|
Rear bumper removal help.
I want to install parking sensors on my 08 A6 and wanted to see if anyone has ElsaWin or any other info which can assist me in disassembling rear bumper. Thanks.
|
Originally Posted by royclark
(Post 24106283)
https://forums.audiworld.com/picture...ctureid=229253
15 FIXINGS HOLD THE REAR BUBPER ON. WHEN YOU HAVE REMOVED ALL OF THE FIXINGS, GIVE THE SIDES OF THE BUMPER A SHARP PULL DOWNWARDS AND THE BUMPER WILL SEPARATE FROM THE BODY. PULL THE BUMPER REARWARDS. I PLACED A DUVETT ON THE FLOOR BELOW THE BUMPER. https://forums.audiworld.com/picture...ctureid=229258 https://forums.audiworld.com/picture...ctureid=229254 https://forums.audiworld.com/picture...ctureid=229255 FINAL RESULT https://forums.audiworld.com/picture...ctureid=229257 https://forums.audiworld.com/picture...ctureid=229256 |
Yes, thank you, this can't get more detailed. I will install next weekend.
|
Originally Posted by audia6s
(Post 24106518)
Yes, thank you, this can't get more detailed. I will install next weekend.
|
Originally Posted by am_ver
(Post 24106572)
Can you please take pics and do a DIY? thanks!
https://www.audiworld.com/forums/sho....php?t=2799074 |
Anyone have pics on how to remove rear bumper? I already done this last year but need to replace one sensors but somehow Roy's pictures are gone:(
|
1 Attachment(s)
Have a look at the attached PDF, it should help:)
|
Originally Posted by cebo0650
(Post 24336936)
Have a look at the attached PDF, it should help:)
|
13 Attachment(s)
Originally Posted by audia6s
(Post 24106116)
I want to install parking sensors on my 08 A6 and wanted to see if anyone has ElsaWin or any other info which can assist me in disassembling rear bumper. Thanks.
15 FIXINGS HOLD THE REAR BUBPER ON. WHEN YOU HAVE REMOVED ALL OF THE FIXINGS, GIVE THE SIDES OF THE BUMPER A SHARP PULL DOWNWARDS AND THE BUMPER WILL SEPARATE FROM THE BODY. PULL THE BUMPER REARWARDS. I PLACED A DUVETT ON THE FLOOR BELOW THE BUMPER. Attachment 79040 Attachment 79041 Attachment 79042 Attachment 79043 When you have removed the rear bumper, you will see that the positions for the reversing sensors are marked. I used Cobra sensors. (Off ebay) Just follow the instructions and you can't go wrong. Attachment 79044 I drilled the four holed (20mm) with a steped drill. Attachment 79045 Trace the reversing lighrt wire. to get your signal from. Attachment 79046 It is connected to the reversing light wire. (See arrow marked Reversing light wire) Put the gearshift into reverse then, with a circut tester find the live wire, If its the correct one the test light will go out when you take it out of reverse. https://forums.audiworld.com/picture...ctureid=228774 http://i1263.photobucket.com/albums/...itags027-1.jpg Attachment 79047 Attachment 79048 The four sensor wires are run into the trunk through the rubber grommet (shown here - see arrow - through grommet) THIS GOES DIRECTLY INTO THE TRUNK. https://forums.audiworld.com/picture...ctureid=228816 It is connected to the reversing light wire. (See arrow marked Reversing light wire) Put the gearshift into reverse then, with a circut tester find the live wire, If its the correct one the test light will go out when you take it out of reverse. https://forums.audiworld.com/picture...ctureid=228774 http://i1263.photobucket.com/albums/...itags023-1.jpg Attachment 79049 Attachment 79050 Attachment 79051 |
Got everything fixed today. Thank you once again.
|
| All times are GMT -8. The time now is 02:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands