Jason @ Streetwerke

<center><img src="http://www.streetwerke.com/images/shop_2.jpg"></center><p>
Often, people assume we only do high performance work at Streetwerke. That's not the case, since we also do the traditional service and maintenance. So give us a call if you need that timing belt service, minor service, or that brake job. To obtain a quote or schedule an appointment, call us at 650-739-0820<ul><li><a href="http://www.streetwerke.com/contact.html">Contact info here.</a></li></ul>

Dmitry D.

Hey Jason how much would be to flash a 100 octane over my stock program? or to just add 3rd program?

S4Del

What about dnyo'ing. You guys ever do that on a Sat, or do I have to come in during the week?

audiconvert

I've got the below vag-com info. The car doesn't start (A6, 2001, 6sp, APR stg 1 installed by streetwerke). My question is if I replace the O2 sensors will that allow my car to start and run or should I just go ahead and have it towed to be fixed?

17539 - Oxygen (Lambda) Sensor; B2 S1: Internal Resistance too High
P1131 - 35-10 - - - Intermittent

17521 - Oxygen (Lambda) Sensor; B1 S1: Internal Resistance too High
P1113 - 35-10 - - - Intermittent

16684 - Random/Multiple Cylinder Misfire Detected
P0300 - 35-00 - -

16686 - Cylinder 2: Misfire Detected
P0302 - 35-00 - -

16688 - Cylinder 4: Misfire Detected
P0304 - 35-00 - -

Chris.Ranch

I went in for the same thing. I had two programs, stock and 91 chipped. I wanted 100 and valet. Darren is da APR man, and found that I already had a full set of four programs, stock, 91, 100 and 104. Don't know why they weren't showing up. Since I already had four slots with four programs, he reflashed it the way I wanted it (stock, 91, 100, valet).

And since I already had the slots, there wasn't a charge. Streetwerke is straight up! Thanks, Darren, Jeff and Jason!!!

Chris

Chris.Ranch

I'd like to see where I am with 100oct. Gotta be better than 215.6 whp, 283.5 wtq on the 91 program.

Now that I have a boost guage (and another tank of 100), the 91 program spikes boost to about 16psi, then immediately tapers to about 13psi. The 100 oct program spikes to just under 18, and keeps it over 16. Butt dyno definitely feels it, especially with how it keeps pulling at higher revs.

Chris

Dmitry D.

Cool gotta give them a call.

Chris.Ranch

tons o' fun!

You do have the level 10 tip, right? ;-)

Dmitry D.

Lol lvl 10 yea right.

Dmitry D.

Which reminds me I need to install my boost gauge.