O2 sensor spacer project... not so good. What now?
#12
from 3 years ago... $20 in O2 bungs for piggies .. I said bungs.. heheheh
<center><img src="http://pictureposter.audiworld.com/66625/modified_o2_bung_locations_id.1.jpg"></center><p>
only works for secondary )2, you can buy the bosch universals for $50 to replace the primaries. $100 for both banks
only works for secondary )2, you can buy the bosch universals for $50 to replace the primaries. $100 for both banks
#13
There is a process to build these. Not super hard, but one must be drilled.
Search both this board as well as the RS4/S4 B5 board for "Antifouler" or "anti-fouler". I'd also look on the EdyJun S4 page, and possibly also on Stoney's links. There are certainly many pages referencing the construction of these.
By the way, I prefer to weld the antifoulers together after I drill the top antifouler and then screw them together. Welded or not, a shot of high temp paint is mandatory - otherwise they will literally rot out. Same with antisieze - liberal application on the threads is mandatory.
Hope this helps.
By the way, I prefer to weld the antifoulers together after I drill the top antifouler and then screw them together. Welded or not, a shot of high temp paint is mandatory - otherwise they will literally rot out. Same with antisieze - liberal application on the threads is mandatory.
Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
homer-j-fong
S4 / RS4 (B5 Platform) Discussion
3
03-05-2007 03:05 PM
O2 Sensor Question. I have heard that O2 sensors after cats rarely go bad unless the cats have died.
MarkW
S4 / RS4 (B5 Platform) Discussion
0
11-02-2005 12:15 PM