When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi Andy,
My air suspension compressor is leaking from the side plate that covers the crank. I drilled out the rivets that hold it in place, cleaned up the metal surfaces and rubber gasket and put back in car. It's better but it still leaks.
I did replace the piston ring which I bought from another seller that was able to over night the part for me. My apologies for not buying from you but I need my car for work and couldn't wait.
Wondering if you have come across this problem and know if a high pressure sealant or something else that can fix this issue.
Hi andy,
I am looking to test the front left levelling sensor on a 2004 allroad. I read in one of the forums you have a wiring diagram. It's only 4 wires I was hoping to test it or if you know if they are repairable as new ones in Australia are A$400.
Can you let me know if you have anything to help.
Ps - your repair kit for the compressor worked a treat.
Hi Andy
Looking through the posts it looks like you know all there is about the all road compressor . I have a problem that is driving me mad and wonder if you could help ? I replaced my pump connected up and all good . But after the first run it stopped ! If I connect the pump direct all is well goes up and down as it should . I have looked for fuse and relay ( not sure I have found them but can not find anything that has blown . Any ideas ?
Many thanks
David
I have the thread about your compressor rebuild kit for sale for a 2003 AllRoad. You mentioned I could send it back for a refund. I'll do that! What address should I send it?
Hi Andy,
I'm already booked last item on ebay.
I need repair kit for Allroad. Is it necessary to add more detail from my side? If yes, my e-mail rudevsky@gmail.com
Thank you, Roman