2013 s4 Cannot get vagcom remote windows down/up fully working
#11
Audiworld Junior Member
Thread Starter
Join Date: Jun 2012
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I enabled it. When I enable the rear windows to go down all my windows go down 1/10 of the way and stop. They won't go back up or down again via remote until I go back in and turn the windows setting off for everything. I can have my sunroof fully open and my front windows fully open via remote. This problem only happens with the back windows enabled.
#12
Audiworld Junior Member
Thread Starter
Join Date: Jun 2012
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
You have me stumped I haven't had any issues with mine working with or without the rear windows. Maybe there is a coding difference with the 2013s?
I know there is for ADS on 2013 cars.
Another stupid question... I was looking at the audienthusiasts site... and wondering if you have this setting active..
<snip>
Incremental drivers window up and down**
Not sure how useful this will be but it makes the window go up and down only a few inches with each button press.
[42 - Door Elect, Driver]
[Coding - 07] -> [Long Coding Helper] -> Byte 3 Bit -> 2 Change 0 to 1
</snip>
I know there is for ADS on 2013 cars.
Another stupid question... I was looking at the audienthusiasts site... and wondering if you have this setting active..
<snip>
Incremental drivers window up and down**
Not sure how useful this will be but it makes the window go up and down only a few inches with each button press.
[42 - Door Elect, Driver]
[Coding - 07] -> [Long Coding Helper] -> Byte 3 Bit -> 2 Change 0 to 1
</snip>
#13
Audiworld Junior Member
Thread Starter
Join Date: Jun 2012
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Well I returned the cable to the person who let me borrow it. I am going to have to throw in the towel on this one for now. I am happy with front windows and the sunroof opening all the way.
If anyone knows definitely post the advice for a future VAGCOM user. =) Thanks everyone.
If anyone knows definitely post the advice for a future VAGCOM user. =) Thanks everyone.
#14
AudiWorld Super User
In the above Vag module, I had a check box for "Comfort Operation: Remote Control Active". That's simply what I checked and it worked fine with the new settings in the MMI. I did not change any other bits on my own. Is it possible you changed both the the check box and changed the bytes/bits resulting in some kind of conflict?
Thread
Thread Starter
Forum
Replies
Last Post
Carista
Q5/SQ5 MKI (8R) Discussion
23
10-30-2023 02:25 PM
pavanpopi
A4 (B8 Platform) Discussion
7
08-19-2016 09:00 PM
MichiganA8L
A8 / S8 (D4 Platform) Discussion
1
05-21-2012 10:47 AM