geng77

Can I see pictures of 20" stock wheels with spacers?

iconoclast

plenty here:
https://forums.audiworld.com/q7-disc...*****-2867925/

you can do anywhere between 18-20mm front and 23-30mm rear.

make sure they're hubcentric and you purchase the extended bolts required to mount properly. use anti-seize grease on both sides of the spacers to avoid the pieces fusing together from heat or rust or any other variable.

geng77

thanks! i did look at that thread but couldn't find any pictures of stock height and 20" wheels with spacers. only 21 and 22's

iconoclast

rare... not too many people put spacers on and retain stock height... it draws attention to the wheel gap and makes the vehicle look taller. (IMO)

geng77

actually you have a point there. maybe it's a bad idea. heheh

iconoclast

even though the height doesn't change the wheel gap is accentuated because now you can see exactly where the tire ends but without the spacer it is recessed into the wheel well camouflaging the actual gap.