labree dp's split pipe...
#1
AudiWorld Expert
Thread Starter
labree dp's split pipe...
many ppl are saying they hang too low, i already have issues with clearance (24.75 all around) and i live in nyc. i have a 3" milltek, and it already hangs low: <img src="http://pictureposter.audiworld.com/20532/resized_ass.jpg">
what other options are around??? (my first option was to go with milltek dp's but the promo is over, and theyre back up 2k, second place was/is awe dp/test pipes any thoughts on those in regards to height/hanging?)
what other options are around??? (my first option was to go with milltek dp's but the promo is over, and theyre back up 2k, second place was/is awe dp/test pipes any thoughts on those in regards to height/hanging?)
#5
AudiWorld Expert
Thread Starter
how did you go about tucking them up like that? how did you go around the dp's hanging low?
when the installer tried to tuck up the exhaust the piping would lean against the body and resonate through out the cabin (LOUD), "supposedly",thats the excuse they gave me for the hang. i would like to have it like yours <img src="http://pictureposter.audiworld.com/6924/tips.jpg">
#6
With everything pressed in as tightly as possible, that's how mine hangs.
Make sure they used a rubber mallet to drive each section of the exhaust together as tightly as possible.
If need be, they could bend the hangars to control how low the exhaust sits.
-Dave Pramanik
If need be, they could bend the hangars to control how low the exhaust sits.
-Dave Pramanik
#7
I agree I have the ASPs and don't think they hang too low
AWE's don't hang as low simply because the're smaller diameter after the turbo, they are 3" at the turbo, then taper down to 2.5".