Samco TBB from AWE going in tonight...any pointers, tips, suggestions out there? TIA.
#2
Loosen the Bi-pipe screw on each side, buy industrial zip ties or new clamps,
cut the top of the sensor hole so the sensor doesn't stick up so high, that way (if you want it) you can put the front cover back on. Don't drop anything in the TB. That should be about it. I got it down in 15-20 min' for my first time. Super easy DIY.
#4
i got a good tip for ya :
sell it and get couple new STOCK TBB-s and use the stock clamps .
or if you really want to use the samco get new clamps the seal well (use the stock clamp for the tbb-tb side).<ul><li><a href="https://forums.audiworld.com/s4/msgs/2198410.phtml">https://forums.audiworld.com/s4/msgs/2198410.phtml</a</li></ul>
or if you really want to use the samco get new clamps the seal well (use the stock clamp for the tbb-tb side).<ul><li><a href="https://forums.audiworld.com/s4/msgs/2198410.phtml">https://forums.audiworld.com/s4/msgs/2198410.phtml</a</li></ul>
#6
So far, so good. I wouldn't suggest the HD or Auto part store kind, but
good quality (police hand cuff style)are very strong and thick. I've been using them on the TBB, and DV's for about 3K-4K miles. Much easier for taking on and off too. Cut, and replace w/ new ones.