My2ndS4

put the latency timer to 1ms. To do this, plug in your vag-com cable to the usb port you setup to use with lemmiwinks, then open up device manager. Click on ports, and you should see the port that you setup for lemmiwinks. Double click on it, and go to the options tab. Click on the advanced options tab, then put the latency timer to 1ms. This is all from my memory, but it should work.


Specifically, if you get the following error, this procedure should correct it: "ECU uses unknown protocol (KW: 01/8A)"

Thanks to Uwe at Ross-tech for the help!

mtmOla'

i cant get the thing to connect. I connect through com3 and lemmiwinks says something like bad connection 055 or something like that.

My2ndS4

Try the procedure I used in the link in my sig

PSmalls::DoggieStyle

Damn, I was all excited until I read the end and see it doesn't address the error message I get.