Go Back   AudiWorld Forums > Audi Models > Audi S4 / RS4 > S4 (B6 & B7 Platforms) Discussion
Sign in using an external account
Register Forgot Password?


S4 (B6 & B7 Platforms) Discussion Discussion forum for the B6 Audi S4 produced from 2003-2005 And B7 Audi S4 produced from 2005 -2008

Welcome to AudiWorld Forums!
Welcome to AudiWorld.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the AudiWorld Forums community today!


Reply
 
 
 
 
LinkBack Thread Tools Search this Thread Display Modes
Old 02-07-2014, 02:29 PM   #1
AudiWorld Newcomer
Account #: 276676
 
Join Date: Feb 2014
Posts: 1
Default newbie questions 2007 S4 convert

I am new here. just registered. I think I want to buy an 2007 s4 convertible. What are the problems to look for? Where can I find the general discussions on models and specs? What about FAQ's? Sorry to be the newbie pest but as soon as I get oriented to the site I promise not to ask too many stupid questions. Thanks.
Torquemeister is offline   Reply With Quote
Old 02-11-2014, 07:53 AM   #2
AudiWorld Newcomer
Account #: 240533
 
Join Date: Aug 2012
Location: Alexandria, Virginia
Posts: 7
Send a message via AIM to keithwbloom Send a message via Skype™ to keithwbloom
Default

As the very satisfied owner of a 2007 S4 Cabriolet 6MT with 90K miles, I applaud your taste in motors, sir.

Two things I did before purchasing my relatively high-miles-for-model-year B7:

1) Thorough PPI by a reputable Audi specialist, including a compression test and boroscope. The cylinder wall in B6 and B7 4.2 are prone to scoring if pushed too hard immediately after cold starts. Easy warm ups from cold start to operating temp (90C) are recommended before pushing rev counter past, say 3000 RPM.

2) Make sure you are able to get PPI with a cold start. The problems cited with with the B6/7 4.2s are related to timing chain guide wear/failure that is most detectable from a cold sump start. Once the engine is warm, the sound of the chain rattling on worn guides, is far less noticeable.

I was very concerned about potential service costs on the B6/7 S4, but being comfortable with the chassis/platform, I felt much more confident once I saw that the previous owner(s) had maintained good service habits and the internals of the 4.2 were in very good working order.

Good luck with your purchase!
__________________
2004 VW Passat 2.8L 30V 5-Speed
keithwbloom is offline   Reply With Quote
Old 02-22-2014, 06:14 AM   #3
AudiWorld Newcomer
Account #: 277542
 
Join Date: Feb 2014
Posts: 3
Default

I have an 06 S4 cab. Make sure the top is in good shape. If the glass seal starts to fail, you're looking at a new top. Very hard to fix them without a replacement. As you can imagine they're not cheap even after market. Also check the hinges on the glove box as the shocks cause the plastic on the glove box door to crack. It's $400 for new glove box plus installation but you could probably do yourself.
mgraziano1975 is offline   Reply With Quote
Old 02-22-2014, 06:14 AM
AudiWorld
Audi R8




Paid Advertisement
 
 
 
Reply

Tags
b6, cylinder, s4, scored, walls


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -8. The time now is 07:44 PM.


Copyright 2014 AudiWorld.com Audi Enthusiast Community

Personal Contacts

SEO by vBSEO ©2011, Crawlability, Inc.