Hub Rings 07 S8
Guys I just got some wheels and they are 66.6. Has anyone purchased hub rings off of ebay I need aluminum ones and I need to know where I can go to get a good set I need to go from 57.1 to 66 .6.
|
in my experience, plastic is better than aluminum for these. They last longer and never get stuck.
|
Agreed plastic is the better choice
|
Really? I thought the metal ones would have been better. I will try the plastic ones first. Is there a good place to get them or is ebay good.
|
I've had the opposite experience with hub rings. I have always run custom wheels with every car I've owned since the mid 80's. Plastic rings deform over a period of time and you have to replace them every so often. The aluminum ones do not. I've run the same set of aluminum rings for almost 10 years on my D2. I had to have them custom made back then for about $100 a set including shipping. The only thing you do is use anti-seize on the hub so they do not "get stuck."
|
Originally Posted by Rccooke
(Post 24510774)
Guys I just got some wheels and they are 66.6. Has anyone purchased hub rings off of ebay I need aluminum ones and I need to know where I can go to get a good set I need to go from 57.1 to 66 .6.
I'm just curious, the 57.1, that a A8 "Hub Center Bore" and the 66.6 is that like a MERCEDES BENZ wheel? I'm really just curious as to what vehicle, that's from. Thanks |
Originally Posted by viper04
(Post 24511294)
Rccooke
I'm just curious, the 57.1, that a A8 "Hub Center Bore" and the 66.6 is that like a MERCEDES BENZ wheel? I'm really just curious as to what vehicle, that's from. Thanks |
Most all Audis are now on the larger bore
Started with the A5 and on to Q5, and then rolled back through A4, D4 A8, and C7 A6. Audi never really explained the "why." but the bearing was probably growing in diameter at the same time on the other side of the hub face.
|
All times are GMT -8. The time now is 03:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands