Upper Radiator Hose Removal
Hello,
New here, I have a 05 A6 and I broke the nipple off of my upper radiator hose (see pic) so I've ordered the new hose, but I've never seen this type of coupler before. How do I remove this hose? I'm sure it's something simple, but before I destroy the radiator I thought I'd ask. I've looked through the forum and didn't see anything but if I missed it, please point me in the right direction. http://img211.imageshack.us/img211/1...9161028833.jpg Thanks, Russ |
2 Attachment(s)
Originally Posted by 05audiA6
(Post 24378157)
Hello,
New here, I have a 05 A6 and I broke the nipple off of my upper radiator hose (see pic) so I've ordered the new hose, but I've never seen this type of coupler before. How do I remove this hose? I'm sure it's something simple, but before I destroy the radiator I thought I'd ask. I've looked through the forum and didn't see anything but if I missed it, please point me in the right direction. http://i1263.photobucket.com/albums/...g?t=1354361444 Thanks, Russ I can't see much detail on your picture. Is this the setup? <TABLE cellSpacing=0 cellPadding=0 width="100%"><TBODY><TR><TD class=spalte-text><TABLE class="cc abstand-kap einzug-standard"><TBODY><TR><TD class=titel-kap></TD></TR></TBODY></TABLE>Removing</TD></TR></TBODY></TABLE> <TABLE cellSpacing=0 cellPadding=0 width="100%"><TBODY><TR><TD class=spalte-text><TABLE class="cc einzug-standard abstand-standard "><TBODY><TR><TD class=einzug-liste>– </TD><TD>Lift retaining clip -arrow- and disconnect coolant hose (front left) from radiator.</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE> Attachment 78905 <TABLE cellSpacing=0 cellPadding=0 width="100%"><TBODY><TR><TD class=spalte-text><TABLE class="cc bild-titel einzug-standard abstand-standard"><TBODY><TR><TD>Connecting coolant hose with plug-in connector</TD></TR></TBODY></TABLE><TABLE class="cc einzug-standard abstand-standard "><TBODY><TR><TD class=einzug-liste>– </TD><TD>Remove old O-ring -2- from coolant hose -3-.</TD></TR></TBODY></TABLE><TABLE class="cc einzug-standard abstand-standard "><TBODY><TR><TD class=einzug-liste>– </TD><TD>Lightly lubricate new O-ring with coolant and fit O-ring in coolant hose.</TD></TR></TBODY></TABLE><TABLE class="cc einzug-standard abstand-standard "><TBODY><TR><TD class=einzug-liste>– </TD><TD>Press coolant hose onto connection -1- until it engages audibly.</TD></TR></TBODY></TABLE><TABLE class="cc einzug-standard abstand-standard "><TBODY><TR><TD class=einzug-liste>– </TD><TD>Press coolant hose in again and then pull to check that plug-in connector is correctly engaged.</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE> Attachment 78906 |
Yes, that helps a lot. The nipple snapped off with hardly any pressure, so I'm glad it happened in my driveway and not on the road.
Thanks |
Thanks!
Thanks guys, this thread really helped me out.. The nipple on my radiator hose broke off as well and I freaked seeing all of the antifreeze leaking out of my car, but it's all fixed now thanks to this thread!
Thanks Again |
All times are GMT -8. The time now is 05:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands