Anyone with a 12V A4 2.8 -- please read this ////// 12V V6 Supercharger KIT!!
Hi,
I'm tired of not having the kind of power I want from my car... And I'm close to modding the rest of it exactly the way I want.. so I really don't want to sell this car and get another, where I get to start all over again. So, here's what I propose, if you are a 12V 2.8 V6 owner, and would be willing and able to pay about $4000-5000 for a tested supercharger kit, please email me. I will send this list to tuners who are willing to develop a kit once they see there is a lot of interest in it. Here's what I'll need: name email address, phone number where you can be reached car -- auto or not, quattro or not. (I need this info so tuners can verify it) I'll do the legwork, I'll call the tuners, I'll harass their staff day and night. All I need is your support. Also, if you don't have the money now, it doesn't matter. Even if research and development started today, a supercharger probably wouldn't be available for about a year. PLEASE EMAIL ME OFF THE AUDIWORLD BOARD AT MWZVIPER@AOL.COM -Waseem |
Some guy did a turbo...
He had a TON of problems with the Hitachi controller IIRC.
You may want to contact him to see what kind of trouble he ran into.<ul><li><a href="https://forums.audiworld.com/performance/msgs/29027.phtml">turbo'd 2.8 12v post</a></li></ul> |
Rimmer started to work on one, but last i heard the have delayed it
|
yup... their kit would probably have sucked anyway. They weren't modifying the engine management
system.
|
Stay away from rimmer, last I heard they had serious problems
|
me too, but I got that info from a competitor, so I wasn't sure how seriously to take it.
|
Got to www.i-club.com and do a search on rimmer
|
Re: Anyone with a 12V A4 2.8 -- please read this ////// 12V V6 Supercharger KIT!!
There is a Supercharger now available for the 2.8 12V that yields an incredible 300+ HP. I have been spoeaking with the installer, and the manager of sales. The kit is sold by http://www.motodyne.com/ they claim it is safe, and have upgrade pulley kits available to increase boost. Boost is about 7lbs-12lbs depending on preference. the price is around $4999.00. The mechanic I spoke with said that the Supercharger is more powerful than the PES for the 30V HMMMMM. Lets keep this a secret. Demand is said to be high, I believe him since it took him a week to respond to my email.
Here is the email message that he sent me the other day. Jason: Currently available is the 12v supercharger kit. The 30v kit is in a testing phase and will be available to the public in a few months. Our 30v kit is an intercooled kit and is producing very high performance gains. If you are concidering a 30v supercharger, our first few kits on the market will come with free installation. In regards to your querry concerning the 12v supercharger. We currently carry a pulley upgrade kit to run much higher boost, So you can achieve 300+ HP. Because of popular demand the 12v supercharger and its accessories are at near back-order status. Hope to hear from you soon. Thank you for your interest, --Raymond Keely (Sales Manager) RHHKeely@MotoDyne.com www.MotoDyne.com Heres the other message: otodyne supercharger kit for the Audi 12 valve 2.8. Eaton supercharger: unit was designed for our application. It is very similar to the Eaton used On the Mercedes Benz Kompressor. Motodyne intake manifold. Replaces factory intake manifold. Msd BTM (Boost Timing master) cockpit controlled timing advance and retard, is interfaced with factory ignition controls. Ignition curve will be proportional to boost, just like a factory Turbo Audi. FMU Fuel control is handled by an FMU. Fuel Management Unit. Like the MSD boost-timing master this also can be tuned, according to octane, altitude, and other current or future modifications made to the car. Why not chip the ECM? Why not add bigger injectors? Being that the air meter is calibrated to fuel injector size, changing fuel injectors would warrant a new air meter, And New Software in the moronic. This can be done, but your cars Factory Motronic still cannot sense boost pressure. To do this a New Motronic similar to the 92-97 S4-S6 would be needed, GIAC code similar to the RS2 code, but configured to run a 6 cylinder, not the turbo 5. The New S4 code was developed for OBDII (on board diagnostics) and cannot be shared easily. Once this was solved the software still became an issue, vehicle weight 100, A4, 90, Avant, cabriolet. And lastly but very important manual transmission or Automatic Heavy testing and realistic thinking, to make this a reliable, safe, and affordable kit. We choose to interface the factory Engine management, with the MSD BTM , and FMU, both are tunable, but have fixed starting and ending points for safety, Boost: (higher Psi levels) above 7psi. This is obtained by changing the pulley. 7psi was chosen for a stock motor with factory Compression ratio. Yielding 285 Hp Price: 4,799.94 complete kit with all instructions(CD ROM) and hardware. www.motodyne.com. Soon to be featured in Euro car magazine, An overwhelming response to this new kit, Has our phone lines busy, We apologize if we did not get back to you promptly. Dealer Installation available in NJ and PA 856-429-0151 Rob, (856) 429-9763 Anthony |
All times are GMT -8. The time now is 05:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands