AudiWorld Forums

AudiWorld Forums (https://www.audiworld.com/forums/)
-   Audi 4000 / Coupe GT Discussion (https://www.audiworld.com/forums/audi-4000-coupe-gt-discussion-29/)
-   -   Commemorative Design (Edition) (https://www.audiworld.com/forums/audi-4000-coupe-gt-discussion-29/commemorative-design-edition-2219008/)

AudiSport4000 02-10-2006 08:17 AM

Commemorative Design (Edition)
 
<img src="http://i39.photobucket.com/albums/e189/AS4k/CEPage3.jpg">

<img src="http://i39.photobucket.com/albums/e189/AS4k/CEPage2.jpg">

<img src="http://i39.photobucket.com/albums/e189/AS4k/CEPage1.jpg">

<img src="http://i39.photobucket.com/albums/e189/AS4k/CEPage.jpg">


I thought you guys might enjoy some fun literature :D

tankman86 02-10-2006 10:46 AM

bitchen

maartenmoerman 02-10-2006 11:37 AM

Re: Commemorative Design (Edition)
 
could you make them in a higher resolution, so I can print them out? like 300 dpi?

AudiSport4000 02-10-2006 12:35 PM

Thats as high as I could go
 
I even scanned them as "progressive" so they would be even better quality.

maartenmoerman 02-10-2006 12:49 PM

Re: Thats as high as I could go
 
too bad :(

we never got them in europe... at least i've never seen one over here

Tom Serrago 02-10-2006 12:53 PM

I never saw the literature before. Nice piece of Audi history.

Houpty 02-11-2006 09:06 PM

I am going to be selling my Commemorative Design Coupe GT soon if anyone here is interested.
 
<center><img src="http://pictureposter.audiworld.com/66387/coupe_gt_front_2.jpg"></center><p>I just finished my mechanical engineering degree and I am probally going to be moving away depending on the job I get, so I feel I need to unload the car.

I have turbocharged the engine and it runs on boost but the project is by no means finished, such as the intake plumbing all needs to be redone in silicone and aluminum tubing and the exhaust system needs work because the turbo downpipe does not match up with the stock converter flanges. The car was really ragged on when I got it and didn't even run. I have done a lot of work to it but it could still use more love.

I am only looking to get a couple hundred dollars out of it. I am not even trying to get back what I put in in parts if fixed it up with. My "asking" price was going to be $500.

I have been working to clean it up a little to be more presentable before I start advertising it around here. I just wanted to see if any body on the forum would be interested in picking this up.

I am located in South Carolina right below Charlotte, NC. Shoot me an email if you are interested otherwise I will let the forum know what the fate of the care is.

Dave
CostelloME@gmail.com

quattrocoach 02-12-2006 09:01 AM

You got mail


All times are GMT -8. The time now is 02:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands