HRE wheel fitment question
Looking into some HRE S104 wheels. Wondering if these will fit my 2013 S6. Can anyone let me know if these will fit? I already have spacers (12F/15R) but not sure if I'll need them with these offsets. Thoughts?
FRONT: 20x9.5 ET 28 REAR: 20x11 ET 33 |
Originally Posted by mik34
(Post 24518807)
Looking into some HRE S104 wheels. Wondering if these will fit my 2013 S6. Can anyone let me know if these will fit? I already have spacers (12F/15R) but not sure if I'll need them with these offsets. Thoughts?
FRONT: 20x9.5 ET 28 REAR: 20x11 ET 33 |
Do a forum search for HRE. Lots of guys running various configurations. I would be careful about running different widths front versus rear.
I am personally running P44SC in a 20 x 9.5 with ET 47 offset to most closely match the OEM wheel offset. |
It's going to depend on the tires/tread size you're running as well.
My P44SCs are 21x9.5" ET40 with 265/30/21 Michelin Pilot Super Sports. I went with the same offset all around so I can rotate the wheels/tires. I also recently added 6mm spacers in the rear, and the fitment is now flush (pretty much right to the fender edge). I just received 4mm spacers to add to the front wheels. |
Originally Posted by CreoS4
(Post 24519118)
It's going to depend on the tires/tread size you're running as well.
|
Originally Posted by S4thrills
(Post 24519127)
I've seen quite a disparity on this as well. I am also running PSS's but I am running a 275 tire on mine. I see other guys who run as narrow as 255's on their HRE's.
|
All times are GMT -8. The time now is 09:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands