1 slow Audi

here are some pictures of my car
<img src="http://www.magnusmotorsports.com/images/custcars/Radim/radim1.jpg">
<img src="http://www.magnusmotorsports.com/images/custcars/Radim/radim2.jpg">
<img src="http://www.magnusmotorsports.com/images/custcars/Radim/before%20Intake.jpg">
<img src="http://www.magnusmotorsports.com/images/custcars/Radim/With%20Intake.jpg">
<img src="http://www.magnusmotorsports.com/images/custcars/Radim/Frontal.jpg">

Audi_VW_Porsche

can't wait to hear all the kills you rack up...

Žob

Who made that exhaust manifold and what turbo is that?

1 slow Audi

I own a shop in Toronto and thats what I do I build Hi horsepower turbo cars.
Everything you see is build by me .My shope is caled Metalex Motorworx The turbo is custom made by J&R tuning in Toronto it is K26 with a 15deg. clip and a T-04 60trim compresor wheel, we cal it the Special K and it is a direct bolt on to the stock manifolf.

Žob

That will bolt a K26 up. I need to have a custom manifold made for a LARGE turbo ie K27 size. I'm aiming for 450hp out of the 20v T

1 slow Audi

Ya I could have used the RS2 manifold but originaly I had T-3/T-04 in it than I went back to KKK. It has les lag and dual turbine seals plus I used that T-3/T-04 (was brand new) on a customers car (2g Talon) cause he had his hart set on it.
And custom allways looks and works better, and since I make them it didnt cost me even close what a RS2 wowld.

Žob

Would you be interested in making something similair for me in the future?

1 slow Audi

sure why not Im gona make pictures of it tommorow
I just came back from the turbo shop and Im ging even bigger on the turbo its K26/T78 will post pictures later this week.