help for new owner
#4
AudiWorld Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Wow Thanks for the quick response, but one more question
wow thanks for the quick response. I have found it now. Just one more thing!! How do i remove the engine cover its a V6 two colour cover and doesnt seem to have any fixings visible, any ideas ? Thanks
#5
AudiWorld Expert
the engine cover...
...in the center of the engine with the "V6 BiTurbo" are held in by twist pegs that look like a philips screw. Just turn 90 degrees, and they should release. I think there is a clip underneath as well that just releases when you pull up.
The small "pegs" are in the small holes (2 per cover) in the picture below...
<img src="http://i285.photobucket.com/albums/ll44/norcalag/2003%20Audi%20AllRoad%20black%2066K/engine.jpg">
The small "pegs" are in the small holes (2 per cover) in the picture below...
<img src="http://i285.photobucket.com/albums/ll44/norcalag/2003%20Audi%20AllRoad%20black%2066K/engine.jpg">
#6
AudiWorld Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Re: the engine cover...
That doesnt look like my cover, it is not the Bi Turbo V6 single turbo V6. It is a silver cover with a black centre panel no fixings are visible at all.
Trending Topics
#9
AudiWorld Expert
Sorry...I am not familiar with the engines from that side of the pond!!!
my guess is that there are clips underneath that fasten to hoses/piping, and you just have to lift it up.
Is this your cover???
<img src="http://img.photobucket.com/albums/v739/hliu55/reference/98ona625v6engine.jpg">
Is this your cover???
<img src="http://img.photobucket.com/albums/v739/hliu55/reference/98ona625v6engine.jpg">
#10
AudiWorld Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sorry...I am not familiar with the engines from that side of the pond!!!
its similar but does not have the 4 round marks, and someone has tried to lift it up and caused the satrt of a small crack so dont want to pull too hard