Too much poke?
#1
Too much poke?
Just got myself a new set of wheels. Love the way they look but I'm a little annoyed with myself that they poke a little. Wanted to know what others think.
Be honest guys, is this too much poke?
Front:
Back:
Side:
Be honest guys, is this too much poke?
Front:
Back:
Side:
#2
AudiWorld Senior Member
A bit too much. Especially in the front. Not bad though. Still looks good.
#3
I like the “poke” look. It’s not too much at all. People it’s opinion based and if you like it then who cares.
#5
Fronts look a little too much poke. Rears look fine to my eyes.
Any rubbing? I had some when I used 15mm spacers on the front with 275/30/20 et 30 wheels/tires. There is a bolt at the apex of the front wheel arch that would contact the outer edge of the tire on deep compressions of the front suspension. Swapped to a 10mm spacer in front and left the 15mm spacers in back. So far no more rubbing.
Any rubbing? I had some when I used 15mm spacers on the front with 275/30/20 et 30 wheels/tires. There is a bolt at the apex of the front wheel arch that would contact the outer edge of the tire on deep compressions of the front suspension. Swapped to a 10mm spacer in front and left the 15mm spacers in back. So far no more rubbing.
Trending Topics
#8
#9
Audiworld Basic Sponsor
I'm curious who recommended that to you. 11" is not a recommended wheel width for the 275/30R20 tire. I mean there are people who run tires beyond the recommended widths but often the lower so you can't see the tire stretch.
__________________
034Motorsport | ABT | Advan | AG | AWE | BBS | BC Forged | Brembo | Capristo | Deval | Forgeline | H&R | HRE | KW | Milltek | OZ | Sparco | Stoptech | Unitronic | Volk | Vorsteiner | Work
and many more
and many more