Arnott O-ring size help!
07-28-2014, 09:00 AM
#1
AudiWorld Junior Member
Thread Starter
Join Date: May 2007
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Arnott O-ring size help!
Hi,
I have a busted INNER O-Ring between the outside of the front Arnott/Bilstein shock and the inside of the Aluminum CNC sleeve. (looks like there is a second o-ring near the very top of the CNC sleeve, the one I see leaking is the one that sits closer to the shock bottom.
Called Arnott and they don't sell the part nor can they tell me what size it is. I don't have the O-ring on hand to measure it..
Suggestions? where to buy once I find out?
this is the SK-2716 shock (not the airspring portion of the setup).
Thanks.
I have a busted INNER O-Ring between the outside of the front Arnott/Bilstein shock and the inside of the Aluminum CNC sleeve. (looks like there is a second o-ring near the very top of the CNC sleeve, the one I see leaking is the one that sits closer to the shock bottom.
Called Arnott and they don't sell the part nor can they tell me what size it is. I don't have the O-ring on hand to measure it..
Suggestions? where to buy once I find out?
this is the SK-2716 shock (not the airspring portion of the setup).
Thanks.
07-29-2014, 04:27 AM
#2
07-30-2014, 07:54 AM
#3
AudiWorld Member
Buy the OEM Audi!
Same size and at least so good. Sold with the upper Rubber block together.
Same size and at least so good. Sold with the upper Rubber block together.
Hi,
I have a busted INNER O-Ring between the outside of the front Arnott/Bilstein shock and the inside of the Aluminum CNC sleeve. (looks like there is a second o-ring near the very top of the CNC sleeve, the one I see leaking is the one that sits closer to the shock bottom.
Called Arnott and they don't sell the part nor can they tell me what size it is. I don't have the O-ring on hand to measure it..
Suggestions? where to buy once I find out?
this is the SK-2716 shock (not the airspring portion of the setup).
Thanks.
I have a busted INNER O-Ring between the outside of the front Arnott/Bilstein shock and the inside of the Aluminum CNC sleeve. (looks like there is a second o-ring near the very top of the CNC sleeve, the one I see leaking is the one that sits closer to the shock bottom.
Called Arnott and they don't sell the part nor can they tell me what size it is. I don't have the O-ring on hand to measure it..
Suggestions? where to buy once I find out?
this is the SK-2716 shock (not the airspring portion of the setup).
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
audijim113
A8 / S8 (D3 Platform) Discussion
8
10-22-2021 04:38 AM
