EPL/AMD TiAL 650 install and update (preliminary results and dyno plot)
07-02-2008, 02:04 PM
#1
Former Vendor
Thread Starter
Join Date: Mar 2001
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
EPL/AMD TiAL 650 install and update (preliminary results and dyno plot)
<img src="http://www.eplabs.net/pub/epl_logo.jpg" /><img src="http://www.eplabs.net/pub/AMD.jpg" />
**<B>PREFACE</B>: These are early results, not final. Peak power was achieved at less then 24 psi. Final production tune will hold 27-28 psi to redline.**
<B>EPL</B> in conjunction with <B>AMD</B> is excited to release early results/finding from TiAl's 650 turbo kit. TiAl has gone above and beyond manufacturing a truly bolt on solution that will produce serious power on built motor 2.7 vehicles.
<img src="http://www.eplabs.net/pub/tial_turbos.jpg" />
After many hours of street testing and remote tuning in conjunction AMD in Woodinville WA, EPL's beta ecu calibration file is ready for production release. This file is available in 92, 93, 100 oct as well as water injection optimized. Customers can expect stock like drivability off boost, with approximately 650 bhp under full power. Stay tuned for more updates from AMD and EPL.
<B>3rd Gear Boost Onset</B>
<img src="http://www.addictmotorsport.com/tial_boost.jpg" />
<b>
Dyno Results:
92 oct
530 wheel hps
452 wheel torque</B>
<img src="http://www.addictmotorsport.com/cropped_abrams530.jpg" />
<B>Test car specs</B> :
TiAL 650 Kit
EPL/AMD TiAl Base File
Sportec IC's (made for the RS4)
Sportec dual 2.5" no cats
RS4 Heads Complete
RS4 Intake Manifold and TB
RS4 Bi-Pipe and Y-Pipe
Saenz Rods (Pauter)
Stock Pistons and Headgasket
Stock Airbox with Stock Filter
Aquamist HFS-1 w/ Dual .8mm Jets runing 50/50 METH
EPL 85mm MAF
60lb Injectors
BOOST: SPIKE TO 28 TAPER TO 23.8 AT HP PEAK
**<B>PREFACE</B>: These are early results, not final. Peak power was achieved at less then 24 psi. Final production tune will hold 27-28 psi to redline.**
<B>EPL</B> in conjunction with <B>AMD</B> is excited to release early results/finding from TiAl's 650 turbo kit. TiAl has gone above and beyond manufacturing a truly bolt on solution that will produce serious power on built motor 2.7 vehicles.
<img src="http://www.eplabs.net/pub/tial_turbos.jpg" />
After many hours of street testing and remote tuning in conjunction AMD in Woodinville WA, EPL's beta ecu calibration file is ready for production release. This file is available in 92, 93, 100 oct as well as water injection optimized. Customers can expect stock like drivability off boost, with approximately 650 bhp under full power. Stay tuned for more updates from AMD and EPL.
<B>3rd Gear Boost Onset</B>
<img src="http://www.addictmotorsport.com/tial_boost.jpg" />
<b>
Dyno Results:
92 oct
530 wheel hps
452 wheel torque</B>
<img src="http://www.addictmotorsport.com/cropped_abrams530.jpg" />
<B>Test car specs</B> :
TiAL 650 Kit
EPL/AMD TiAl Base File
Sportec IC's (made for the RS4)
Sportec dual 2.5" no cats
RS4 Heads Complete
RS4 Intake Manifold and TB
RS4 Bi-Pipe and Y-Pipe
Saenz Rods (Pauter)
Stock Pistons and Headgasket
Stock Airbox with Stock Filter
Aquamist HFS-1 w/ Dual .8mm Jets runing 50/50 METH
EPL 85mm MAF
60lb Injectors
BOOST: SPIKE TO 28 TAPER TO 23.8 AT HP PEAK
