LED interior light upgrades
I'd like to get more light into the cargo area when the rear hatch is open.
Anyone swap out their stock bulbs with LED bulbs? If so where did you get them from, and the part numbers would be a big help. Thanks |
Originally Posted by Q5 TDI
(Post 24506039)
I'd like to get more light into the cargo area when the rear hatch is open.
Anyone swap out their stock bulbs with LED bulbs? If so where did you get them from, and the part numbers would be a big help. Thanks |
For interior lights do not need CAN BUS Error Free LED, only for exterior lighting
You need W5W 12v5W LED |
Originally Posted by spijun
(Post 24506060)
For interior lights do not need CAN BUS Error Free LED, only for exterior lighting
You need W5W 12v5W LED |
Originally Posted by AudiQ5sleeper
(Post 24506088)
depends on what type of LEDs the OP gets. I think the cheap LEDs will flicker or stay on but very very dim.
Many sellers charge a lot more expensive bulbs CAN BUS Error Free |
Originally Posted by spijun
(Post 24506104)
I did not wrote expensive or cheap LED bulbs, but only for internal lighting do not need CAN BUS Error Free
Many sellers charge a lot more expensive bulbs CAN BUS Error Free And for the OP...you'll need 3x T10 LEDs for the trunk/hatch area. You can get it on eBay for around $5 for some really bright ones. |
Originally Posted by spijun
(Post 24506104)
I did not wrote expensive or cheap LED bulbs, but only for internal lighting do not need CAN BUS Error Free
Many sellers charge a lot more expensive bulbs CAN BUS Error Free |
Originally Posted by AudiQ5sleeper
(Post 24506351)
I think it would be best to have the can bus error free bulbs.
Why, which's the reason ? Because of this you pay more, or ....????? |
Originally Posted by spijun
(Post 24506360)
Ok I respect your decision
Why, which's the reason ? Because of this you pay more, or ....????? |
Originally Posted by AudiQ5sleeper
(Post 24506390)
LED bulbs stays dim even when the car is off. its just weird. maybe I should send you a pic later tonight lol
LED error free have built-in resistor that does not give the error in the system, but it is only for outdoor lighting do not know how this will help |
All times are GMT -8. The time now is 11:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands