5X112 19X8.5 ET30 IN THE FRONT 19X9.5 ET40 IN THE REAR
#1
Member
Thread Starter
Join Date: Nov 2005
Location: Colorado Springs, CO
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
5X112 19X8.5 ET30 IN THE FRONT 19X9.5 ET40 IN THE REAR
im just wondering if they will fit? if they do will they rub? will i need spacers in the front? sorry im just a noob with a questions about fitment?
#4
Member
Thread Starter
Join Date: Nov 2005
Location: Colorado Springs, CO
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
on 18" prolly 40 or 35 profile tire and whatever width fits. ------------->
did your ch's fit stock or did you do some modifiying to make them fit?
#5
AudiWorld Super User
Join Date: Oct 2002
Location: Seattle area
Posts: 10,857
Likes: 0
Received 0 Likes
on
0 Posts
Need some fender rolling for lowered suspension to fit 255/35/18s. CH offset of 35 is good...
Also needed fender rolling for previous 235/40/18's on 18x8.5 ET 35.
Bruce
Bruce
#6
ET 30 on an 8.5" wheel in the front is out there.
You'll probably be past the fender. My wheels are 8.5" wide and ET37 and they're just about even with the fender. I don't rub but I'm not that low. 9.5" in the back is pretty wide too. You definitely won't need spacers cause you'll probably be too far out already.
Trending Topics
#8
i'm running that with 6mm spacers in rear
to clear the control arms. Rear rubs on big bumps or really hard cornering, but perfectly streetable (I have eibach springs + bilstiens)
You can stagger AWD just fine if you match rolling diameter. It increases understeer, but looks really mean.
You can stagger AWD just fine if you match rolling diameter. It increases understeer, but looks really mean.
Thread
Thread Starter
Forum
Replies
Last Post
jujuC6
Audi allroad
15
04-29-2013 03:18 PM
lithium15
S4 / RS4 (B5 Platform) Discussion
5
02-03-2005 01:44 PM
Type44Q
Audi 5000 / 200 / V8 Discussion
9
06-02-2003 07:31 AM
YS4
S4 / RS4 (B5 Platform) Discussion
23
10-21-2002 11:59 AM
HallmarkAUDI
A4 (B5 Platform) Discussion
5
09-25-2002 06:12 AM