Theoretical top speed of B6 A4 Quattro fitted with a 6 speed gear box?
#11
here's a nice toy. this shows the S4/B5 6 speed but you can enter your own info
<ul><li><a href="http://www.car-videos.net/tools/speedrpm.asp?Car=Select&Num1=205&Num2=55&a mp;Num3=16&AxleRatio=4.111&Ratio1=3.5& Ratio2=1.889&Ratio3=1.231&Ratio4=.967& Ratio5=.806&Ratio6=.684&Ratio7=&Redlin e
#12
That table is AMAZING...Specs for B6 6 speed inside this link...
Save this one to your favourite list.
Big thanks to JAFO for this one<ul><li><a href="http://www.car-videos.net/tools/speedrpm.asp?Car=Select&Num1=235&Num2=45&a mp;Num3=17&AxleRatio=4.111&Ratio1=3.5& Ratio2=1.889&Ratio3=1.320&Ratio4=1.034& ;Ratio5=.857&Ratio6=.730&Ratio7=&Redli n
Big thanks to JAFO for this one<ul><li><a href="http://www.car-videos.net/tools/speedrpm.asp?Car=Select&Num1=235&Num2=45&a mp;Num3=17&AxleRatio=4.111&Ratio1=3.5& Ratio2=1.889&Ratio3=1.320&Ratio4=1.034& ;Ratio5=.857&Ratio6=.730&Ratio7=&Redli n
#14
Re: B6 S4 Gearbox for 1.8T...will that fit?
Bolted up with one small mod that took 5 seconds to engine block.
tail shaft has to be shortened, this can be done for a few hundred bucks.
you will need new shifter linkages and shifter.
if you have a b6, the existing drive shafts should bolt up.
And you have to check where your speedo input is taken from on your car, if its taken from abs sensor then no probs.
tail shaft has to be shortened, this can be done for a few hundred bucks.
you will need new shifter linkages and shifter.
if you have a b6, the existing drive shafts should bolt up.
And you have to check where your speedo input is taken from on your car, if its taken from abs sensor then no probs.
Thread
Thread Starter
Forum
Replies
Last Post
quattrorally
A4 (B6 Platform) Discussion
2
06-25-2007 06:41 PM
Quattro4lifeAus
A4 (B6 Platform) Discussion
10
12-22-2006 11:42 AM
audirookie
A4 (B5 Platform) Discussion
7
04-08-2004 11:12 AM