AudiWorld Forums - Hazard Flasher module replacement

AudiWorld Forums (https://www.audiworld.com/forums/)

- Audi allroad (https://www.audiworld.com/forums/audi-allroad-18/)

- - Hazard Flasher module replacement (https://www.audiworld.com/forums/audi-allroad-18/hazard-flasher-module-replacement-2775543/)

1SGHHC160

02-09-2010 02:18 PM

Hazard Flasher module replacement

Did not find allroad specific tech article on this DIY. Did see one on an A6. Can someone help me out with the AR? Sounds like Paulroad has been there, done that.

ar-Rings

02-09-2010 02:55 PM

Same as -

Gently pull the wood trim (6 clips, 3 along the bottom and three on top) I used some autobody specific tools I have. I did break 1 clip (very fragile) glued it back on. The hazard switch itself has clips on each side, a gentle pry and a good pull will get it out.

location of those clips:

<img src="https://forums.audiworld.com/picture.php?albumid=94034&pictureid=208280">

1SGHHC160

02-09-2010 04:23 PM

AR-Rings, Thanks for the info and pic! Super response.

All times are GMT -8. The time now is 10:10 PM.