i love getting parts!!!
#1
AudiWorld Super User
Thread Starter
Join Date: Feb 2004
Posts: 4,755
Likes: 0
Received 0 Likes
on
0 Posts
i love getting parts!!!
<center><img src="http://pictureposter.audiworld.com/107720/bbk_parts_002.jpg"></center><p>i need to buy a few more parts before i can get these installed.
#4
AudiWorld Super User
Thread Starter
Join Date: Feb 2004
Posts: 4,755
Likes: 0
Received 0 Likes
on
0 Posts
anyone here using the zimmermann rotors? they are going for $88.40 on autohausaz. will the offset
be different then the stock rotors? can i use bigger rotors (269x22mm) in the rear? what is the stock size rear rotors?
#7
Tough to tell, it somewhat depends on the concave shape of the spoke too....
I know the celebrations are fairly flat though. I'd just unbolt one caliper and mock things up or... if you have the rotors you can also put the caliper on w/the pads and set the wheel on the rotor. I did the same while testing my fitment (I need 8mm spacers).
<img src="http://audisscott.com/abt_brake.jpg">
<img src="http://audisscott.com/abt_brake.jpg">
Trending Topics
#9
I'm running OEM size zimmermans from ECS....
Have been for 3 or 4 years. NOt worn a lip of any kind. Absorb and dissapate heat well.
No complaints in OEM replacement versions.
Used OEM brembo's of the GTI VR6, but was an autocross and track ***** as well as a daily driver.
Not scared of the z's, but will go to Brembos when I do the brake upgrade....
No complaints in OEM replacement versions.
Used OEM brembo's of the GTI VR6, but was an autocross and track ***** as well as a daily driver.
Not scared of the z's, but will go to Brembos when I do the brake upgrade....
#10
Don't forget you need to swap the bleed nipples and cross over tube on those calipers
The 928GTS calipers are meant to mount on the back side of the rotor, but our brakes mount on the front. They will be upside down if you don't swap them.
The arrow cast in the caliper shows the direction of rotation of the rotor.
The arrow cast in the caliper shows the direction of rotation of the rotor.
Thread
Thread Starter
Forum
Replies
Last Post
AreS4 calipers and brackets + 256x22mm rotors + stock A4 pads the right combo? Do I need spacers...?
JPRobertsons
A4 (B5 Platform) Discussion
12
02-14-2008 09:05 AM
spedrcr
Audi Original "S" Cars
7
01-07-2008 01:07 PM
90/90Qs
Audi 90 / 80 / Coupe quattro / Cabriolet
3
10-16-2005 12:00 PM
quattrofrog
A4 (B5 Platform) Discussion
2
03-23-2004 04:49 PM