Good day Dana

He are the error codes
Tuesday,03,February,2015,20:21:35:65217
VCDS Version: Release 12.12.0
Address 55: Xenon Range Labels: 8T0-907-357.clb
Control Module Part Number: 8H0 907 357 C HW: 8H0 907 357 C
Component and/or Version: AFS 1 H01 0040
Software Coding: 0000255
Work Shop Code: WSC 06324 000 00000
Additional Info: ----------- AFS-Modul links ----------- AFS-Modul rechts
VCID: 32610288ADD1A08E527-8067
2 Faults Found:
01042 - Control Module; Not Coded
000 - - - MIL ON
Freeze Frame:
Fault Status: 11100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 40
Mileage: 127553 km
Time Indication: 0
Date: 2015.02.03
Time: 20:17:53

01539 - Headlights Not Adjusted
005 - No or Incorrect Basic Setting / Adaptation - MIL ON
Freeze Frame:
Fault Status: 11100101
Fault Priority: 2
Fault Frequency: 1
Reset counter: 40
Mileage: 127553 km
Time Indication: 0
Date: 2015.02.03
Time: 20:17:53

Good day Dana
I have a 2010 audi q5 with bixenon decided to try the afs adaptive light retrofit ,,
I'm having a bit of problem with coding the module
wodering if i can get some help me those are the fault codes I'm getting
I did the pin outs already got the headlights and the AFS module
I have a new set of headlights
Have a new afs module

:8H0907357C
Did the pin outs as per this write up

https://www.audiworld.com/forums/vag...rofit-2822341/

But it seems like I cannot code the module no matter what I try
It's not accepting the coding
I go to adptation and module not coded
When I go to xenon range
I don't see the option for on/off/on
I will post the error s on another message as its too long for this private message