

93 - SmokinS4 2006-04-06 02:39:09 (197 views)

Quite impressive. Congrats, it's been a long time coming. - PiggieSmalls 2006-04-05 20:08:16 (232 views)

wow . . . - Jeff Doyle - boscoj 2006-04-05 20:07:23 (226 views)

Big improvement. Congrats. - Hal_S4Shizzle::CBP 2006-04-05 20:03:37 (208 views)

Great power curves. - LCP 2006-04-05 20:00:53 (207 views)

Good stuff matt. Glad to see you still around. - ECD212 2006-04-05 19:54:30 (234 views)

Glad to see you're still around - SmokinS4 2006-04-05 20:00:30 (281 views)

She is alittle old. You never finished yours. We just completed a widebody.. - ECD212 2006-04-05 20:05:46 (287 views)

Yeah - ECD212's car is my car's idol. - christian (Stage 1) 2006-04-05 20:01:55 (215 views)

2nd - LI-S4 2006-04-05 20:15:27 (387 views)

Tracked my other wheels and they are set to arrive tomorrow. Can I use... - ECD212 2006-04-05 20:21:39 (239 views)

Sure just give me more then ten minutes notice!! - LI-S4 2006-04-05 20:22:43 (193 views)

If they arrive early I will mount them before I come up for that thing in your office. - ECD212 2006-04-05 20:26:02 (212 views)

Good idea...that ought to tone the car down just enough... ;-) - LI-S4 2006-04-05 20:36:17 (216 views)

Trustworthy? Humm - ECD212 2006-04-05 20:17:20 (206 views)

thanks christian. Silver is fastest. - ECD212 2006-04-05 20:06:36 (194 views)

Damn straight it is. :) - christian (Stage 1) 2006-04-05 20:07:37 (224 views)

And smooth as a baby's bottom. :) Your car definitely kicks ass now, Matt! - christian (Stage 1) 2006-04-05 19:53:43 (248 views)

You must be registered and logged in to post. Please select an option: